14/30297213 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
Available format(s)
Hardcopy , PDF
Superseded date
31-05-2016
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety and environment
5 Jetties and marine facilities
6 Storage and retention systems
7 LNG pumps
8 Vaporisation of LNG
9 Pipe-work
10 Reception/send out of natural gas
11 Boil off recovery and treatment plants
12 Auxiliary circuits and buildings
13 Hazard management
14 Control and monitoring systems
15 Construction, commissioning and turnaround
16 Preservation and corrosion protection
17 Training for operations
18 Pre-operational marine training
Annex A (normative) Thermal radiation threshold values
Annex B (normative) Definitions of reference flow rates
Annex C (informative) Seismic classification
Annex D (normative) Specific requirements for LNG pumps
Annex E (normative) Specific requirements for LNG vaporisers
Annex F (normative) Criteria for the design of pipes
Annex G (informative) Description of the different types
of onshore LNG installations
Annex H (informative) Definition of different types of LNG tanks
Annex J (informative) Frequency ranges
Annex K (informative) Classes of consequence
Annex L (informative) - Levels of risk
Annex M (informative) - Typical process steps of liquefaction
Annex N (informative) - Odourant systems
Bibliography
BS EN 1473.
| Committee |
GSE/38
|
| DocumentType |
Draft
|
| Pages |
140
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN 1514-1:1997 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| EN 12560-6:2003 | Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
| EN 12162:2001+A1:2009 | Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
| CFR 10(PTS0-199) : JAN 87 | ENERGY - NUCLEAR REGULATORY COMMISSION |
| ISO 15664:2001 | Acoustics — Noise control design procedures for open plant |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| EN 12560-1:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 12560-3:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| EN 12560-2:2013 | Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
| ISO 5199:2002 | Technical specifications for centrifugal pumps — Class II |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 1474 : 1997 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 12483:1999 | Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests |
| EN 12065:1997 | Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires |
| EN 12560-4:2001 | Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
| EN 61779-4:2000 | Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| EN ISO 5199:2002 | Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 13645:2001 | Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| IEC TR 60079-16:1990 | Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| NFC 17 100 : 1997 | PROTECTION OF STRUCTURES AGAINST LIGHTNING - INSTALLATION OF LIGHTNING PROTECTIVE SYSTEM |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| IMCA SEL 017 : JAN 2007 | INTRODUCTION TO THE INTERNATIONAL SHIP & PORT FACILITY SECURITY CODE (THE ISPS CODE) |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 1460:1994 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992) |
| IEC 61779-4:1998 | Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit |
| IEC 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
| EN ISO 16903:2015 | Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 12308:1998 | Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 12241:2008 | Thermal insulation for building equipment and industrial installations Calculation rules |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| EN ISO 12241:2008 | Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) |
| EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN 61779-1 : 2000 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN ISO 9906:2012 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN ISO 28460:2010 | Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010) |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 12560-5:2001 | Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges |
| EN 12567:2000 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| ISO 23251:2006 | Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| IEC 61779-1:1998 | Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods |
| EN 14620-1:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General |
| API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| IEC 60079-13:2017 | Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 1998-5:2004 | Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
| EN 12066:1997 | Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.