08/30192184 DC : 0
Current
The latest, up-to-date edition.
ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 Parameters
3.2 Performance of houses
4 Fire safety performance
4.1 User needs
4.2 Performance description
4.3 Principles for describing components of fire safety
performance
5 Parameters for the description of performance
5.1 General
5.2 Parameters for describing early warning
5.3 Parameters for describing fire suppression
5.4 Parameters for describing containment of fire spread
5.5 Parameters for describing adequate means of escape
5.6 Parameters for describing control of structural behaviour
5.7 Parameter for describing emission of smoke and toxic gases
6 Evaluation
6.1 General
Annex A (informative) Commentary
A Introduction
A1 Scope
A2 Normative references
A3 Definitions
A4 Fire safety performance
A4.1 User needs
A4.2 Performance description
A4.3 Principles for describing components of fire safety
performance
A5 Parameters for the description of performance
A5.1 Parameters for describing early warning
A5.2 Parameters for describing fire suppression
A5.3 Parameters for describing containment of fire spread
A5.4 Parameters for describing adequate means of escape
A5.5 Parameters for describing control of structural
behaviour
A5.6 Parameter for describing emission of smoke and toxic
gases
A6 Evaluation
Early warning
Suppression
Containment
Adequate means of escape
Control of structural behaviour
Control of emission of smoke and toxic gases
| Committee |
B/500
|
| DocumentType |
Draft
|
| Pages |
19
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| ISO/TR 834-3:2012 | Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
| ISO 6182-7:2004 | Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| ISO 7240-15:2014 | Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors |
| ISO 834-7:2000 | Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns |
| ISO 6182-4:1993 | Fire protection Automatic sprinkler systems Part 4: Requirements and test methods for quick-opening devices |
| ISO 5658-2:2006 | Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
| ISO 10093:1998 | Plastics Fire tests Standard ignition sources |
| ISO 9705:1993 | Fire tests Full-scale room test for surface products |
| ISO/TS 13571:2002 | Life-threatening components of fire Guidelines for the estimation of time available for escape using fire data |
| ISO/TR 1896:1991 | Products in fibre-reinforced cement Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| ISO 12468-1:2013 | External exposure of roofs to fire — Part 1: Test method |
| ISO 5657:1997 | Reaction to fire tests Ignitability of building products using a radiant heat source |
| ISO/TR 7240-14:2003 | Fire detection and alarm systems Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings |
| ISO 7165:2017 | Fire fighting — Portable fire extinguishers — Performance and construction |
| ISO 12472:2003 | Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals |
| ISO 6182-11:2003 | Fire protection Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers |
| ISO 834-8:2002 | Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements |
| ISO 5660-2:2002 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
| ISO 834-4:2000 | Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements |
| ISO 6182-1:2014 | Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
| ISO 7240-4:2003 | Fire detection and alarm systems Part 4: Power supply equipment |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO 5658-4:2001 | Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| ISO/TR 3814:1989 | Tests for measuring "reaction-to-fire" of building materials — Their development and application |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| ISO 7240-2:2003 | Fire detection and alarm systems Part 2: Control and indicating equipment |
| ISO 5923:2012 | Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide |
| ISO 12239:2010 | Smoke alarms using scattered light, transmitted light or ionization |
| ISO/TR 9705-2:2001 | Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance |
| ISO/TR 12470:1998 | Fire-resistance tests Guidance on the application and extension of results |
| ISO 6182-5:2012 | Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves |
| ISO/TR 10158:1991 | Principles and rationale underlying calculation methods in relation to fire resistance of structural elements |
| ISO 11925-3:1997 | Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
| ISO/TR 5660-3:2003 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
| ISO 6182-2:2012 | Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms |
| ISO 3009:2003 | Fire-resistance tests — Elements of building construction — Glazed elements |
| ISO 7240-5:2012 | Fire detection and alarm systems Part 5: Point-type heat detectors |
| ISO 834-9:2003 | Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements |
| ISO 834-5:2000 | Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements |
| ISO/TR 5658-1:1997 | Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| ISO 7240-1:2014 | Fire detection and alarm systems — Part 1: General and definitions |
| ISO 7240-7:2011 | Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization |
| ISO 834-6:2000 | Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams |
| ISO/TR 11925-1:1999 | Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
| ISO 6182-3:2012 | Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.