ISO 15605:2000
Current
Current
The latest, up-to-date edition.
Adhesives Sampling
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Language(s)
English, French
Published date
12-14-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This International Standard specifies methods for sampling adhesives and related products, in order to obtain uniform
samples of convenient size which are adequately representative of the product being sampled. The sample or
samples so obtained are suitable for examination and preparation prior to testing.
The methods are applicable to products which require the addition and mixing in of catalysts or hardeners prior to
their application, by sampling each component separately. The methods are not applicable, however, to sampling
from a stream of adhesive (in this case the samples can be prepared in accordance with ISO 8213).
This International Standard does not apply to animal glues.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 15605:2004-11 | Identical |
| EN ISO 15605:2004 | Identical |
| DIN EN 1066:1997-11 | Identical |
| UNE-EN ISO 15605:2004 | Identical |
| NBN EN ISO 15605 : 2004 | Identical |
| NF EN ISO 15605 : 2004 | Identical |
| NEN EN ISO 15605 : 2004 | Identical |
| NS EN ISO 15605 : 1ED 2004 | Identical |
| I.S. EN ISO 15605:2004 | Identical |
| PN EN ISO 15605 : 2005 | Identical |
| SN EN ISO 15605 : 2004 | Identical |
| UNI EN ISO 15605 : 2005 | Identical |
| BS EN ISO 15605:2004 | Identical |
| DIN EN 1066:1997-11 | Corresponds |
| ISO 26842-1:2013 | Adhesives Test methods for the evaluation and selection of adhesives for indoor wood products Part 1: Resistance to delamination in non-severe environments |
| 15/30329437 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| 14/30314735 DC : 0 | BS EN 12004-2 - ADHESIVES FOR TILES - PART 2: TEST METHODS |
| BS EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| I.S. EN 12002:2008 | ADHESIVES FOR TILES - DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| BS ISO 26842-1:2013 | Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products Resistance to delamination in non-severe environments |
| 10/30231817 DC : 0 | BS EN 12705 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| PREN 1372 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 08/30174970 DC : DRAFT FEB 2008 | BS EN 12003 - ADHESIVE FOR TILES - DETERMINATION OF SHEAR ADHESION STRENGTH OF REACTION RESIN ADHESIVES |
| 12/30252886 DC | BS ISO 10364. Structural adhesives. Determination of the pot life (working life) of multi-component adhesives |
| 04/30122909 DC : DRAFT SEP 2004 | ISO 19212 - ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH |
| 08/30174384 DC : DRAFT FEB 2008 | BS EN 12808-1 - GROUTS FOR TILES - PART 1: DETERMINATION OF CHEMICAL RESISTANCE OF REACTION RESIN MORTARS |
| 10/30229682 DC : 0 | BS ISO 26842-2 - ADHESIVES - TEST METHODS FOR THE EVALUATION AND SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS - PART 2: RESISTANCE TO DELAMINATION IN SEVERE ENVIRONMENTS |
| 14/30296756 DC : 0 | BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| 14/30295041 DC : 0 | BS ISO 19095-2 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 2: TEST SPECIMENS |
| 12/30248096 DC : 0 | BS ISO 17178 - ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| BS EN 12004-2:2017 | Adhesives for ceramic tiles Test methods |
| PREN 1373 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| DIN EN 13999-1:2014-03 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| BS EN 12003:2008 | Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives |
| UNE-EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| BS EN 827:2005 | Adhesives. Determination of conventional solids content and constant mass solids content |
| UNE-EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| BS EN 12703:2012 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature |
| BS EN ISO 14678:2005 | Adhesives. Determination of resistance to flow (sagging) |
| BS EN 14713:2005 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding |
| UNE-EN 13999-1:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| BS EN 1067:2005 | Adhesives. Examination and preparation of samples for testing |
| UNE-EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| BS EN 1308:1999 | Adhesives for tiles. Determination of slip |
| BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
| I.S. EN 12808-2:2008 | GROUTS FOR TILES - PART 2: DETERMINATION OF RESISTANCE TO ABRASION |
| DIN EN 1245:2011-07 | Adhesives - Determination of pH |
| EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| DIN EN 12808-3:2009-01 | Grouts for tiles - Determination of flexural and compressive strength |
| EN 12705:2011 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| EN 12002:2008 | Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts |
| EN 12808-1:2008 | Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
| EN 12704:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| DIN EN 14891:2017-05 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| EN 1243:2011 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| EN 1238:2011 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 12808-2:2008 | Grouts for tiles - Part 2: Determination of resistance to abrasion |
| EN 1239:2011 | Adhesives - Freeze-thaw stability |
| EN 12962:2011 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 1245:2011 | Adhesives - Determination of pH |
| EN 1242:2013 | Adhesives - Determination of isocyanate content |
| EN 1348:2007 | Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives |
