ACI 351.3R:2018
Current
Current
The latest, up-to-date edition.
351.3R-18: Report on Foundations for Dynamic Equipment
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2018
Publisher
$141.28
Including GST where applicable
This document is limited in scope to the engineering, construction, repair, and upgrade of concrete foundations for dynamic equipment.
| Committee |
351
|
| DocumentType |
Standard
|
| ISBN |
9781945487989
|
| Pages |
80
|
| ProductNote |
THIS STANDARD ALSO REFERS:FEMA P-750,USACE EM 1110-2
|
| PublisherName |
American Concrete Institute
|
| Status |
Current
|
| Supersedes |
| ISO 10816-4:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings |
| ACI 349.1R : 2007 | REINFORCED CONCRETE DESIGN FOR THERMAL EFFECTS ON NUCLEAR POWER PLANT STRUCTURES |
| ACI 351.5 : 2015 | SPECIFICATION FOR INSTALLATION OF EPOXY GROUT BETWEEN FOUNDATIONS AND EQUIPMENT BASES |
| ACI 215R : 1992(R1997) | CONSIDERATIONS FOR DESIGN OF CONCRETE STRUCTURES SUBJECTED TO FATIGUE LOADING |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ASTM D 4015 : 2015 | Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices |
| ACI 228.2R : 2013 | REPORT ON NONDESTRUCTIVE TEST METHODS FOR EVALUATION OF CONCRETE IN STRUCTURES |
| API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ISO 10816-2:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ASTM A 193/A193M : 2016 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ISO 1940-1:2003 | Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balance tolerances |
| ISO 10816-5:2000 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pumping plants |
| ASTM A 615/A615M : 2015 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ACI 562 : 2016 | CODE REQUIREMENTS FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES AND COMMENTARY |
| ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
| ISO 10816-6:1995 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW |
| DIN 4150-3:1999-02 | VIBRATION IN BUILDINGS - PART 3: EFFECTS ON STRUCTURES |
| HI 9.6.4 : 2009 | ROTODYNAMIC PUMPS FOR VIBRATION MEASUREMENT AND ALLOWABLE VALUES |
| API 610 : 2004 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 684 :2005 | API STANDARD PARAGRAPHS ROTORDYNAMIC TUTORIAL: LATERAL CRITICAL SPEEDS, UNBALANCE RESPONSE, STABILITY, TRAIN TORSIONALS, AND ROTOR BALANCING |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| ISO 10816-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ |
| ISO 10816-1:1995 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines |
| ACI 307 : 2008 | DESIGN AND CONSTRUCTION OF REINFORCED CONCRETE CHIMNEYS AND COMMENTARY |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| ISO 10816-7:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ACI 351.1R : 2012 | REPORT ON GROUTING BETWEEN FOUNDATIONS AND BASES FOR SUPPORT OF EQUIPMENT & MACHINERY |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| DIN 4024-2:1991-04 | MACHINE FOUNDATIONS; RIGID SUPPORTING CONSTRUCTIONS FOR MACHINES WITH PERIODIC EXCITATION |
| ACI 364.1R : 2019 | Guide for Assessment of Concrete Structures before Rehabilitation |
| ACI 351.4 : 2014 | SPECIFICATION FOR INSTALLATION OF CEMENTITIOUS GROUTING BETWEEN FOUNDATIONS AND EQUIPMENT BASES |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ISO 2631-5:2004 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple shocks |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.