12/30258581 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
Available format(s)
Hardcopy , PDF
Superseded date
31-12-2012
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Terms and definitions
3 Legislative background and the relationship
with standards
4 European directives and harmonized standards
5 UK legislation
6 Assessment of fire and explosion
hazards
7 Equipment for fire safety
Bibliography
BS 5908-2.
| Committee |
EXL/23
|
| DocumentType |
Draft
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| BS EN 62305-1:2011 | Protection against lightning General principles |
| BS 7899-1:1997 | Code of practice for assessment of hazard to life and health from fire General guidance |
| BS EN 54-23:2010 | Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices |
| BS EN 13616:2004 | Overfill prevention devices for static tanks for liquid petroleum fuels |
| BS EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres Protection by liquid immersion \'k\' |
| BS EN 15004-6:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant |
| BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS EN 15004-1:2008 | Fixed firefighting systems. Gas extinguishing systems Design, installation and maintenance |
| BS EN 12817:2010 | LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m<sup>3</sup> |
| PD CLC/TR 50404:2003 | Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| PD CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
| BS EN 15004-10:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for IG-541 extinguishant |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| BS DD8489-7(2011) : 2011 | FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 7: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR THE PROTECTION OF LOW HAZARD OCCUPANCIES |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| BS EN 1568-1:2008 | Fire extinguishing media. Foam concentrates Specification for medium expansion foam concentrates for surface application to water-immiscible liquids |
| BS EN 13776:2013 | LPG equipment and accessories. Filling and discharge procedures for LPG road tankers |
| BS 5266-1:2011 | Emergency lighting Code of practice for the emergency escape lighting of premises |
| BS EN 54-7:2001 | Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization |
| BS EN 54-1:2011 | Fire detection and fire alarm systems Introduction |
| BS EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| BS 7273-5:2008 | Code of practice for the operation of fire protection measures Electrical actuation of watermist systems (except pre-action systems) |
| BS EN 12882:2015 | Conveyor belts for general purpose use. Electrical and flammability safety requirements |
| BS EN 14797:2006 | Explosion venting devices |
| BS EN 15004-7:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for IG-01 extinguishant |
| BS EN 15004-2:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant |
| BS EN 15004-3:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant |
| BS EN 1256:2006 | Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes |
| BS EN 746-3 : 1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES |
| BS ISO 7745:2010 | Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use |
| BS EN 1834-1:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres |
| BS EN 16020:2011 | Explosion diverters |
| BS EN 60695-8-1:2017 | Fire hazard testing Heat release. General guidance |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| BS EN 15089:2009 | Explosion isolation systems |
| BS EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust Selection and installation |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| BS EN 620 : 2002 | |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| BS EN 15004-5:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant |
| BS EN 50281-2-1:1999 | Electrical apparatus for use in the presence of combustible dust. Test methods Methods of determining minimum ignition temperatures |
| BS EN 60079-15:2010 | Explosive atmospheres Equipment protection by type of protection \'n\' |
| BS EN 1991-4:2006 | Eurocode 1. Actions on structures Silos and tanks |
| BS EN 15004-9:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for IG-55 extinguishant |
| BS EN 60079-18 : 2015 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
| BS EN 15188:2007 | Determination of the spontaneous ignition behaviour of dust accumulations |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| BS EN 13821:2002 | Potentially explosive atmospheres. Explosion prevention and protection. Determination of minimum ignition energy of dust/air mixtures |
| BS EN 14071:2015 | LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment |
| BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
| BS EN 60079-10-1:2015 | Explosive atmospheres Classification of areas. Explosive gas atmospheres |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| BS EN 14034-1 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS |
| BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
| BS EN 14570:2014 | LPG equipment and accessories. Equipping of overground and underground LPG vessels |
| BS EN 1755:2015 | Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| BS EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations Stationary batteries |
| BS EN 54-3:2014 | Fire detection and fire alarm systems Fire alarm devices. Sounders |
| BS EN 60079-2:2014 | Explosive atmospheres Equipment protection by pressurized enclosure \'p\' |
| BS EN 54-5 : 2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS |
| BS EN 16009:2011 | Flameless explosion venting devices |
| BS EN 13463-6:2005 | Non-electrical equipment for potentially explosive atmospheres Protection by control of ignition source \'b\' |
| BS EN ISO 5172 : 2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
| BS EN 61241-4:2006 | Electrical apparatus for use in the presence of combustible dust Type of protection \'pD\' |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| BS EN 60079-10-2:2015 | Explosive atmospheres Classification of areas. Explosive dust atmospheres |
| BS EN 13480-3:2017 | Metallic industrial piping Design and calculation |
| BS EN 14034-2 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| BS EN 1568-2:2008 | Fire extinguishing media. Foam concentrates Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
| ISO 16104:2003 | Packaging — Transport packaging for dangerous goods — Test methods |
| BS 7899-2:1999 | Code of practice for assessment of hazard to life and health from fire Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires |
| BS EN 60079-5:2015 | Explosive atmospheres Equipment protection by powder filling \'q\' |
| BS EN ISO 13736:2008 | Determination of flash point. Abel closed-cup method |
| BS 5041-1:1987 | Fire hydrant systems equipment Specification for landing valves for wet risers |
| BS EN 3-7 : 2004 | PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 13480-5:2017 | Metallic industrial piping Inspection and testing |
| BS EN 54-12:2015 | Fire detection and fire alarm systems Smoke detectors. Line detectors using an optical beam |