| PREN 1238 : DRAFT 2010 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| 12/30259191 DC : DRAFT JULY 2012 | BS EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| 10/30229679 DC : 0 | BS ISO 26842-1 - ADHESIVES - TEST METHODS FOR THE EVALUATION AND SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS - PART 1: RESISTANCE TO DELAMINATION IN NON-SEVERE ENVIRONMENTS |
| DIN EN 16556:2015-01 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 11/30247568 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 08/30174775 DC : DRAFT FEB 2008 | BS EN 12808-2 - GROUTS FOR TILES - PART 2: DETERMINATION OF RESISTANCE TO ABRASION |
| BS ISO 19212:2006 | Adhesives. Determination of temperature dependence of shear strength |
| 15/30329434 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 14/30296759 DC : 0 | BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| 11/30248435 DC : 0 | BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 07/30151497 DC : 0 | ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING |
| BS ISO 26842-2:2013 | Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products Resistance to delamination in severe environments |
| 14/30314741 DC : 0 | BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 11/30247565 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| I.S. EN ISO 10364:2018 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES (ISO 10364:2015) |
| UNE-EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 1242:2013-05 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 12962:2011-07 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| DIN EN 12705:2011-08 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| DIN EN 12704:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| DIN EN 1347:2007-10 | ADHESIVES FOR TILES - DETERMINATION OF WETTING CAPABILITY |
| DIN EN 1243:2011-07 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| DIN EN 12003:2009-01 | ADHESIVE FOR TILES - DETERMINATION OF SHEAR ADHESION STRENGTH OF REACTION RESIN ADHESIVES |
| DIN EN ISO 9311-3:2005-06 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
| DIN EN 14713:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| DIN EN 12002:2009-01 | ADHESIVES FOR TILES - DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS |
| BS EN 1238:1999 | Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) |
| BS EN 1902:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
| DIN EN 14891:2015-02 (Draft) | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| BS EN 1347:1999 | Adhesives for tiles. Determination of wetting capability |
| DIN EN 15274:2015-06 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| BS EN 12808-3:2008 | Grouts for tiles Determination of flexural and compressive strength |
| I.S. EN 827:2006 | ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
| I.S. EN 1242:2013 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 1902:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 12704:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| DIN EN 1240:2011-07 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| I.S. EN 1238:2011 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| DIN EN 1308:2007-11 | ADHESIVES FOR TILES - DETERMINATION OF SLIP |
| I.S. EN 1239:2011 | ADHESIVES - FREEZE-THAW STABILITY |
| DIN EN 1347:1999-03 | ADHESIVES FOR TILES - DETERMINATION OF WETTING CAPABILITY |
| I.S. EN 1240:2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| I.S. EN 1347:2007 | ADHESIVES FOR TILES - DETERMINATION OF WETTING CAPABILITY |
| I.S. EN 1067:2006 | ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| I.S. EN 12808-3:2008 | GROUTS FOR TILES - PART 3: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| DIN EN 1348:2007-11 | ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| I.S. EN 12962:2011 | ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| I.S. EN 12808-5:2008 | GROUTS FOR TILES - PART 5: DETERMINATION OF WATER ABSORPTION |
| DIN EN 1239:2011-07 | Adhesives - Freeze-thaw stability |
| DIN EN 1903:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| DIN EN 1346:2007-11 | ADHESIVES FOR TILES - DETERMINATION OF OPEN TIME |
| I.S. EN ISO 9311-2:2011 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| I.S. EN 12808-4:2009 | GROUTS FOR TILES - PART 4: DETERMINATION OF SHRINKAGE |
| I.S. EN 12808-1:2008 | GROUTS FOR TILES - PART 1: DETERMINATION OF CHEMICAL RESISTANCE OF REACTION RESIN MORTARS |
| I.S. EN 13999-1:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| I.S. EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| I.S. EN 1245:2011 | ADHESIVES - DETERMINATION OF PH |
| I.S. EN 12703:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| I.S. EN 15274:2015 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14713:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| I.S. EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 14891:2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| I.S. EN 12705:2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| DIN EN 1324:2007-11 | ADHESIVES FOR TILES - DETERMINATION OF SHEAR ADHESION STRENGTH OF DISPERSION ADHESIVES |
| I.S. EN 1243:2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| ONORM EN 12808-4 : 2011 | GROUTS FOR TILES - PART 4: DETERMINATION OF SHRINKAGE |
| I.S. EN 1346:2007 | ADHESIVES FOR TILES - DETERMINATION OF OPEN TIME |
| PREN 12703 : DRAFT 2015 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 14/30296753 DC : 0 | BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 14/30300568 DC : 0 | BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| PREN 12808-4 : DRAFT 2008 | GROUTS FOR TILES - PART 4: DETERMINATION OF SHRINKAGE |
