08/30195433 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 60519-1 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
28-02-2011
English
FOREWORD
1 General
1.1 Scope
1.2 Object
2 Normative references
3 Terms and definitions
4 Classification of electroheating equipment according
to frequency bands
4.1 General
4.2 Direct current equipment
4.3 Low-frequency equipment
4.4 Mains-frequency equipment
4.5 Medium-frequency equipment
4.6 High-frequency equipment
4.7 Microwave equipment
5 General requirements
5.1 Electroheating equipment
5.2 Electric equipment of electroheating installations
5.3 Electrostatic charges
5.4 Electromagnetic hazards
5.5 Ionizing radiation
5.6 Liquid cooling
6 Isolation and switching
6.1 General
6.2 Switching-off of special circuits
6.3 Switching at high voltage levels
7 Connection to the supply network and internal connections
7.1 General requirements
7.2 Fixed connection
7.3 Removable connection and flexible conductors
8 Protection against electric shock
8.1 General
8.2 Direct contact - special measures
8.3 Indirect contact - special measures
8.4 Recommendations for the user's operating instructions
9 Protection against overcurrent and overvoltage
10 Equipotential bonding
10.1 General
10.2 Protective bonding system
10.2.1 General
10.2.2 Protective conductors
10.2.3 Continuity of the protective bonding system
10.2.4 Exclusion of switching devices from the
protective bonding system
10.2.5 Parts that need not be connected to the
protective bonding system
10.2.6 Interruption of the protective bonding system
10.2.7 Protective conductor connecting points
10.2.8 Protective bonding in case the earth leakage
current exceeds 10 mA a.c. or d.c
10.3 Functional bonding
10.4 Prohibition of the use of earth as part of an
active circuit
11 Control circuits and control functions
11.1 Control circuits
11.2 Earthing of control circuits
11.3 Control functions
11.3.1 Start and stop functions
11.3.2 Operating modes
11.3.3 Suspension of safety functions and/or
protective measures
11.3.4 Emergency operations
11.3.5 Cableless control
11.4 Control functions in the event of failure
12 Protection against thermal influences
13 Protection against other risks
14 Marking, labelling and technical documentation
14.1 Marking
14.2 Warning marking
14.3 Labelling
14.4 Technical documentation
15 Instructions on commissioning, inspection, operation and
maintenance
15.1 General requirements
15.2 Information on commissioning and inspection
15.3 Operating instructions
15.4 Instructions for maintenance work
Bibliography
BS EN 60519-1
Committee |
PEL/27
|
DocumentType |
Draft
|
Pages |
32
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
IEC 60050-195:1998 | International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
IEC TS 61201:2007 | Use of conventional touch voltage limits - Application guide |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
EN 50191:2010 | ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT |
IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 62311:2007 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
IEC 60050-841:2004 | International Electrotechnical Vocabulary (IEV) - Part 841: Industrial electroheat |
IEC 60398:2015 | Installations for electroheating and electromagnetic processing - General performance test methods |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60050-521:2002 | International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits |
IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
IEC 60364-4-42:2010+AMD1:2014 CSV | Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60110-1:1998 | Power capacitors for induction heating installations - Part 1: General |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.