UNE-EN 13524:2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Highway maintenance machines - Safety requirements
Hardcopy , PDF
12-29-2009
Spanish, Castilian
11-21-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 Combination of carrier vehicle and machine for highway
maintenance
5.2 Controls
5.3 Access and walkways
5.4 Precautions against hazards caused by moving parts
5.5 Hot surfaces
5.6 Attachment fittings
5.7 Safety mechanisms for changing mechanisms
5.8 Lifting devices
5.9 Safety mechanism for transportation
5.10 Support equipment for machines and components
5.11 Disconnectable power and signal-transmitting systems
5.12 Requirements for fluid power systems
5.13 Special protection against parts being ejected
5.14 Controls for machines using revolving/oscillating tools
5.15 Protective covering of moving parts
5.16 Special protection measures to prevent unintentional contact
with revolving tools in the operating area of mowing and
mulching machines
6 Information for use
6.1 Operator's manual
6.2 Spare parts list
7 Marking
8 Verification
Annex A (informative) Attachment plate for a truck
Annex B (normative) Stipulations on the design and testing of mowing
and mulching machines
Annex ZA (informative) Relationship of this document with EC Directives
Bibliography
Applies to machines used for highway maintenance which are attached to or mounted on carrier vehicles.
| Committee |
CTN 115
|
| DevelopmentNote |
2003 Edition Re-Issued in June 2014 & incorporates AMD 2 2014. (06/2014)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 13524 : 2014 | Identical |
| BS EN 13524 : 2003 | Identical |
| EN 13524:2003+A1:2009 | Identical |
| UNI EN 13524 : 2014 | Identical |
| DIN EN 13524:2014-07 | Identical |
| I.S. EN 13524:2003 | Identical |
| SN EN 13524 : 2003 + A2 2014 | Identical |
| NEN EN 13524 : 2003 + A2 2014 | Identical |
| NF EN 13524 : 2003 + A2 2014 | Identical |
| NS EN 13524 : 2003 + A2 2014 | Identical |
| NBN EN 13524 : 2003 + A2 2014 | Identical |
| EN 13524:2003+A2:2014 | Identical |
| DIN EN 13524:2003-10 | Identical |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| EN 1501-2:2005+A1:2009 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| EN ISO 15667:2000 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| ISO 730:2009 | Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 1501-4:2007 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
| ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 11001-2:1993 | Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 2: A-frame coupler |
| ISO 2758:2014 | Paper Determination of bursting strength |
| EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 789-1:1990 | Agricultural tractors Test procedures Part 1: Power tests for power take-off |
| EN 1501-1:2011+A1:2015 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| ISO 11001-4:1994 | Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 4: Bar coupler |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| ISO 6405-1:2017 | Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols |
| ISO 536:2012 | Paper and board Determination of grammage |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 11001-3:2009 | Agricultural wheeled tractors and implements Three-point hitch couplers Part 3: Link coupler |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN 13019:2001+A1:2008 | Machines for road surface cleaning - Safety requirements |
| ISO 11001-1:2016 | Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 6750:2005 | Earth-moving machinery Operator's manual Content and format |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.