| 08/30174778 DC : DRAFT FEB 2008 | BS EN 12808-3 - GROUTS FOR TILES - PART 3: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| 10/30231811 DC : DRAFT SEP 2010 | BS EN 1245 - ADHESIVES - DETERMINATION OF PH |
| 10/30231808 DC : 0 | BS EN 1243 - ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| PREN 12704 : DRAFT 2015 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| PREN 14891 : DRAFT 2014 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| PREN 1240 : DRAFT 2010 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| DIN EN 12004-2:2015-02 (Draft) | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| EN ISO 10364:2018 | Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015) |
| DIN EN 1372:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| DIN EN 1238:2011-07 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| DIN EN 1373:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| DIN EN 12703:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| DIN EN ISO 9311-2:2011-12 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| DIN EN ISO 14678:2005-11 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| UNE-EN 1242:2013 | Adhesives - Determination of isocyanate content |
| UNE-EN 12703:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| BS EN 12808-4:2009 | Grouts for tiles Determination of shrinkage |
| BS EN 1348:1999 | Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives |
| UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| UNE-EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| UNI EN ISO 9311-2 : 2011 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| UNI EN 12705 : 2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| UNI EN 12808-1 : 2009 | GROUTS FOR TILES - PART 1: DETERMINATION OF CHEMICAL RESISTANCE OF REACTION RESIN MORTARS |
| UNI EN 13999-1 : 2014 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| UNI EN 1348 : 2008 | ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| UNI EN 1240 : 2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| UNI EN 1245 : 2011 | ADHESIVES - DETERMINATION OF PH |
| UNI EN 1347 : 2007 | ADHESIVES FOR TILES - DETERMINATION OF WETTING CAPABILITY |
| UNI EN 12962 : 2011 | ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| EN 12808-5:2008 | Grouts for tiles - Part 5: Determination of water absorption |
| UNI EN 12808-5 : 2009 | GROUTS FOR TILES - PART 5: DETERMINATION OF WATER ABSORPTION |
| UNI EN 12808-3 : 2009 | GROUTS FOR TILES - PART 3: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| UNI EN 12002 : 2009 | ADHESIVES FOR TILES - DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS |
| UNI EN 12808-2 : 2009 | GROUTS FOR TILES - PART 2: DETERMINATION OF RESISTANCE TO ABRASION |
| UNI EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| UNI EN 12003 : 2009 | ADHESIVES FOR TILES - DETERMINATION OF SHEAR ADHESION STRENGTH OF REACTION RESIN ADHESIVES |
| UNI EN 12808-4 : 2009 | GROUTS FOR TILES - PART 4: DETERMINATION OF SHRINKAGE |
| EN 13999-1:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| UNI EN 1238 : 2011 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| UNI EN 1242 : 2013 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| UNI EN 1243 : 2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| UNI EN 1239 : 2011 | ADHESIVES - FREEZE-THAW STABILITY |
| UNI EN 14022 : 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
| 12/30259194 DC : 0 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| 13/30259197 DC : 0 | BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| I.S. EN 1348:2007 | ADHESIVES FOR TILES - DETERMINATION OF TENSILE ADHESION STRENGTH FOR CEMENTITIOUS ADHESIVES |
| I.S. EN 14022:2010 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
| ISO 26842-2:2013 | Adhesives Test methods for the evaluation and selection of adhesives for indoor wood products Part 2: Resistance to delamination in severe environments |
| I.S. EN 1308:2007 | ADHESIVES FOR TILES - DETERMINATION OF SLIP |
| BS ISO 13007-5:2015 | Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| 14/30296750 DC : 0 | BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| PREN 13999-1 : DRAFT 2012 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| 10/30231805 DC : 0 | BS EN 1240 - ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| I.S. EN 1324:2007 | ADHESIVES FOR TILES - DETERMINATION OF SHEAR ADHESION STRENGTH OF DISPERSION ADHESIVES |
| 07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| PREN 15274 : DRAFT 2014 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 10/30231814 DC : DRAFT SEP 2010 | BS EN 12962 - ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| 05/30131552 DC : DRAFT APR 2005 | EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| 12/30242496 DC : DRAFT MAR 2012 | BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS |
| 10/30231823 DC : DRAFT SEP 2010 | BS EN 1239 - ADHESIVES - FREEZE-THAW STABILITY |
| 08/30174781 DC : DRAFT FEB 2008 | BS EN 12808-5 - GROUTS FOR TILES - PART 5: DETERMINATION OF WATER ABSORPTION |
| ISO 10364:2015 | Structural adhesives — Determination of the pot life (working life) of multi-component adhesives |
| I.S. EN 16556:2014 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
| I.S. EN 12004-2:2017 | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| ISO 17178:2013 | Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
