PD ISO/TR 18569:2004
Current
Current
The latest, up-to-date edition.
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
06-22-2004
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Classification of machinery safety standards
3 Basic concepts, principles and requirements
4 Safety distances and hand/arm speed
4.1 General
4.2 Safety distances
4.3 Hand/arm speed
4.4 Basic formula
5 Guards and interlocking devices
5.1 General
5.2 Guards
5.3 Interlocking devices
6 Safety functions
6.1 Emergency stop
6.2 Energy isolation and prevention of unexpected
start-up
6.3 Mode selection, reduced speed and monitoring
7 Protective devices
7.1 Enabling and two-hand control devices
7.2 Hold-to-run, trip, mechanical restraint,
limiting and limited movement devices
7.3 Electro-sensitive protective equipment (ESPE)
7.4 Pressure-sensitive protective devices (PSPDs)
8 Electrical equipment
9 Fluid power systems and components
10 Marking, warning devices, signs and symbols,
actuating principles
11 Documentation
11.1 Information for use
11.2 Technical documentation
12 Ergonomics
12.1 Terminology, general principles
12.2 Human body dimensions
12.3 Touchable surfaces
12.4 Displays, control actuators
12.5 Visual danger signals
12.6 Auditory and visual signals, speech communication
12.7 Human physical performance
12.8 Application of ergonomics standards
13 Hazardous substances and airborne emissions
13.1 Hazardous substances
13.2 Airborne emissions
14 Risks arising from radiation
15 Permanent means of access
16 Fire and explosion
17 Acoustics
17.1 Objectives
17.2 Relevant standards
18 Mechanical vibration
18.1 General considerations
18.2 Types of vibration
19 Electromagnetic compatibility
Annex A Relationship of standards to various European
Directives related to machinery
Annex B Ergonomic considerations
B.1 Referenced standards
B.2 Basic ergonomic design principles
B.3 Basic considerations for man-machine interface
when designing and constructing a machine
Annex C Outline of electrical requirements
Annex D Outline of standards related to electrical
documentation
D.1 IEC 61082, Preparation of documents used in
electrotechnology
D.2 IEC 61346-1, Structuring principles and
reference designations - Part 1: Basic rules
Bibliography
Provides assistance to the designer or manufacturer of machinery and related equipment on the contents and how to apply the relevant Type A and Type B safety of machinery standards.
| Committee |
MCE/3
|
| DocumentType |
Standard
|
| Pages |
88
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report provides assistance to the designer or manufacturer of machinery and related equipment on the contents and how to apply the relevant Type A and Type B safety of machinery standards.
ISO/TR 18569 provides an overview which gives a general outline of the basic steps which can assist the manufacturer to declare conformity with the EU Machinery Directive and related standards or apply supporting standards in the case when specific Type C standards do not exist. It provides an outline of the various standards associated with machinery safety.
NOTE This Technical Report does not address Type C standards.
| Standards | Relationship |
| ISO/TR 18569:2004 | Identical |
| ISO 7574-2:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines |
| EN 50081-1:1992 | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| ISO 3511-1:1977 | Process measurement control functions and instrumentation — Symbolic representation — Part 1: Basic requirements |
| ISO 10075-2:1996 | Ergonomic principles related to mental workload — Part 2: Design principles |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| ISO 9241-11:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 1746:1998 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| ISO 3511-3:1984 | Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 11226:2000 | Ergonomics — Evaluation of static working postures |
| ISO 9241-5:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements |
| ISO 9241-17:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 17: Form filling dialogues |
| ISO 12894:2001 | Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| EN 12198-2:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
| ISO 9241-10:1996 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 10: Dialogue principles |
| ISO 9241-9:2000 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 9: Requirements for non-keyboard input devices |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| EN 1093-1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| ISO 7917:1987 | Acoustics Measurement at the operator's position of airborne noise emitted by brush saws |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| ISO 9921:2003 | Ergonomics Assessment of speech communication |
| ISO 7182:1984 | Acoustics Measurement at the operator's position of airborne noise emitted by chain saws |
| ANSI B11 TR1 : 2004 | ERGONOMIC GUIDELINES FOR THE DESIGN, INSTALLATION AND USE OF MACHINE TOOLS |
| IEC 60416:1988 | General principles for the formulation of graphical symbols |
| IEC 60364-4-473:1977+AMD1:1998 CSV | Electrical installations of buildings - Part 4: Protection for safety - Chapter 47: Application of protective measures for safety - Section 473: Measures of protection against overcurrent |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO 389-4:1994 | Acoustics Reference zero for the calibration of audiometric equipment Part 4: Reference levels for narrow-band masking noise |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 3098-4:2000 | Technical product documentation — Lettering — Part 4: Diacritical and particular marks for the Latin alphabet |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| ISO 8662-9:1996 | Hand-held portable power tools Measurement of vibrations at the handle Part 9: Rammers |
