SAE AMS 03-2 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CLEANING AND PREPARATION OF METAL SURFACES
Hardcopy , PDF
12-20-2019
English
01-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. WARNING
3. NORMATIVE REFERENCES
4. DEFINITIONS
5. INFORMATION TO BE SUPPLIED TO THE PROCESSOR
6. PROCESS CONTROL
7. GENERAL REQUIREMENTS
8. STANDARD CLEANING METHODS
9. NOTES
ANNEX A - STEELS, NON-CORROSION RESISTING, CAST
IRONS AND PURE IRONS
ANNEX B - STEELS, CORROSION RESISTING
ANNEX C - ALUMINUM AND ALUMINUM ALLOYS
ANNEX D - COPPER AND COPPER ALLOYS
ANNEX E - NICKEL ALLOYS
ANNEX F - TITANIUM AND TITANIUM ALLOYS
ANNEX G - MAGNESIUM ALLOYS
ANNEX H - ZINC BASED ALLOYS
ANNEX I - TUNGSTEN ALLOYS
ANNEX J - CLEANING AND PREPARATION METHODS
APPENDIX W - MAINTENANCE OF ORGANIC SOLVENT AND
VAPOR DEGREASING BATHS
APPENDIX X - THE CONTROL OF ACIDITY IN VAPOR
DEGREASING PLANT
APPENDIX Y - METHOD FOR THE DETERMINATION OF THE
RATE OF ATTACK ON MILD STEEL
APPENDIX Z - PRETREATMENT SOLUTION FOR ALUMINUM
Provides processes for the cleaning of metal surfaces to remove any extraneous or undesirable material or deposits at any stage of manufacture, storage or service and for the preparation of these surfaces for further treatment.
| Committee |
AMS B
|
| DevelopmentNote |
Supersedes DEFSTAN 03-2/6(2011). (05/2015)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 03-032(PT1)/5(2017) : 2017 | PRETREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 14644-13:2017 | Cleanrooms and associated controlled environments Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications |
| SAE AMS 03-11A :2015(S2017) | PHOSPHATE TREATMENT OF IRON AND STEEL |
| SAE AMS 03-25 : 2017 | SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS |
| DIN EN ISO 14644-13:2016-03 (Draft) | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 13: CLEANING OF SURFACES TO ACHIEVE DEFINED LEVELS OF CLEANLINESS IN TERMS OF PARTICLE AND CHEMICAL CLASSIFICATIONS (ISO 14644-13:2017) |
| DEFSTAN 81-055/7(2017) : 2017 | PACKAGING OF MECHANICAL COMPONENTS & ITEMS |
| DEFSTAN 03-032(PT6)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| DEFSTAN 07-085(PT1)/4(2017) : 2017 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| SAE AMS 03-040 : 2017 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| EN ISO 14644-13:2017 | Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017) |
| DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 03-032(PT5)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| SAE AMS 03-9 : 2017 | ELECTRO-DEPOSITION OF SILVER |
| SAE AMS03-4A : 2015(S2017) | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
| SAE AMS 03-18 : 2018 | CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS 03-19A : 2017 | ELECTRO-DEPOSITION OF CADMIUM |
| DEFSTAN 03-032(PT3)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 03-032(PT2)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 2: SYSTEMS FOR FERROUS ARMOUR |
| SAE AMS 03-20A : 2017 | ELECTRO-DEPOSITION OF ZINC |
| SAE AMS 03-17 : 2018 | ELECTRO-DEPOSITION OF GOLD |
| I.S. EN ISO 14644-13:2017 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 13: CLEANING OF SURFACES TO ACHIEVE DEFINED LEVELS OF CLEANLINESS IN TERMS OF PARTICLE AND CHEMICAL CLASSIFICATIONS (ISO 14644-13:2017) |
| SAE AMS 03-14 : 2018 | ELECTRODEPOSITION OF CHROMIUM FOR ENGINEERING PURPOSES |
| SAE AMS 03-27 : S2017 | ELECTRO-DEPOSITION OF NICKEL FOR ENGINEERING PURPOSES |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| ISO 14644-13:2017 | Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications |
| BS 7079:2009 | General introduction to standards for preparation of steel substrates before application of paints and related products |
| DEFSTAN 03-11/5(2008) : 2008 | PHOSPHATE TREATMENT OF IRON AND STEEL |
| BS 4921:1988 | Specification for sherardized coatings on iron or steel |
| DEFSTAN 03-27/3(2005) : 2005 | ELECTRO-DEPOSITION OF NICKEL FOR ENGINEERING PURPOSES |
| BS 2569(1955) : LATEST | SPRAYED METAL COATINGS |
| BS EN ISO 3696:1995 | Water for analytical laboratory use. Specification and test methods |
| BS EN 10140:2006 | Cold rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN ISO 6507-1:2005 | Metallic materials. Vickers hardness test Test method |
| DEFSTAN 03-4/6(2011) : 2011 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
| BS EN ISO 4788:2005 | Laboratory glassware. Graduated measuring cylinders |
| DEFSTAN 03-24/5(2008) : 2008 | CHROMIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| DEFSTAN 03-3/5(2011) : 2011 | PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS |
| BS EN ISO 11124-3:1997 | Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives High-carbon cast-steel shot and grit |
| DEFSTAN 68-189/2(2004) : 2004 | SOLVENT FOR GREASE, EMULSIFIABLE |
| BS 5599:1993 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes |
| SAE AMS 03-25 : 2015 | SULFURIC ACID ANODIZING OF ALUMINUM AND ALUMINUM ALLOYS |
| DEFSTAN 68-188/2(2001) : 2001 | EMULSIFIER FOR SOLVENT CLEANER |
| SAE AMS 03-27 : 2015 | ELECTRO-DEPOSITION OF NICKEL FOR ENGINEERING PURPOSES |
| SAE AMS 03-11 : 2015 | PHOSPHATE TREATMENT OF IRON AND STEEL |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| DEFSTAN 03-18/5(2012) : 2012 | CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| DEFSTAN 08-39/4(2011) : 2011 | CUTTING, WELDING AND CORROSION PROTECTION OF ALUMINUM ALLOY MILITARY EQUIPMENT |
| DEFSTAN 03-25/5(2008) : 2008 | SULFURIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS 4130:1984 | Specification for sodium hydroxide (technical grades) |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| SAE AMS03-4A : 2015(S2017) | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
| BS EN 2516:1997 | Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| SAE AMS 03-18 : 2015 | CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINUM AND ALUMINUM ALLOYS |
| BS 245:1976 | Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes |
| BS 2X 32:1998 | Specification for pre-treatment etch primer for aerospace purposes |
| BS 6338:1982 | Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
| BS EN ISO 11126-7:2001 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives Specification for fused aluminium oxide |
| DEFSTAN 68-160/3(2006) : 2006 | DEGREASING COMPOUND, TYPES A AND C |
| DTD 911C : MAR 69 | PROTECTION OF MAGNESIUM-RICH ALLOYS AGAINST CORROSION |
| DEFSTAN 80-15/2(1990) : 1990 | PAINT, PRE-TREATMENT PRIMER (ETCHING PRIMER) - TYPES: BRUSHING (BASE AND ACID COMPONENT), SPRAYING (BASE AND ACID COMPONENT) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.