Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

09/30179897 DC : 0

Current

Current

The latest, up-to-date edition.

BS ISO 15192 - SOIL QUALITY - DETERMINATION OF CHROMIUM(6) IN SOLID MATERIAL BY ALKALINE DIGESTION AND ION CHROMATOGRAPHY WITH SPECTROPHOTOMETRIC DETECTION

Available format(s)

Hardcopy , PDF

Language(s)

English

$42.64
Including GST where applicable

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 Safety remarks
5 Principle
   5.1 Digestion
   5.2 Determination
   5.3 Interferences and sources of error
6 Apparatus
   6.1 Digestion equipment
   6.2 Filtration equipment,
   6.3 Membrane filters,
   6.4 Ion chromatographic system,
   6.5 Ion chromatographic column,
   6.6 Detection system
7 Reagents
   7.1 Water
   7.2 Sulfuric acid (H[2]SO[4]), concentrated,
        rho(H[2]SO[4]) sim 1,84 g/ml, w(H[2]SO[4]) sim 98%
   7.3 Sodium carbonate (Na[2]CO[3]), anhydrous,
        w(Na[2]CO[3]) > 99,9%
   7.4 1,5-Diphenylcarbazide ((C[6]H[5].NH.NH)[2]CO),
        w((C[6]H[5].NH.NH)[2]CO) > 98%
   7.5 Acetone (C[3]H[6]O)
   7.6 Methanol (CH[4]O)
   7.7 Potassium dichromate (K[2]C[r2]O[7]),
        w(K[2]Cr[2]O[7]) > 99,9%
   7.8 Sodium hydroxide (NaOH), w(NaOH) > 99%
   7.9 Magnesium chloride hexahydrate (MgCl[2].6H[2]O),
        w(MgCl[2].6H[2]O) > 99%
   7.10 Dipotassium hydrogenphosphate (K[2]HPO4),
        w(K[2]HPO[4]) > 99%
   7.11 Potassium dihydrogenphosphate (KH[2]PO[4]),
        w(KH[2]PO[4]) > 99%
   7.12 Lead chromate (PbCrO[4]), w(PbCrO[4]) > 99%
   7.13 Diphenylcarbazide reagent solution
   7.14 Eluent solution
   7.15 Alkaline digestion solution, 0,5 mol/l sodium
        hydroxide (NaOH)/0,28 mol/l sodium carbonate
        (Na[2]CO[3])
   7.16 Calibration solutions of Cr(VI)
   7.17 Phosphate buffer solution,
   7.18 Magnesium chloride solution
   7.19 Chromium chloride hexahydrate (CrCl[3].6H[2]O),
        w(CrCl[3].6H[2]O) > 96%
   7.20 Cr(III) spiking solution
8 Sample pretreatment
9 Alkaline digestion procedure
   9.1 General
   9.2 Preparation of test solutions using a hotplate
        or heating block
10 Analytical procedure
   10.1 General information
   10.2 Instrumental set-up
   10.3 Calibration
   10.4 Test solution measurement
   10.5 Quality Control
11 Calculation
12 Expression of results
13 Test report
Annex A (informative) - Alternative methods for direct
        determination of Cr(VI) in the alkaline
        digestion solution
Annex B (informative) - Ion chromatographic system
Annex C (informative) - Requirements for test portion preparation
Annex D (informative) - Background on methods for the
        determination of Cr(VI) in solid samples
   D.1 Summary of literature methods for Cr (VI)
        determinations in solids [6]
   D.2 Theoretical kinetic background for Cr(III)-Cr(VI)
        inter-conversions [6]
   D.3 Special needs for Cr(VI) determination in soil
        extracts [7]
   D.4 Determination of Cr(VI) in glass
   D.5 Determination of Cr(VI) in air particulate matter
Annex E (informative) - Validation
Bibliography

Committee
EH/4
DocumentType
Draft
Pages
31
PublisherName
British Standards Institution
Status
Current

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
CEN/TR 14589:2003 Characterization of waste - State of the art document - Chromium VI specification in solid matrices
ISO 11083:1994 Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide
EN ISO 15586:2003 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003)
ISO 11464:2006 Soil quality Pretreatment of samples for physico-chemical analysis
ISO 10304-3:1997 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
EN 14346:2006 Characterization of waste - Calculation of dry matter by determination of dry residue or water content
ISO 11885:2007 Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 16740:2005 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
ISO 15586:2003 Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
ISO 17294-2:2016 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes
EN ISO 17294-2:2016 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more