| ISO 7574-4:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| IEC 61131-1:2003 | Programmable controllers - Part 1: General information |
| ISO 8662-12:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
| ISO 7250:1996 | Basic human body measurements for technological design |
| EN 1093-9:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| ISO 8662-10:1998 | Hand-held portable power tools Measurement of vibrations at the handle Part 10: Nibblers and shears |
| ISO 7243:2017 | Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| ISO 9241-12:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information |
| IEC 61082-4:1996 | Preparation of documents used in electrotechnology - Part 4: Location and installation documents |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| ISO 3098-5:1997 | Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks |
| ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
| EN 1093-3:2006+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| EN 1033 : 1995 | HAND-ARM VIBRATION - LABORATORY MEASUREMENT OF VIBRATION AT THE GRIP SURFACE OF HAND-GUIDED MACHINERY - GENERAL |
| IEC 61310-3:2007 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| ISO 9241-16:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| ISO 8662-6:1994 | Hand-held portable power tools Measurement of vibrations at the handle Part 6: Impact drills |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 9241-7:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 7: Requirements for display with reflections |
| ISO 4196:1984 | Graphical symbols — Use of arrows |
| ISO 3774:1988 | Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions |
| ISO 8662-4:1994 | Hand-held portable power tools Measurement of vibrations at the handle Part 4: Grinders |
| ISO 7574-1:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 31-11:1992 | Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology |
| IEC 60947-7-1:2009 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| ISO 1680:2013 | Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines |
| IEC 61082-1:2014 RLV | Preparation of documents used in electrotechnology - Part 1: Rules |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| IEC 60757:1983 | Code for designation of colours |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| IEC 60072-1:1991 | Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| ISO 13406-1:1999 | Ergonomic requirements for work with visual displays based on flat panels Part 1: Introduction |
| IEC 61082-3:1993 | Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists |
| ISO 9241-14:1997 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 14: Menu dialogues |
| ISO 8662-2:1992 | Hand-held portable power tools Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers |
| ISO 216:2007 | Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction |
| ISO 406:1987 | Technical drawings Tolerancing of linear and angular dimensions |
| ISO 11205:2003 | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| IEC 60364-4-46:1981 | Electrical installations of buildings. Part 4: Protection for safety. Chapter 46: Isolation and switching |
| ISO 13853:1998 | Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs |
| IEC 61346-1:1996 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
| EN 1093-4:1996+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
| ISO 9241-15:1997 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 15: Command dialogues |
| ISO 11690-2:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures |
| ISO 5455:1979 | Technical drawings — Scales |
| ISO 14159:2002 | Safety of machinery — Hygiene requirements for the design of machinery |
| ISO 8662-13:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 13: Die grinders |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| ISO 8662-5:1992 | Hand-held portable power tools — Measurement of vibrations at the handle — Part 5: Pavement breakers and hammers for construction work |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN 50081-2:1993 | Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment |
| ISO 11429:1996 | Ergonomics — System of auditory and visual danger and information signals |
| ISO 14915-1:2002 | Software ergonomics for multimedia user interfaces Part 1: Design principles and framework |
| ISO 15534-3:2000 | Ergonomic design for the safety of machinery — Part 3: Anthropometric data |
| ISO 10075-3:2004 | Ergonomic principles related to mental workload — Part 3: Principles and requirements concerning methods for measuring and assessing mental workload |
| ISO 8662-11:1999 | Hand-held portable power tools Measurement of vibrations at the handle Part 11: Fastener driving tools |
| ISO 5135:1997 | Acoustics Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| ISO 14915-3:2002 | Software ergonomics for multimedia user interfaces Part 3: Media selection and combination |
| ISO 8662-14:1996 | Hand-held portable power tools Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers |
| IEC 60027-3:2002 | Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 1093-7:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
| ISO/TR 11079:1993 | Evaluation of cold environments — Determination of required clothing insulation (IREQ) |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| ISO 5457:1999 | Technical product documentation Sizes and layout of drawing sheets |
| ISO 3511-2:1984 | Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO/TR 7849:1987 | Acoustics Estimation of airborne noise emitted by machinery using vibration measurement |
| ISO 31-2:1992 | Quantities and units Part 2: Periodic and related phenomena |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 14121:1999 | Safety of machinery Principles of risk assessment |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| IEC TR 61131-8:2003 | Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages |
