UNI EN 30-1-1 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
08-18-2022
01-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Constructional requirements
6 Performance requirements
7 Test methods
8 Marking and instructions
Annex A (informative) - National situations
Annex B (informative) - Guidelines for extension
to other categories
Annex C (normative) - Characteristics of the
pans required
Annex D (normative) - Surface temperature probe
Annex E (normative) - Use of symbols on the
appliance and packaging
Annex F (normative) - Symbol "Do not shut lid
when burner alight"
Annex G (normative) - Fragmentation requirement
for toughened soda-lime glass
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2009/142/EC
Bibliography
Describes the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases according to the categories, referred to in the text as "appliances".
| DevelopmentNote |
Supersedes UNI HD 1003, UNI 7134, UNI 7135. Together with UNI EN 30-2-1, supersedes UNI 7136. (04/2001)
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 30-1-1 : 2013 | Identical |
| NEN EN 30-1-1 : 2008 + A3 2013 | Identical |
| SN EN 30-1-1+A3:2013 | Identical |
| DIN EN 30-1-1:2013-06 | Identical |
| UNE-EN 30-1-1:2009 | Identical |
| I.S. EN 30-1-1:2008 | Identical |
| EN 30-1-1:2008+A3:2013 | Identical |
| NS EN 30-1-1 : 2008 + A3 2013 | Identical |
| NBN EN 30-1-1 : 2009 + A3 2013 | Identical |
| NF EN 30-1-1 : 2008 + A3 2013 | Identical |
| BS EN 30-1-1 : 2008 | Identical |
| UNI 11554 : 2014 | NON-REGULATED PROFESSIONS - GAS OPERATORS WORKING ON GAS PLANTS SUPPLIED BY DISTRIBUTION NETWORK - KNOWLEDGE, SKILL AND COMPETENCE REQUIREMENTS |
| IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60335-2-6:2014 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN 751-2:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| ISO 5732:1978 | Kitchen equipment — Sizes of openings for built-in appliances |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
| EN 126:2012 | Multifunctional controls for gas burning appliances |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
| IEC 60730-2-1:1989 | Automatic electrical controls for household and similar use. Part 2: Particular requirements for electrical controls for electrical household appliances |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| EN 60730-2-1 : 97 AMD 11 2005 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES |
| EN 751-1:1996 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 1106:2010 | Manually operated taps for gas burning appliances |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 257:2010 | Mechanical thermostats for gas-burning appliances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.