14/30258493 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 14033-1 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING
Available format(s)
Hardcopy , PDF
Superseded date
30-06-2017
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Machine categorization
5 Rolling stock gauge
6 Frame
7 Bogie and running gear
8 Running safety
9 Brakes
10 Buffing and draw gear
11 Operation of track circuits, axle-counters, treadles for
level crossings, hot box detectors and unreleased brake
detectors
12 Running safety equipment
13 Warning equipment and lights
14 Drivers cabs and driving positions
15 Safety design features
16 Environmental protection
17 Design for recovery purposes
18 Machine marking
19 Machine data and maintenance book
Annex A (normative) - Application of technical requirements to
machines categories
Annex B (normative) - Special national conditions
Annex C (normative) - Machine diagram with gauge and critical points
Annex D (normative) - Free space at the end of the machine
Annex E (informative) - Steps, handrails and door handles
Annex F (normative) - Identification plate
Annex G (normative) - Technical documentation for operators
Annex H (normative) - Marking
Annex I (informative) - Technical documentation
Annex J (normative) - On board safety equipment
Annex K (normative) - Specification for verification of driver's brake
valve permitted for use on trains <= 150 m length
Annex L (informative) - Structure of European Standards for track
construction and maintenance machines
Annex M (informative) - Migration rule for this European Standard
Annex ZA (informative) - Relationship between this European Standard
and the Essential Requirements of EU Directive 2008/57/EC
Bibliography
BS EN 14033-1.
| Committee |
RAE/2
|
| DocumentType |
Draft
|
| Pages |
91
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 14033-1 : DRAFT 2014 | Identical |
| EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
| EN 15437-1:2009 | Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox |
| EN 15313:2016 | Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
| EN 15595:2009+A1:2011 | Railway applications - Braking - Wheel slide protection |
| UIC 527-1 : 3ED 2005 | COACHES, VANS AND WAGONS - DIMENSIONS OF BUFFER HEADS - TRACK LAYOUT ON S-CURVES |
| EN 15611:2008+A1:2010 | Railway applications - Braking - Relay valves |
| EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| UIC 520 : 7ED 2003 | WAGONS, COACHES AND VANS - DRAW GEAR - STANDARDISATION |
| EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
| EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
| EN 15624:2008+A1:2010 | Railway applications - Braking - Empty-loaded changeover devices |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| UIC 581 : 1983 AMD 1 | WAGONS - LIFTING - RERAILING |
| PREN 16452 : DRAFT 2012 | RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| UIC 515-1 : 2ED 2003 | PASSENGER ROLLING STOCK - TRAILER BOGIES - RUNNING GEAR - GENERAL PROVISIONS APPLICABLE TO THE COMPONENTS OF TRAILERS BOGIES |
| EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UIC 541-5 : 4ED 2005 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO) |
| EN 15220-1:2008+A1:2011 | Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| RSSB GM/RT2185 : ISSUE 2 AMD 1 2013 | TRAIN SAFETY SYSTEMS |
| EN 13715:2006+A1:2010 | Railway applications - Wheelsets and bogies - Wheels - Tread profile |
| EN 15877-1:2012 | Railway applications - Marking on railway vehicles - Part 1: Freight wagons |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| EN 14531-6:2009 | Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
| EN 15153-2:2013 | Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
| EN 14535-2:2011 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
| EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
| 2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| PREN 16404 : DRAFT 2015 | RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| EN 14535-1:2005+A1:2011 | Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
| EN 50238 : 2003 COR 2014 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS |
| UIC 512 : 1979 AMD 2 | ROLLING STOCK - CONDITIONS TO BE FULFILLED IN ORDER TO AVOID DIFFICULTIES IN THE OPERATION OF TRACK CIRCUITS AND TREADLES |
| EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 15152:2007 | Railway applications - Front windscreens for train cabs |
| ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 15179:2007 | Railway applications - Braking - Requirements for the brake system of coaches |
| EN 15227:2008+A1:2010 | Railway applications - Crashworthiness requirements for railway vehicle bodies |
| EN 14813-1:2006+A1:2010 | Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
| EN 16116-2:2013 | Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons |
| EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
| UIC 541-03 : 2ED 2015 | BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER |
| UIC 545 : 10ED 2014 | BRAKES - INSCRIPTIONS, MARKS AND SIGNS |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| EN 50121-3-1:2017 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
| EN 16116-1:2013 | Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, luggage vans and locomotives |
| EN 15528:2015 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 15153-1 : 2013 COR 2016 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 1: HEAD, MARKER AND TAIL LAMPS |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| EN 15625:2008+A1:2010 | Railway applications - Braking - Automatic variable load sensing devices |
| EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| EN 15806:2010 | Railway applications - Braking - Static brake testing |
| EN 12663-1:2010+A1:2014 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
| UIC 651 : 4ED 2002 | LAYOUT OF DRIVER'S CABS IN LOCOMOTIVES, RAILCARS, MULTIPLE-UNIT TRAINS AND DRIVING TRAILERS |
| UIC 640 : 3ED 2003 | MOTIVE POWER UNITS - INSCRIPTIONS, MARKS AND SIGNS |
| EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| PREN 15329 : DRAFT 2014 | RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCK HOLDER AND BRAKE SHOE KEY FOR RAIL VEHICLES |
| EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
| EN 12663-2:2010 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
| EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 15355:2008+A1:2010 | Railway applications - Braking - Distributor valves and distributor-isolating devices |
| UIC 544-1 : 6ED 2014 | BRAKES - BRAKING PERFORMANCE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.