MIL-DTL-83296 Revision B:2009
Current
Current
The latest, up-to-date edition.
Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
Available format(s)
PDF
Published date
10-14-2009
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for fittings, corrosion resistant steel, high temperature, high pressure (3000 psi), hydraulic and pneumatic.
| DevelopmentNote |
Supersedes MIL F 83296 (08/2001)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for fittings, corrosion resistant steel, high temperature, high pressure (3000 psi), hydraulic and pneumatic. These fittings are for use with MIL-DTL-83798 hose, conductive polytetrafluoroethylene (PTFE) smooth bore tube (see 6.1).
| MIL-DTL-32330-2 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flareless, Tube to Hose with Swivel Nut (No S/S Document) |
| MS27637 Revision C:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
| MS27638 Revision E:2009 | MANDREL SLEEVE SETTING |
| MS27630 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 45 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
| SAE ARP 4925 : 2014 | AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
| MIL-DTL-32330 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut |
| MS27618 Revision C:2018 | Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27621 Revision C:2018 | Elbow Sub Assembly, Flared, 90 Degree, Swivel Nut |
| MS27619 Revision C:2018 | Nipple Sub Assembly, Flared, Straight - with Swivel Nut |
| MS27628 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
| MIL-DTL-32330-1 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Flared, Tube to Hose with Swivel Nut (No S/S Document) |
| MS27627 Revision B:2009 | ELBOW, FLARED, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
| MIL-DTL-83298 Revision C:2009 | Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
| MS27633 Revision B:2009 | ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES, SWIVEL NUT |
| MS27624 Revision B:2009 | UNION, NIPPLE |
| MS27625 Revision D:2018 | Wire, Retainer |
| MS27617 Revision C:2018 | Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27631 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE-WITH SWIVEL NUT |
| MS27626 Revision B:2009 | NIPPLE, FLARED, TUBE TO HOSE-SWIVEL NUT |
| MS27635 Revision C:2009 | NIPPLE, FLARELESS, TUBE TO HOSE, SWIVEL NUT |
| MS27632 Revision B:2009 | NIPPLE SUB ASSEMBLY, FLARELESS, STRAIGHT-WITH SWIVEL NUT |
| MS27636 Revision B:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
| MS27616 Revision C:2018 | Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
| SAE ARP 4752 : 2013 | AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
| MS27639 Revision B:2009 | Disassembly Tool |
| MS27622 Revision C:2018 | Socket, Hose Coupling |
| MS27620 Revision C:2018 | Elbow Sub Assembly, Flared, 45 Degrees, Swivel Nut |
| MS27629 Revision B:2009 | ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT |
| MS27623 Revision D:2018 | SLEEVE, HOSE COUPLING |
| MS27634 Revision B:2009 | ELBOW SUB ASSEMBLY, FLARELESS, 90 DEGREES, SWIVEL NUT |
| MIL-DTL-32330 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| SAE AS 603 : 2015 | IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| AWS C3.6M/C3.6 : 2016 | SPECIFICATION FOR FURNACE BRAZING |
| SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| AWS C3.4M/C3.4 : 2016 | SPECIFICATION FOR TORCH BRAZING |
| MIL-DTL-83298 Revision C:2009 | Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AS 2078 : 2015 | TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AS 33514 : 2015 | FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL |
| AWS D17.1/D17.1M : 2012 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.