| BS EN 60079-7 : 2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
| BS DD8489-5(2011) : 2011 | FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 5: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR THE PROTECTION OF COMBUSTION TURBINES AND MACHINERY SPACES WITH VOLUMES UP TO AND INCLUDING 80 M[3] |
| BS EN ISO 11611:2015 | Protective clothing for use in welding and allied processes |
| BS EN 12252:2014 | LPG equipment and accessories. Equipping of LPG road tankers |
| BS EN 14373:2005 | Explosion suppression systems |
| BS EN 3-8:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| BS EN 60695-1-10:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| BS EN ISO 7291 : 2010 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 30 MPA (300 BAR) |
| BS EN 746-1 : 1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
| BS EN 14034-3 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| DD CEN/TS 14816:2008 | Fixed firefighting systems. Water spray systems. Design and installation |
| BS ISO 22968:2010 | Forced draught oil burners |
| BS EN 50272-3:2002 | Safety requirements for secondary batteries and battery installations Traction batteries |
| BS EN 60695-1-11:2015 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment |
| BS EN 15794:2009 | Determination of explosion points of flammable liquids |
| BS EN 12845:2015 | Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance |
| BS EN 14756:2006 | Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
| BS EN ISO 14114:2014 | Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements |
| BS EN 50177 : 2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| BS EN 50172:2004 | Emergency escape lighting systems |
| BS EN 1568-4:2008 | Fire extinguishing media. Foam concentrates Specification for low expansion foam concentrates for surface application to water-miscible liquids |
| BS DD8489-1(2011) : 2011 | FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 1: CODE OF PRACTICE FOR DESIGN AND INSTALLATION |
| BS 7273-2:1992 | Code of practice for the operation of fire protection measures Mechanical actuation of gaseous total flooding and local application extinguishing systems |
| BS EN 13565-2:2009 | Fixed firefighting systems. Foam systems Design, construction and maintenance |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
| PD CEN/TR 15281:2006 | Guidance on inerting for the prevention of explosions |
| BS EN 416-2:2006 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Rational use of energy |
| BS EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements |
| BS EN 15004-8:2008 | Fixed firefighting systems. Gas extinguishing systems Physical properties and system design of gas extinguishing systems for IG-100 extinguishant |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| BS EN 14034-4 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| BS EN 60079-11:2012 | Explosive atmospheres Equipment protection by intrinsic safety \'i\' |
| BS EN 54-10:2002 | Fire detection and fire alarm systems Flame detectors. Point detectors |
| BS EN 60079-1:2014 | Explosive atmospheres Equipment protection by flameproof enclosures \'d\' |
| BS EN 14491:2012 | Dust explosion venting protective systems |
| BS EN 61241-11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety \'iD\' |
| DD IEC TS 60695-6-2 : DRAFT 2005 | FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS EN 618 : 2002 | |
| BS EN 61511-1:2004 | Functional safety. Safety instrumented systems for the process industry sector Framework, definitions, system, hardware and software requirements |
| BS EN 61340-4-1 : 2004 | ELECTROSTATICS - PART 4-1: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTRICAL RESISTANCE OF FLOOR COVERINGS AND INSTALLED FLOORS |
| BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| BS EN 1834-3:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
| DD IEC TS 60695-1-20 : DRAFT MAR 2008 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| BS EN 1839:2017 | Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours |
| BS EN 61511-2:2004 | Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1 |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
| BS EN 15967:2011 | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
| BS EN 12416-2:2001 | Fixed firefighting systems. Powder systems Design, construction and maintenance |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS PD8010-3(2009) : 2009 | PIPELINE SYSTEMS - PART 3: STEEL PIPELINES ON LAND - GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR ACCIDENT HAZARD PIPELINES CONTAINING FLAMMABLES - SUPPLEMENT TO PD 8010-1:2004 |
| BS EN 60598-2-22:2014 | Luminaires Particular requirements. Luminaires for emergency lighting |
| BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| BS EN 54-20:2006 | Fire detection and fire alarm systems Aspirating smoke detectors |
| BS EN 61340-4-4 : 2012 | ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) |
| BS EN 1593:1999 | Non-destructive testing. Leak testing. Bubble emission techniques |
| BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
| BS ISO 13344:2015 | Estimation of the lethal toxic potency of fire effluents |
| BS EN 60079-31:2014 | Explosive atmospheres Equipment dust ignition protection by enclosure \'t\' |
| BS EN 12864 : 2001 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN ISO 5171:2010 | Gas welding equipment. Pressure gauges used in welding, cutting and allied processes |
| BS EN 12416-1:2001 | Fixed firefighting systems. Powder systems Requirements and test methods for components |
| BS EN 61340-4-3:2002 | Electrostatics. Standard test methods for specific applications Footwear |
| PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
| BS EN 3-9:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers |
| BS EN 13922:2011 | Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels |
| BS EN 1568-3:2008 | Fire extinguishing media. Foam concentrates Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
| BS EN 14958 : 2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 54-11:2001 | Fire detection and fire alarm systems Manual call points |
| BS EN 13175:2014 | LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| ISO 16467:2003 | Packaging Transport packages for dangerous goods Test methods for IBCs |
| BS EN 13478 : 2002 | SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| BS DD8489-4(2011) : 2011 | FIXED FIRE PROTECTION SYSTEMS - INDUSTRIAL AND COMMERCIAL WATERMIST SYSTEMS - PART 4: TESTS AND REQUIREMENTS FOR WATERMIST SYSTEMS FOR LOCAL APPLICATIONS INVOLVING FLAMMABLE LIQUID FIRES |
| BS EN ISO 12100:2010 | Safety of machinery. General principles for design. Risk assessment and risk reduction |
| BS EN 14460:2006 | Explosion resistant equipment |
| ISO 3864-4:2011 | Graphical symbols Safety colours and safety signs Part 4: Colorimetric and photometric properties of safety sign materials |
| BS EN 1866-1:2007 | Mobile fire extinguishers Characteristics, performance and test methods |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.