17/30353548 DC : 0
NA
Status of Standard is Unknown
BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing process
7 Requirements
8 Inspection
9 Test methods
10 Marking
Annex A (informative) - Steel grades and chemical
composition according to EN 10025-2, EN ISO 683-1,
EN ISO 683-2, EN ISO 683-3 and EN ISO 683-4
Annex B (normative) - Ruling sections for mechanical properties
Annex C (normative) - Supplementary or special requirements
Annex D (normative) - Methods for evaluating straightness
Annex E (informative) - Designation of steels given in this
standard and of comparable grades covered in various
designation systems
Bibliography
BS EN 10277.
| Committee |
ISE/105
|
| DocumentType |
Draft
|
| Pages |
62
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Standards | Relationship |
| PREN 10277 : DRAFT 2017 | Identical |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| SAC GB/T 699:2015 | QUALITY CARBON STRUCTURAL STEELS |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| SAC GB/T 8731 : 1988 | FREE-CUTTING STRUCTURAL STEEL |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| SAC GB/T 5216 : 1985 | STRUCTURAL STEEL WITH SPECIFIED HARDENABILITY BANDS |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| SAE J 406 : 2009 | METHODS OF DETERMINING HARDENABILITY OF STEELS |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| SAC GB/T 3077 : 1999 | ALLOY STRUCTURE STEELS |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.