NF EN 60794-1-1 : 2002
Current
The latest, up-to-date edition.
OPTICAL FIBER CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
01-12-2013
AVANT-PROPOS
1 Domaine d'application
2 Références normatives
3 Définitions
4 Câbles à fibres optiques
5 Matériaux
5.1 Nature de la fibre
5.2 Conducteurs électriques
5.3 Autres matériaux
5.4 Prescriptions relatives à l'environnement
6 Construction du câble
7 Méthodes de mesure - Généralités
8 Méthodes de mesure relatives aux dimensions
9 Méthodes de mesure relatives aux caractéristiques mécaniques
10 Méthodes de mesure relatives aux caractéristiques électriques
11 Méthodes de mesure relatives aux caractéristiques optiques
et de transmission
12 Méthodes de mesure relatives aux caractéristiques
environnementales
13 Méthodes de mesure relatives à la caractérisation des
éléments de câbles
Annexe A (informative) Guide pour l'installation des câbles à
fibres optiques
A.1 Généralités
A.2 Planification d'installation
A.3 Méthodes d'installation de câbles
A.4 Protection contre la foudre
Annexe B (informative) Guide des effets de l'hydrogène dans
les câbles à fibres optiques
B.1 Généralités
B.2 Evaluation des effets induits par l'hydrogène
B.3 Effets de l'hydrogène dans les câbles à fibres optiques
Annexe C (informative) Guide pour les applications spécifiques
définies de l'affaiblissement des fibres câblées
Bibliographie
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les publications
européennes correspondantes
Applicable to optical fibre cables for use with telecommunications equipment and devices employing similar techniques and to cables having a combination of both electrical conductors and optical fibres. Establishes uniform generic requirements for the transmission, geometrical, mechanical, material, ageing (environmental exposure) and climatic properties of optical fibre cables, and electrical requirements where appropriate.
| DevelopmentNote |
Indice de Classement: C93-850-1-1PR. Supersedes NFC 93 850 1-1. (07/2002) PR NF EN 60794-1-1 April 2011. (04/2011) PR NF EN 60794-1-1 April 2018. (05/2018)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 60794-1-1 : 2016 | Identical |
| UNE-EN 60794-1-1:2016 | Identical |
| IEC 60794-1-1:2015 | Identical |
| DIN EN 60794-1-1 : 2016 | Identical |
| BS EN 60794-1-1:2016 | Identical |
| I.S. EN 60794-1-1:2016 | Identical |
| EN 60794-1-1:2016 | Identical |
| NF EN 187105 : 2002 | SINGLE-MODE OPTICAL FIBRE CABLE (DUCT/DIRECT BURIED INSTALLATION) |
| NF EN 60794-2-50 : 2009 | OPTICAL FIBRE CABLES - PART 2-50: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES |
| NF EN 60794-4-10 : 2007 | OPTICAL FIBRE CABLES - PART 4-10: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR OPGW (OPTICAL GROUND WIRES) |
| NF EN 60793-1-46 : 2002 | OPTICAL FIBERS - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE |
| IEC 60793-1-44:2011 | Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength |
| IEC 60793-1-41:2010 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
| IEC 60793-1-43:2015 | Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement |
| IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 60793-1-4:2001 | Optical fibres - Part 1-4: Generic specification - Measuring methods for transmission and optical characteristics |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
| IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| NF EN 60793-1-40 : 2004 | OPTICAL FIBERS - PART 1-40: MEASUREMENT METHODS AND TEST PROCEDURES - ATTENUATION |
| IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
| IEC 60885-1:1987 | Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V |
| IEC 60793-1-42:2013 | Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion |
| IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
| NF EN 60794-1-2 : 2017 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE |
| NF EN 60793-1-41 : 2011 | OPTICAL FIBERS - PART 1-41: MEASUREMENT METHODS AND TEST PROCEDURES - BANDWIDTH |
| NFC 32 074 : 1993 | TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH AND CONDUCTIVITY |
| IEC 60793-1-46:2001 | Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance |
| IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| NF EN 60793-1-20 : 2015 | OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY |
| NF EN 60793-1-42 : 2013 | OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES - CHROMATIC DISPERSION |
| IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| IEC 60793-1-21:2001 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| NF EN 60793-1-21 : 2002 | OPTICAL FIBERS - PART 1-21: MEASUREMENT METHODS AND TEST PROCEDURES - COATING GEOMETRY |
| IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
| NF EN 60811 1-1 : 96 AMD 1 2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1: GENERAL APPLICATION - SECTION 1: MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING THE MECHANICAL PROPERTIES |
| IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| NF EN 60793-1-22 : 2002 | OPTICAL FIBERS - PART 1-22: MEASUREMENTS METHODS AND TEST PROCEDURES - LENGTH MEASUREMENT |
| NF EN 60793-1-43 : 2002 | OPTICAL FIBERS - PART 1-43: MEASUREMENT METHODS AND TEST PROCEDURES - NUMERICAL APERTURE |
| IEC 60793-1-20:2014 | Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry |
| HD 602 : 200S1 | TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY |
| HD 405.3 : 200S1 | TESTS OF ELECTRIC CABLES UNDER FIRE CONDITIONS - TESTS ON BUNCHED WIRES OR CABLES |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| IEC 60793-1-22:2001 | Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement |
| IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
| NF EN 60793-1-44 : 2012 | OPTICAL FIBERS - PART 1-44: MEASUREMENTS METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.