NF EN 62271-205 : 2008
Current
The latest, up-to-date edition.
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 205: COMPACT SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV
01-12-2013
AVANT-PROPOS
1 Généralités
2 Conditions normales et spéciales de service
3 Termes et définitions
4 Caractéristiques assignées
5 Conception et construction
6 Essais de type
Tableau 101 - Essais de type sur un ensemble
d'appareillages compact
7 Essais individuels de série
8 Guide pour le choix de l'appareillage
9 Renseignements à donner dans les appels d'offres,
les soumissions et les commandes
10 Transport, stockage, installation, manoeuvre et
maintenance
11 Sécurité
Annexe AA (informative) Explications concernant les
ensembles d'appareillages compacts
Figure AA.1 - Exemple pour le type
Figure AA.2 - Exemple pour le type
Figure AA.3 - Exemple pour le type
Figure AA.4 - Exemple pour le type
Bibliographie
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les
publications européennes correspondantes
Annexe ZB (informative) Divergences A
La présente partie de la CEI 62271 s'applique aux ensembles d'appareillages compacts comprenant au moins un appareil de connexion directement connecté à, ou partageant des composants avec, un ou plusieurs appareils tel(s) qu'il existe une interaction entre les fonctions des appareils individuels.
DevelopmentNote |
Indice de classement: C64-471-205. PR NF EN 62271-205 February 2007. (02/2007)
|
DocumentType |
Standard
|
PublisherName |
Association Francaise de Normalisation
|
Status |
Current
|
Standards | Relationship |
IEC 62271-205:2008 | Identical |
EN 62271-205:2008/corrigendum:2008 | Identical |
IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
NF EN 60044-1 : 2000 AMD 2 2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
IEC 60044-7:1999 | Instrument transformers - Part 7: Electronic voltage transformers |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
IEC 60044-5:2004 | Instrument transformers - Part 5: Capacitor voltage transformers |
NF EN 62155 : 2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
IEC 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
IEC 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEC 60044-2:1997+AMD1:2000+AMD2:2002 CSV | Instrument transformers - Part 2 : Inductive voltage transformers |
IEC 60265-2:1988 | High-voltage switches. Part 2: High-voltage switches for rated voltages of 52 kV and above |
IEC 62271-209:2007 | High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations |
NF EN 60044-7 : 2001 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
IEC 60044-3:2002 | Instrument transformers - Part 3: Combined transformers |
NF EN 60044-5 : 2004 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
NF EN 62271-209 : 2008 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 209: CABLE CONNECTIONS FOR GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV - FLUID-FILLED AND EXTRUDED INSULATION CABLES - FLUID-FILLED AND DRY TYPE CABLE-TERMINATIONS |
NF EN 62271-108 : 2006 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 108: HIGH-VOLTAGE ALTERNATING CURRENT DISCONNECTING CIRCUIT-BREAKERS FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV | Instrument transformers - Part 1: Current transformers |
IEC 61462:2007 | Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations |
IEC 62271-203:2011 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
NF EN 60044-3 : 2003 | INSTRUMENT TRANSFORMERS - PART 3: COMBINED TRANSFORMERS |
NF EN 62271-100 : 2009 AMD 2 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING CURRENT CIRCUIT-BREAKERS |
NF EN 62271-102 : 2005 AMD 2 2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES |
NF EN 60099-4 : 2015 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
NF EN 61462 : 2008 | COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS |
IEC 62271-108:2005 | High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above |
NF EN 60265-2 : 93 AMD 2 2002 | HIGH-VOLTAGE SWITCHES - PART 2: HIGH-VOLTAGE SWITCHES FOR RATED VOLTAGES OF 52 KV AND ABOVE |
NF EN 62271-203 : 2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV |
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV | High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.