09/30196635 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS)
Hardcopy , PDF
31-07-2012
English
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
4 System
4.1 System description
4.2 Distribution system
4.3 Compatibility assessment before connection
4.4 System integration and management
4.5 Personnel safety
4.6 Design requirements
4.7 Electrical requirements
4.8 System study and calculations
4.9 Emergency shutdown including emergency
stop facilities
SECTION TWO - SHORE REQUIREMENTS
5 HV-shore supply system
5.1 Current Inrush
5.2 Voltages and frequencies
5.3 Quality of HV-shore power supply
6 Installation
6.1 General
6.2 Components and system requirements
6.3 Protection system
6.4 High-voltage (HV) interlocking concept
6.5 Shore-connection converter equipment
SECTION THREE - SHIP-TO-SHORE CONNECTION AND
INTERFACE EQUIPMENT
7 General
7.1 Ship-to-shore connection and interface
equipment
7.2 Plugs and socket-outlets
7.3 Interlocking of earthing switches
7.4 Ship-to-shore connection cable
7.5 Control and monitoring cable
7.6 Storage
SECTION FOUR - SHIP REQUIREMENTS
8 Installation
8.1 General
8.2 Ship-electrical-distribution-system
protection
8.3 Connection switchboard
8.4 Connection-switchboard instrumentation
and protection
8.5 On-board transformer
8.6 Receiving switchboard connection point
8.7 Ship power restoration
9 HVSC-System control and monitoring
9.1 General requirements
9.2 Load transfer via black out
9.3 Temporary parallel connection for load
transfer
SECTION FIVE - VERIFICATION AND TESTING
10 Initial tests
10.1 General
10.2 Initial tests of shore side installation
10.3 Initial tests of ship side installation
10.4 Tests at the first call at a shore supply
point
11 Periodic tests and maintenance
11.1 General
11.2 Tests at repeated calls of a shore
supply point
12 Documentation
12.1 General
12.2 System description
Annex A (Normative) - Plugs and socket-outlets
A.1 Test specimen
A.2 Type testing of plugs and socket-outlets
A.3 Coding and specification of plugs
and socket-outlets
A.4 Fibre optical plug/socket
Annex B (normative) - Ship-to-shore connection cable
B.1 Rated voltage
B.2 General design requirements
B.3 Tests on complete cables
Annex C (Normative) - Additional requirements for ships with
low voltage distribution systems
C.1 Scope
C.2 Normative references
C.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
C.4 System
SECTION TWO - SHORE REQUIREMENTS
C.5 HV-shore supply system
C.6 Installation
SECTION THREE - SHORE-TO-SHIP CONNECTION AND
INTERFACE EQUIPMENT
C.7 General
SECTION FOUR - SHIP REQUIREMENTS
C.8 Installation
C.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
C.10 Tests of completed installation
C.11 Tests after commissioning
C.12 Documentation
Annex D (Normative) - Additional requirements for
cruise ships
D.1 Scope
D.2 Normative references
D.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
D.4 System
SECTION TWO - SHORE REQUIREMENTS
D.5 HV-shore supply system
D.6 Installation
SECTION THREE - SHIP-TO-SHORE CONNECTION AND
INTERFACE EQUIPMENT
D.7 General
SECTION FOUR - SHIP REQUIREMENTS
D.8 Installation
D.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
D.10 Tests of completed installation
D.11 Tests after commissioning
D.12 Documentation
Annex E (Normative) - Additional requirements of
container vessels
E.1 Scope
E.2 Normative references
E.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
E.4 System
SECTION TWO - SHORE REQUIREMENTS
E.5 HV-shore supply system
E.6 Installation
SECTION THREE - SHORE-TO-SHIP CONNECTION
AND INTERFACE EQUIPMENT
E.7 General
SECTION FOUR - SHIP REQUIREMENTS
E.8 Installation
E.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
E.10 Initial tests
E.11 Periodic tests and maintenance
E.12 Documentation
Annex F (Normative) - Additional requirements of liquefied
natural gas carriers (LNG)
F.1 Scope
F.2 Normative references
F.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
F.4 System
SECTION TWO - SHORE REQUIREMENTS
F.5 HV-shore supply system
F.6 Installation
SECTION THREE - SHORE-TO-SHIP CONNECTION AND
INTERFACE EQUIPMENT
F.7 General
SECTION FOUR - SHIP REQUIREMENTS
F.8 Installation
F.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
F.10 Tests of completed installation
F.11 Tests after commissioning
F.12 Documentation
BS EN 60092-510
Committee |
JPEL/18
|
DocumentType |
Draft
|
Pages |
80
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
IEC TR 60721-4-6:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
IEC 60228:2004 | Conductors of insulated cables |
IEC 62271-200:2011 | High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
MIL-PRF-29504-5 Revision E:2016 | TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS, SIZE 16, REAR RELEASE, MIL-DTL-38999, SERIES 3 |
DIN VDE 0472-512 : 1985 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; RESISTANCE BETWEEN PROTECTIVE CONDUCTOR AND SEMI-CONDUCTIVE LAYER |
IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
IEC 60502-4:2010 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<sub>m</sub> = 1,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) |
IEC 60092-352:2005 | Electrical installations in ships - Part 352: Choice and installation of electrical cables |
IEC 60092-504:2016 | Electrical installations in ships - Part 504: Automation, control and instrumentation |
IEC 61363-1:1998 | Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c. |
IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
IEC 60092-376:2017 | Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
IEC 60092-201:1994 | Electrical installations in ships - Part 201: System design - General |
IEC 60092-351:2004 | Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60092-502:1999 | Electrical installations in ships - Part 502: Tankers - Special features |
IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
MIL-STD-1560 Revision C:2015 | INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599 AND SAE-AS29600 SERIES A - ELECTRICAL CIRCULAR CONNECTORS |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
IEC 60092-301:1980 | Electrical installations in ships - Part 301: Equipment - Generators and motors |
IEC 60811-1-4:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature |
IEC 60092-354:2014 | Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) |
IEC 60092-101:1994+AMD1:1995 CSV | Electrical installations in ships - Part 101: Definitions and general requirements |
IEC 60721-3-6:1987 | Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment |
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
IEC 60092-303:1980 | Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
IEC 60092-350:2014 | Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications |
IEC 60092-503:2007 | Electrical installations in ships - Part 503: Special features - AC supply systems with voltages in the range of above 1 kV up to and including 15 kV |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.