11/30239977 DC : 0
Current
Current
The latest, up-to-date edition.
BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Content of a declaration
5 Specific declaration requirements
Annex A (informative) - Non-reinforced/clear cast
mouldings of unsaturated polyesters and
vinyl ester
Bibliography
BS EN 16245-2
| Committee |
PRI/21
|
| DocumentType |
Draft
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| PREN 16245-2 : DRAFT 2011 | Identical |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 13320:2009 | Particle size analysis Laser diffraction methods |
| EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
| ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
| ISO 3521:1997 | Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
| EN ISO 787-5:1995 | General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980) |
| ISO 14848:1998 | Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 15512:2016 | Plastics - Determination of water content (ISO 15512:2016) |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN ISO 3521:1999 | Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997) |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| EN ISO 584:1997 | Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982) |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 15512:2016 | Plastics Determination of water content |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 787-5:1980 | General methods of test for pigments and extenders — Part 5: Determination of oil absorption value |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 4629:1996 | Binders for paints and varnishes Determination of hydroxyl value Titrimetric method |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| ISO 2211:1973 | Liquid chemical products Measurement of colour in Hazen units (platinum-cobalt scale) |
| ISO 584:1982 | Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method) |
| EN ISO 4629:1998 | Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
| ISO 3105:1994 | Glass capillary kinematic viscometers — Specifications and operating instructions |
| PREN 16245-1 : DRAFT 2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| DIN 16945:1989-03 | REACTION RESINS - REACTANTS AND REACTION MOULDING MATERIALS - TEST METHODS |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.