UNI EN ISO 14119 : 2013
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
11-21-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Operating principles and typical forms of
interlocking devices associated with guards
5 Requirements for the design and the installation of
interlocking devices with and without guard locking
6 Selection of an interlocking device
7 Design to minimize defeat possibilities of interlocking
devices
8 Control requirements
9 Information for use
Annex A (informative) - Type 1 interlocking device - Examples
Annex B (informative) - Type 2 interlocking device - Examples
Annex C (informative) - Type 3 interlocking device - Example
Annex D (informative) - Type 4 interlocking devices - Examples
Annex E (informative) - Examples of other interlocking devices
Annex F (informative) - Example of guard locking devices
Annex G (informative) - Application examples of interlocking
devices used within a safety function
Annex H (informative) - Motivation to defeat interlocking device
Annex I (informative) - Examples for maximum
static action forces
Bibliography
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard specifies principles for the design and selection — independent of the nature of the energy source — of interlocking devices associated with guards.
| Committee |
CT 42
|
| DevelopmentNote |
Supersedes UNI EN 1088. (11/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN ISO 14119:2013 | Identical |
| ISO 14119:2013 | Identical |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| EN 13906-1:2013 | Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| ISO/TR 23849:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| IEC TR 62061-1:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| DIN 33411-5:1999-11 | Physical strength of man - Part 5: Maximal isometric action forces, values |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO/TR 24119:2015 | Safety of machinery Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts |
| IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.