PD CEN/TR 14548:2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
Hardcopy , PDF
09-20-2010
English
12-09-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 References
3 Terms and definitions
4 Categorisation of test methods and other standards
5 Examination and preparation of samples
6 Category I: General methods for qualitative and/or
quantitative assessment
6.1 Adhesives
6.2 Substrates
6.2.1 Surface preparation
6.2.2 Surface assessment
6.3 Assemblies
7 Category II: Characterisation methods to obtain
quantitative design values
7.1 Adhesives
7.2 Substrates
7.2.1 Surface preparation
7.2.2 Surface assessment
7.3 Assemblies
8 Category III: Methods and standards related to safety,
storage and product life
Identifies and categorises the European and International Standards relating to structural adhesives. It encompasses the methods used to both prepare and assess surfaces and to determine the general characteristics of structural adhesives.
| Committee |
PRI/52
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Standards | Relationship |
| CEN/TR 14548:2003 | Identical |
| EN 14493 : 2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ISO 10365:1992 | Adhesives Designation of main failure patterns |
| PREN 4106 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
| EN 29142:1993/AC:1997 | ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS |
| EN 2334:1997 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| ISO 6441-2:1999 | Paints and varnishes Determination of micro-indentation hardness Part 2: Knoop hardness by measurement of indentation depth under load |
| EN 542:2003 | Adhesives - Determination of density |
| EN 1245:2011 | Adhesives - Determination of pH |
| EN 1067:2005 | Adhesives - Examination and preparation of samples for testing |
| PREN 3002 : 200P1 | AEROSPACE SERIES - CHROMIC ACID ANODIZING - TESTING OF ADHESIVES |
| EN 2497:1989 | Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN 28510-2 : 1993 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - 180 DEGREE PEEL |
| EN 1965-1:2011 | Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
| PREN 3003 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVES - DETERMINATION OF MASS PER UNIT AREA OF FILM ADHESIVES - TEST METHOD |
| EN ISO 6721-2:2008 | Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008) |
| EN 2243-5:2005 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests |
| ISO 10964:1993 | Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners |
| ISO 10123:2013 | Adhesives Determination of shear strength of anaerobic adhesives using pin-and-collar specimens |
| EN 29653 : 1994 | ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS |
| EN 1244:1998 | Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| ISO 4588:1995 | Adhesives Guidelines for the surface preparation of metals |
| ISO 4578:1997 | Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
| EN ISO 9664:1995 | Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
| EN 1066 : 1997 | ADHESIVES - SAMPLING |
| EN 12701:2001 | Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials |
| EN 28510-1:2014 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel |
| EN 2243-2:2005 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal |
| ISO 6441-1:1999 | Paints and varnishes Determination of micro-indentation hardness Part 1: Knoop hardness by measurement of indentation length |
| EN 12092:2001 | Adhesives - Determination of viscosity |
| ISO 14615:1997 | Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load |
| ISO 7619:1997 | Rubber Determination of indentation hardness by means of pocket hardness meters |
| EN 26922 : 1993 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| EN 2101:1991 | Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
| EN 543:2003 | Adhesives - Determination of apparent density of powder and granule adhesives |
| EN 14173 : 2002 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN 1965-2:2011 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 9653:1998 | Adhesives Test method for shear impact strength of adhesive bonds |
| EN 924:2003 | Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
| PREN 6041 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS ON NON-METALLIC MATERIALS (UNCURED) BY DIFFERENTIAL SCANNING CALORIMETRY (DSC) |
| EN ISO 10365:1995 | Adhesives - Designation of main failure patterns (ISO 10365:1992) |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| PREN 6040 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS OF THERMOSET SYSTEMS BY HIGH PERFORMANCE - LIQUID CHROMATOGRAPHY (HPLC) |
| PREN 2243-6 : 200P2 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVES - TEST METHOD - PART 6: DETERMINATION OF SHEAR STRESS AND SHEAR STRAIN |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 1239:2011 | Adhesives - Freeze-thaw stability |
| EN 923 : 2015 COR 2016 | ADHESIVES - TERMS AND DEFINITIONS |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| ISO 6721:1983 | Plastics Determination of damping properties and complex modulus by bending vibration |
| EN 828:2013 | Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| EN 827:2005 | Adhesives - Determination of conventional solids content and constant mass solids content |
| ISO 9664:1993 | Adhesives Test methods for fatigue properties of structural adhesives in tensile shear |
| EN ISO 10964 : 1997 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.