16/30336547 DC : 0
NA
NA
Status of Standard is Unknown
BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Principles
5 Welding design
6 Welding and inspection personnel
7 Equipment and facilities
8 Welding procedure specification (WPS)
9 Weld inspection
10 Weld acceptance criteria
11 Welding process verification
12 Flight hardware production
13 Quality assurance
Annex A (normative) - Welding Procedure
Specification (WPS) - DRD
Annex B (normative) - Welding Verification
Test Plan (WVTP) - DRD
Annex C (informative) - Inner
defect calculation
Bibliography
BS EN 16602-70-39.
| Committee |
ACE/68
|
| DocumentType |
Draft
|
| Pages |
69
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Standards | Relationship |
| PREN 16602-70-39 : DRAFT 2016 | Identical |
| EN 60974-11:2010 | ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
| EN 16603-32-01:2014 | Space engineering - Fracture control |
| ISO 25239-5:2011 | Friction stir welding Aluminium Part 5: Quality and inspection requirements |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| ISO 3452-6:2008 | Non-destructive testing Penetrant testing Part 6: Penetrant testing at temperatures lower than 10 degrees C |
| ISO 14744-5:2000 | Welding Acceptance inspection of electron beam welding machines Part 5: Measurement of run-out accuracy |
| EN 60974-7:2013 | Arc welding equipment - Part 7:Torches |
| ISO 6848:2015 | Arc welding and cutting Nonconsumable tungsten electrodes Classification |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| EN 60974-12:2011 | Arc welding equipment - Part 12: Coupling devices for welding cables |
| ISO 25239-3:2011 | Friction stir welding Aluminium Part 3: Qualification of welding operators |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ISO 24394:2008 | Welding for aerospace applications Qualification test for welders and welding operators Fusion welding of metallic components |
| ASTM E 340 : 2015 : REDLINE | Standard Practice for Macroetching Metals and Alloys |
| ISO 15616-4:2008 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 4: Machines with 2-D moving optics |
| ISO 14744-3:2000 | Welding Acceptance inspection of electron beam welding machines Part 3: Measurement of beam current characteristics |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| EN 60974-6:2016 | Arc welding equipment - Part 6: Limited duty equipment |
| AWS D18.2 : 1999 | GUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBE |
| EN 60974-13:2011 | Arc welding equipment - Part 13: Welding clamp |
| EN 16601-40:2014 | Space project management - Configuration and information management |
| ISO 14744-1:2008 | Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| ISO 14744-4:2000 | Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| EN 60974-4:2016 | Arc welding equipment - Part 4: Periodic inspection and testing |
| EN 60974-8:2009 | Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| ISO 11611:2015 | Protective clothing for use in welding and allied processes |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| EN 16601-00-01:2015 | Space systems - Glossary of terms |
| ISO 9015-2:2016 | Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints |
| EN 60974-9:2010 | Arc welding equipment - Part 9: Installation and use |
| EN 60974-5:2013 | ARC WELDING EQUIPMENT - PART 5: WIRE FEEDERS (IEC 60974-5:2013) |
| EN 16602-10-09:2014 | Space product assurance - Nonconformance control system |
| EN 60974-3:2014 | Arc welding equipment - Part 3: Arc striking and stabilizing devices |
| SAE AMS 2644 : 2013 | INSPECTION MATERIAL, PENETRANT |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 22827-1:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly |
| ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism |
| EN 4179:2017 | Aerospace series - Qualification and approval of personnel for non-destructive testing |
| ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions |
| ISO 14744-6:2000 | Welding Acceptance inspection of electron beam welding machines Part 6: Measurement of stability of spot position |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| EN 60974-2:2013 | Arc welding equipment - Part 2: Liquid cooling systems |
| ISO 14744-2:2000 | Welding Acceptance inspection of electron beam welding machines Part 2: Measurement of accelerating voltage characteristics |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN 60974-10:2014/A1:2015 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015) |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| DIN 65153:1997-06 | AEROSPACE - ACCEPTANCE TESTING OF PLASMA ARC WELDING EQUIPMENT |
| ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure |
| ISO 9015-1:2001 | Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
| EN 16602-20:2014 | Space product assurance - Quality assurance |
| EN 60974-1:2012 | Arc welding equipment - Part 1: Welding power sources |
| ISO 22826:2005 | Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| ISO 3452-5:2008 | Non-destructive testing Penetrant testing Part 5: Penetrant testing at temperatures higher than 50 degrees C |
| ISO 6947:2011 | Welding and allied processes Welding positions |
| ISO 3452-4:1998 | Non-destructive testing Penetrant testing Part 4: Equipment |
| DIN 29595:2007-04 | Welding in aerospace - Fusion welded metallic components - Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.