UNI EN ISO 13705 : 2013
Current
The latest, up-to-date edition.
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
02-07-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, abbreviated terms and symbols
4 General
5 Proposals
6 Design considerations
7 Tubes
8 Headers
9 Piping, terminals and manifolds
10 Tube supports
11 Refractories and insulation
12 Structures and appurtenances
13 Stacks, ducts and breeching
14 Burners and auxiliary equipment
15 Instrument and auxiliary connections
16 Shop fabrication and field erection
17 Inspection, examination and testing
Annex A (informative) - Equipment data sheets
Annex B (informative) - Purchaser's checklist
Annex C (informative) - Proposed shop-assembly conditions
Annex D (normative) - Stress curves for use in the design
of tube-support elements
Annex E (normative) - Centrifugal fans for fired-heater
systems
Annex F (normative) - Air preheat systems for fired
process heaters
Annex G (informative) - Measurement of efficiency of
fired process heaters
Annex H (informative) - Stack design
Annex I (informative) - Measurement of noise from
fired-process heaters
Bibliography
Describes requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air heaters (APHs), fans and burners for general refinery service.
Committee |
CT 700
|
DocumentType |
Standard
|
PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN ISO 13705 : 2013 | Identical |
EN ISO 13705:2012 | Identical |
I.S. EN ISO 13705:2012 | Identical |
NEN EN ISO 13705 : 2013 | Identical |
ISO 13705:2012 | Identical |
DIN EN ISO 13705:2013-04 | Identical |
SN EN ISO 13705:2013 | Identical |
BS EN ISO 13705:2012 | Identical |
NF EN ISO 13705 : 2013 | Identical |
NS EN ISO 13705 : 2012 | Identical |
ASTM C 553 : 2013 : REDLINE | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
ISO 15649:2001 | Petroleum and natural gas industries — Piping |
AMCA 803 : 2002(R2008) | INDUSTRIAL PROCESS/POWER GENERATION FANS: SITE PERFORMANCE TEST STANDARD |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
AWS D14.6/D14.6M : 2005 | SPECIFICATION FOR WELDING OF ROTATING ELEMENTS OF EQUIPMENT |
NACE 3 : 2007 | COMMERCIAL BLAST CLEANING |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
ASTM A 297/A297M : 2017 : REDLINE | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
API 535 : 2014 | BURNERS FOR FIRED HEATERS IN GENERAL REFINERY SERVICES |
ASTM D 5504 : 2012 : REDLINE | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
ISO 13704:2007 | Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries |
ASTM C 612 : 2014 : REDLINE | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
AMCA 210 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
ASTM C 27 : 1998 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
ASTM C 332 : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Insulating Concrete |
MSS SP 53 : 2012 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
SSPC-SP 6 : 2015 | COMMERCIAL BLAST CLEANING |
MSS SP 93 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
ASTM A 384 : 2002 | PRACTICE FOR SAFEGUARDING AGAINST WARPAGE AND DISTORTION DURING HOT-DIP GALVANIZING OF STEEL ASSEMBLIES |
ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
AMCA 802 : 2002(R2008) | INDUSTRIAL PROCESS/POWER GENERATION FANS - ESTABLISHING PERFORMANCE USING LABORATORY MODELS |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
AMCA 203 : 90(R2011) | FIELD PERFORMANCE MEASUREMENT OF FAN SYSTEMS |
API 536 : 2017 | POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES |
API 555 : 2013 | PROCESS ANALYZERS |
AMCA 801 : 2001(R2008) | INDUSTRIAL PROCESS/POWER GENERATION FANS - SPECIFICATIONS GUIDELINES |
AISC S326 : 1978 | SPECIFICATION FOR THE DESIGN, FABRICATION AND ERECTION OF STRUCTURAL STEEL FOR BUILDINGS (WITH COMMENTARY) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.