| PREN 1903 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| PREN 12705 : DRAFT 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| DIN EN 1067:2006-03 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 14022:2010-06 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTICOMPONENT ADHESIVES |
| DIN EN 12808-4:2009-10 | Grouts for tiles - Part 4: Determination of shrinkage |
| BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| UNE-EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| BS EN 1239:1998 | Adhesives. Freeze-thaw stability |
| BS EN 12808-2:2008 | Grouts for tiles Determination of resistance to abrasion |
| BS EN 1242:2013 | Adhesives. Determination of isocyanate content |
| BS EN 1903:2015 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
| BS EN 1373:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
| ISO 9311-3:2005 | Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure |
| BS EN 12808-1:2008 | Grouts for tiles Determination of chemical resistance of reaction resin mortars |
| BS EN 12808-5:2008 | Grouts for tiles Determination of water absorption |
| BS EN 1324:1999 | Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives |
| UNE-EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| BS EN 12704:2012 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives |
| BS EN 12705:2011 | Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
| I.S. EN 1372:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| ISO 14678:2005 | Adhesives Determination of resistance to flow (sagging) |
| UNE-EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| BS EN 1240:1998 | Adhesives. Determination of hydroxyl value and/or hydroxyl content |
| I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| ISO 9311-2:2011 | Adhesives for thermoplastic piping systems Part 2: Determination of shear strength |
| BS EN 1372:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
| BS EN 1243:1999 | Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| UNE-EN 14713:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| BS EN 1245:1999 | Adhesives. Determination of pH. Test method |
| I.S. EN 1373:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| I.S. EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| BS EN 12962:2001 | Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 14713:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN ISO 14678:2005 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005) |
| EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| EN 827:2005 | Adhesives - Determination of conventional solids content and constant mass solids content |
| EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| EN 14293:2006 | Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
| 10/30231820 DC : 0 | BS EN 1238 - ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| PREN 1902 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 12003:2008 | ADHESIVE FOR TILES - DETERMINATION OF SHEAR ADHESION STRENGTH OF REACTION RESIN ADHESIVES |
| 08/30189560 DC : 0 | BS EN 12808-4 - GROUTS FOR TILES - PART 4: DETERMINATION OF SHRINKAGE |
| BS ISO 17178:2013 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| ISO 19212:2006 | Adhesives Determination of temperature dependence of shear strength |
| PREN 1243 : DRAFT 2010 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| UNE-EN 12004-2:2017 | Adhesives for ceramic tiles - Part 2: Test methods |
| ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
| ISO 13007-5:2015 | Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| BS EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| BS EN 15274:2015 | General purpose adhesives for structural assembly. Requirements and test methods |
| BS EN 14022:2003 | Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives |
| UNE-EN 12704:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| BS EN 1346:1999 | Adhesives for tiles. Determination of open time |
| BS EN 12002:2008 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems Determination of shear strength |
| BS EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems Test method for the determination of resistance to internal pressure |
| BS EN 13999-1:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| DIN EN 827:2006-03 | Adhesives - Determination of conventional solids content and constant mass solids content |
| DIN EN 12004-2:2017-05 | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 12703:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| DIN EN 12808-2:2009-01 | Grouts for tiles - Part 2: Determination of resistance to abrasion |
| EN 12808-3:2008 | Grouts for tiles - Part 3: Determination of flexural and compressive strength |
| EN 1308:2007 | Adhesives for tiles - Determination of slip |
| EN 1347:2007 | Adhesives for tiles - Determination of wetting capability |
| EN 1324:2007 | Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives |
| EN 1346:2007 | Adhesives for tiles - Determination of open time |
| EN 12004-2:2017 | Adhesives for ceramic tiles - Part 2: Test methods |
| DIN EN 12808-1:2009-01 | Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars |
| EN 1067:2005 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 12808-5:2009-01 | Grouts for tiles - Part 5: Determination of water absorption |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| AS ISO 13007.5:2020 | Ceramic tiles - Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 8213:1986 | Chemical products for industrial use — Sampling techniques — Solid chemical products in the form of particles varying from powders to coarse lumps |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.