| ISO 11428:1996 | Ergonomics Visual danger signals General requirements, design and testing |
| ISO 3098-2:2000 | Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks |
| IEC 60617-13:1993 | Graphical symbols for diagrams - Part 13: Analogue elements |
| ISO 8996:2004 | Ergonomics of the thermal environment Determination of metabolic rate |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| IEC 60072-2:1990 | Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360 |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 3098-0:1997 | Technical product documentation Lettering Part 0: General requirements |
| ISO 3511-4:1985 | Industrial process measurement control functions and instrumentation — Symbolic representation — Part 4: Basic symbols for process computer, interface, and shared display/control functions |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 11064-3:1999 | Ergonomic design of control centres — Part 3: Control room layout |
| ISO 31-10:1992 | Quantities and units Part 10: Nuclear reactions and ionizing radiations |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| ISO 1999:2013 | Acoustics Estimation of noise-induced hearing loss |
| ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| ISO 11399:1995 | Ergonomics of the thermal environment Principles and application of relevant International Standards |
| ISO 15535:2012 | General requirements for establishing anthropometric databases |
| ISO 11064-1:2000 | Ergonomic design of control centres Part 1: Principles for the design of control centres |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| ISO 3098-6:2000 | Technical product documentation — Lettering — Part 6: Cyrillic alphabet |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| ISO 3098-3:2000 | Technical product documentation — Lettering — Part 3: Greek alphabet |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 7574-3:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 3: Simple (transition) method for stated values for batches of machines |
| ISO 15534-1:2000 | Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
| ISO 10551:1995 | Ergonomics of the thermal environment Assessment of the influence of the thermal environment using subjective judgement scales |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 60027-2:2005 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
| ISO 9241-2:1992 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements |
| ISO 8662-1:1988 | Hand-held portable power tools Measurement of vibrations at the handle Part 1: General |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| ISO 389-3:2016 | Acoustics Reference zero for the calibration of audiometric equipment Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators |
| ISO 6189:1983 | Acoustics Pure tone air conduction threshold audiometry for hearing conservation purposes |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| ISO 3461-1:1988 | General principles for the creation of graphical symbols — Part 1: Graphical symbols for use on equipment |
| EN 1093-8:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| ISO 129:1985 | Technical drawings Dimensioning General principles, definitions, methods of execution and special indications |
| IEC 60027-4:2006 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment |
| ISO 8662-8:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| ISO 15536-1:2005 | Ergonomics Computer manikins and body templates Part 1: General requirements |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
| IEC 61131-7:2000 | Programmable controllers - Part 7: Fuzzy control programming |
| ISO 11228-1:2003 | Ergonomics Manual handling Part 1: Lifting and carrying |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| ISO 10075:1991 | Ergonomic principles related to mental work-load General terms and definitions |
| ISO 3864:1984 | Safety colours and safety signs |
| ISO 9241-8:1997 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 8: Requirements for displayed colours |
| ISO 128:1982 | Technical drawings — General principles of presentation |
| ISO 9920:2007 | Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
| ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| ISO 11064-2:2000 | Ergonomic design of control centres Part 2: Principles for the arrangement of control suites |
| ISO 9886:2004 | Ergonomics Evaluation of thermal strain by physiological measurements |
| ISO 13731:2001 | Ergonomics of the thermal environment Vocabulary and symbols |
| ISO 13407:1999 | Human-centred design processes for interactive systems |
| EN 1093-6:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| IEC 61346-2:2000 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes |
| ISO 5458:1998 | Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing |
| EN 1093-11:2001+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
| ISO 31-12:1992 | Quantities and units Part 12: Characteristic numbers |
| 1987/404/EEC : 1987 | COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS |
| ISO 9355-2:1999 | Ergonomic requirements for the design of displays and control actuators — Part 2: Displays |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| ISO 8662-7:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
| ISO 14123-2:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures |
| IEC 60617-12:1997 | Graphical symbols for diagrams - Part 12: Binary logic elements |
| ISO 9241-13:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 13: User guidance |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
| IEC 61082-2:1993 | Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams |
| IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV | Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| ISO 13406-2:2001 | Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
| EN 50082-1:1997 | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.