ACI 506.2 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR SHOTCRETE
Hardcopy , PDF
28-11-2019
English
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.PART 1—GENERAL 1.1—Scope 1.2—Definitions 1.3—Referenced standards 1.4—Submittals 1.5—Preconstruction testing by Contractor 1.6—Testing during construction 1.7—Delivery, storage, and handling PART 2—PRODUCTS 2.1—Materials 2.2—Packaged shotcrete materials 2.3—Fiber-reinforced shotcrete 2.4—Shotcrete properties 2.5—Proportioning 2.6—Batching, mixing, and delivery PART 3—EXECUTION 3.1—Preparation of surface to receive shotcrete 3.2—Joints 3.3—Alignment control 3.4—Application 3.5—Finish 3.6—Curing 3.7—Protection 3.8—Tolerances 3.9—Repair of shotcrete 3.10—Acceptance of Wor (nonmandatory portion follows) NOTES TO SPECIFIER General notes
Includes the construction requirements for the application of shotcrete. Both wet-mix and dry-mix shotcrete are specified, and the minimum standards for testing, materials, and execution are provided.
| Committee |
506
|
| DocumentType |
Revision
|
| Pages |
16
|
| PublisherName |
American Concrete Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ACI ITG-9R : 2016 | REPORT ON DESIGN OF CONCRETE WIND TURBINE TOWERS |
| ACI 376 : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
| ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| CSA S448.1 : 2010 : R2015 | REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES |
| ACI 544.4R : 1988 | DESIGN CONSIDERATIONS FOR STEEL FIBER REINFORCED CONCRETE |
| CSA S448.1 : 2010 | REPAIR OF REINFORCED CONCRETE IN BUILDINGS AND PARKING STRUCTURES |
| CTI ESG 123 : 2012 | RECOMMENDED GUIDELINES FOR CONCRETE RESTORATION AND REPAIRS TO NATURAL AND MECHANICAL DRAFT COOLING TOWERS |
| ASTM C 1116/C1116M : 2010 | Standard Specification for Fiber-Reinforced Concrete |
| ACI 506.1R : 2008 | GUIDE TO FIBER-REINFORCED SHOTCRETE |
| ASTM C 1604/C1604M : 2005 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ASTM C 1604/C1604M : 2005 : R2012 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ACI 544.1R : 1996 | REPORT ON FIBER REINFORCED CONCRETE |
| ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
| ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
| ACI 506.3R : 1991 | GUIDE TO CERTIFICATION OF SHOTCRETE NOZZLEMEN |
| ACI 210R : 1993 | EROSION OF CONCRETE IN HYDRAULIC STRUCTURES |
| ACI 506.4R : 1994 | GUIDE FOR THE EVALUATION OF SHOTCRETE |
| ASTM C 1116/C1116M : 2010 : REV A | Standard Specification for Fiber-Reinforced Concrete |
| ACI 376M : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC) |
| ACI 308 : 92(R1997) | PRACTICE FOR CURING CONCRETE |
| ACI 334.3R : 2005 | CONSTRUCTION OF CONCRETE SHELLS USING INFLATED FORMS |
| ACI PRC-308 : 2016 | GUIDE TO EXTERNAL CURING OF CONCRETE |
| ASTM C 1480 : 2000 | Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application |
| ASTM C 1480 : 2000 : R2005 | Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.