UNI EN 12665 : 2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
Superseded date
08-01-2022
Superseded by
Published date
01-01-2011
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Framework for the specification of lighting requirements
Annex A (informative) - Additional explanation of defined
terms
Annex B (informative) - Index of terms
Annex C (informative) - A deviation
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2008/57/EC
Bibliography
Describes basic terms and definitions for use in all lighting applications. Also describes a framework for the specification of lighting requirements, giving details of aspects which have to be considered when setting those requirements.
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 12665:2012 | Identical |
| NS EN 12665 : 2011 | Identical |
| SN EN 12665 : 2011 | Identical |
| I.S. EN 12665:2011 | Identical |
| BS EN 12665:2011 | Identical |
| NEN EN 12665 : 2012 | Identical |
| NF EN 12665 : 2011 | Identical |
| NBN EN 12665 : 2011 | Identical |
| DIN EN 12665:2016-09 (Draft) | Identical |
| ONORM EN 12665 : 2011 | Identical |
| UNI 11431 : 2011 | LIGHT AND LIGHTING - USE OF LUMINOUS FLUX CONTROLLERS IN ROAD LIGHTING |
| CEI 64-19 : 2014 | EXTERNAL LIGTHING INSTALLATION - INSTALLATION CRITERIA |
| UNI 11095 : 2011 | LIGHT AND LIGHTING - ROAD TUNNEL LIGHTING |
| UNI 11356 : 2010 | LIGHT AND LIGHTING - PROTOCOL FOR THE MEASUREMENT OF LED LUMINAIRES PHOTOMETRIC DATA |
| EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| EN 13201-2:2015 | Road lighting - Part 2: Performance requirements |
| IEC 61347-2-3:2011+AMD1:2016 CSV | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
| IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 61047:2004 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| EN 61048:2006/A1:2016 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015) |
| IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
| EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
| IEC 61048:2006+AMD1:2015 CSV | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| EN 60969:1993/A2:2000 | SELF-BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES - PERFORMANCE REQUIREMENTS |
| EN 13201-4:2015 | Road lighting - Part 4: Methods of measuring lighting performance |
| EN 61199:2011/A2:2015 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014) |
| EN 60432-2:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| EN 60929:2011/A1:2016 | AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| IEC 60929:2011+AMD1:2015 CSV | AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements |
| IEC 61047:2004 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| EN 60923:2005/A1:2006 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS |
| EN 61347-2-3:2011/A1:2017 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016) |
| EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
| IEC 61199:2011+AMD1:2012+AMD2:2014 CSV | Single-capped fluorescent lamps - Safety specifications |
| IEC 61167:2015 | Metal halide lamps - Performance specification |
| IEC 60925:1989+AMD1:1996+AMD2:2001 CSV | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
| IEC 61049:1991 | Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements |
| EN 61049:1993 | Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements |
| EN 60921:2004/A1:2006 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| EN 60357:2003/A11:2016 | TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS |
| IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60901:1996+AMD1:1997+AMD2:2000 CSV | Single-capped fluorescent lamps - Performance specifications |
| IEC 60969:2016 | Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements |
| EN 60064:1995/A5:2009 | TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES - PERFORMANCE REQUIREMENTS |
| EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 61347-2-7:2011+AMD1:2017 CSV | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| CEN/TR 13201-1:2014 | Road lighting - Part 1: Guidelines on selection of lighting classes |
| EN 12193:2007 | Light and lighting - Sports lighting |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| IEC 61347-2-2:2011 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| IEC 60927:2007+AMD1:2013 CSV | Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
| EN 60155:1995/A2:2007 | GLOW-STARTERS FOR FLUORESCENT LAMPS |
| EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
| IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
| IEC 60155:1993 | Glow-starters for fluorescent lamps |
| EN 60432-1:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011) |
| IEC 60923:2005+AMD1:2006 CSV | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
| IEC 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| IEC 61347-2-8:2000+AMD1:2006 CSV | Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
| EN 61195:1999/A2:2015 | DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014) |
| EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| EN 60925:1991/A2:2001 | SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| IEC 61195:1999+AMD1:2012+AMD2:2014 CSV | Double-capped fluorescent lamps - Safety specifications |
| EN 13201-3:2015 | Road lighting - Part 3: Calculation of performance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.