10/30181171 DC : 0
Current
The latest, up-to-date edition.
BS EN 62586 - POWER QUALITY MONITORING DEVICES IN POWER SUPPLY SYSTEMS
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. NORMATIVE REFERENCES
3. DEFINITIONS
4. ENVIRONMENTAL CONDITIONS
5. RATINGS
6. DESIGN AND CONSTRUCTION
7. MARKING AND OPERATING INSTRUCTIONS
8. TESTS
9. ENVIRONMENTAL AND SAFETY TYPE TESTS
10. FUNCTIONAL TYPE TESTS
11. ROUTINE TESTS
12. CERTIFICATES
13. RE-CALIBRATION AND RE-VERIFICATION
ANNEX A (NORMATIVE) - FUNCTIONAL TESTING PROCEDURE FOR
PQI-A-XX
ANNEX B (NORMATIVE) - TESTING PROCEDURE FOR DIPS,
INTERRUPTIONS AND SWELLS
ANNEX C (NORMATIVE) - GAPLESS MEASUREMENTS OF VOLTAGE
AMPLITUDE ANDHARMONICS TEST
ANNEX D (INFORMATIVE) - GAPLESS MEASUREMENTS OF VOLTAGE
AMPLITUDE AND HARMONICS
ANNEX E (INFORMATIVE) - TESTING EQUIPMENT REQUIREMENTS
ANNEX F (INFORMATIVE) - EXAMPLE OF TEST REPORT
ANNEX G (INFORMATIVE) - INFLUENCE OF POWER SYSTEM INFLUENCE
QUANTITIES ON MEASURED PARAMETERS
ANNEX H (NORMATIVE) - INTRINSIC UNCERTAINTY, OPERATING
UNCERTAINTY, AND OVERALL SYSTEM UNCERTAINTY
ANNEX I (INFORMATIVE) - INFORMATION ABOUT ENVIRONMENT H AND G
DESCRIBED IN IEC 61000-6-5
ANNEX J (INFORMATIVE) - MIXED INFLUENCE QUANTITIES TESTING
BS EN 62586
| Committee |
PEL/85
|
| DocumentType |
Draft
|
| Pages |
92
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 61334-3-1:1998 | Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC TS 61000-6-5:2001 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments |
| IEC 60721-3-2:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| IEC 61000-4-7:2002+AMD1:2008 CSV | Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| IEC 60359:2001 | Electrical and electronic measurement equipment - Expression of performance |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60654-1:1993 | Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| IEC 60721-3-1:1997 | Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.