PREN 303-5 : DRAFT 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
Published date
01-12-2013
Publisher
Superseded date
06-01-2012
Superseded by
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Requirements
5 Test
6 Test report and other documents
7 Designation
8 Technical documentation, supplied with boiler
Annex A (informative) - Manual measurement of particles in
the gas flow, gravimetric determination of particle
load with filter systems
Annex B (informative) - Vocabulary
Annex C (informative) - Design criteria for solutions to
prevent back burning
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2006/42/EC Machinery Directive
Annex ZB (informative) - A-deviations
Pertains to heating boilers up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer.
| Committee |
TC 57
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 10/30228886 DC : 0 | Identical |
| 18/30345746 DC : DRAFT APR 2018 | Identical |
| DIN EN 14961-6:2012-04 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 11/30244599 DC : 0 | BS EN 14961-6 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON WOODY PELLETS FOR NON-INDUSTRIAL USE |
| BS EN 14961-6:2012 | Solid biofuels. Fuel specifications and classes Non-woody pellets for non-industrial use |
| I.S. EN 14961-6:2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| EN 14961-6:2012 | Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use |
| BS EN 50165:1997 | Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements |
| UNE-EN 14961-6:2012 | Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use |
| EN 1551:2000 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| EN 15270:2007 | Pellet burners for small heating boilers - Definitions, requirements, testing, marking |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 2553:2013 | Welding and allied processes — Symbolic representation on drawings — Welded joints |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| EN ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| ISO 13919-1:1996 | Welding — Electron and laser-beam welded joints — Guidance on quality levels for imperfections — Part 1: Steel |
| ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 304:2017 | Heating boilers - Test code for heating boilers for atomizing oil burners |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| ISO 7005-3:1988 | Metallic flanges — Part 3: Copper alloy and composite flanges |
| EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| PREN 14961-2 : DRAFT 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| CEN/TS 14778-1:2005 | Solid biofuels - Sampling - Part 1: Methods for sampling |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 13526:2001 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method |
| EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN ISO 13919-1:1996 | Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| EN 13384-1:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
| ISO 12039:2001 | Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems |
| EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| ISO 857-1:1998 | Welding and allied processes — Vocabulary — Part 1: Metal welding processes |
| EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| PREN 14961-3 : DRAFT 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| EN 60730-2-5:2015 | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| ISO 228-2:1987 | Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification by means of limit gauges |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| EN ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| ISO 857-2:2005 | Welding and allied processes — Vocabulary — Part 2: Soldering and brazing processes and related terms |
| ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 4: Laser beam welding |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation |
| ISO 13919-2:2001 | Welding — Electron and laser beam welded joints — Guidance on quality levels for imperfections — Part 2: Aluminium and its weldable alloys |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.