AEP-63 : 2009
Current
Current
The latest, up-to-date edition.
PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-04-2009
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
CHAPTER 1 - INTRODUCTION
CHAPTER 2 - SCOPE
CHAPTER 3 - NORMATIVE REFERENCES
CHAPTER 4 - DEFINITIONS
CHAPTER 5 - FIELD OF APPLICATION
CHAPTER 6 - REQUIREMENTS FOR QUALIFICATION
CHAPTER 7 - QUALIFICATION TESTS
CHAPTER 8 - PAINT IDENTIFICATION
CHAPTER 9 - TEST REPORT
ANNEX A
ANNEX B - SPECIFIC TEST METHODS
Specifies the performance requirements for non-skid performance and corrosion resistance by non-skid coating systems of ships exterior and interior decks exposed to the marine atmosphere. Also describes high durability protective non-skid coating systems for ships exterior and interior decks.
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
NATO
|
| Status |
Current
|
| STANAG 4698 : 2010 | PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS AND THEIR APPLICATION FOR NAVAL PLATFORMS |
| BS 381C:1996 | Specification for colours for identification, coding and special purposes |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| STANAG 1162 : 0 | VERTICAL REPLENISHMENT VERTREP OPERATING AREA MARKING CLEARANCES AND LIGHTING |
| ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
| ISO 6745:1990 | Zinc phosphate pigments for paints — Specifications and methods of test |
| ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| STANAG 1278 : 2017 | STANDARD FOR THE REQUIRED LEVEL AND MEASUREMENT OF COEFFICIENT OF FRICTION ON FLIGHT DECKS |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
| ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 6270:1980 | Paints and varnishes — Determination of resistance to humidity (continuous condensation) |
| ISO 3678:1976 | Paints and varnishes — Print-free test |
| ISO 9117:1990 | Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 2811:1974 | Paints and varnishes — Determination of density |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| STANAG 4602 : 2004 | FIRE ASSESSMENT OF MATERIALS |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| ISO 11908:1996 | Binders for paints and varnishes — Amino resins — General methods of test |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| MIL-STD-1623 Revision E:2006 | FIRE PERFORMANCE REQUIREMENTS AND APPROVED SPECIFICATIONS FOR INTERIOR FINISH MATERIALS AND FURNISHINGS (NAVAL SHIPBOARD USE) |
| ISO 1248:2006 | Iron oxide pigments Specifications and methods of test |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| ISO 3682:1996 | Binders for paints and varnishes — Determination of acid value — Titrimetric method |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| ISO 4629:1996 | Binders for paints and varnishes Determination of hydroxyl value Titrimetric method |
| ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 14680-1:2000 | Paints and varnishes Determination of pigment content Part 1: Centrifuge method |
| ISO 8502-9:1998 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| STANAG 1135 : 2017 | INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| ISO 8504-3:1993 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| ISO 10601:2007 | Micaceous iron oxide pigments for paints Specifications and test methods |
| ISO 14680-2:2000 | Paints and varnishes Determination of pigment content Part 2: Ashing method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.