ISO 11843-1:1997
Current
Current
The latest, up-to-date edition.
Capability of detection — Part 1: Terms and definitions
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
06-26-1997
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
ISO/TC 69/SC 6
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN ISO 11843-1:2004-09 | Identical |
| GOST R ISO 11843-1 : 2007 | Identical |
| NEN-ISO 11843-1 :2003 | Identical |
| BS ISO 11843-1:1997 | Identical |
| PN ISO 11843-1 : 2003 | Identical |
| NEN ISO 11843-1 : 2003 C1 2003 | Identical |
| NF ISO 11843-1 : 1998 | Identical |
| BIS IS/ISO 11843-1 : 1997 | Identical |
| SAC GB/T 33260.1 : 2016 | Identical |
| DIN 55350-34:1991-02 | Identical |
| JIS Z 8462-1:2001 | Identical |
| UNI ISO 11843-1 : 2009 | Identical |
| SS-ISO 11843-1:2005 | Identical |
| AS ISO 11843.1-2004 | Identical |
| DIN 55350-34:1991-02 | Corresponds |
| IEC 63041-2:2017 | Piezoelectric sensors - Part 2: Chemical and biochemical sensors |
| 17/30341492 DC : 0 | BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS |
| BS ISO 11843-3:2003 | Capability of detection Methodology for determination of the critical value for the response variable when no calibration data are used |
| ISO 11843-5:2008 | Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases |
| 08/30182372 DC : DRAFT JULY 2008 | BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 16/30342876 DC : 0 | BS EN 15550 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO 11843-4:2003 | Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
| I.S. CEN TS 14793:2005 | STATIONARY SOURCE EMISSION - INTRALABORATORY VALIDATION PROCEDURE FOR AN ALTERNATIVE METHOD COMPARED TO A REFERENCE METHOD |
| ISO 11843-7:2012 | Capability of detection Part 7: Methodology based on stochastic properties of instrumental noise |
| ISO/TS 21098:2005 | Foodstuffs Nucleic acid based methods of analysis of genetically modified organisms and derived products Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571 |
| CEN/TS 14793:2005 | Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
| EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| 06/30112308 DC : 0 | EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| 02/400884 DC : DRAFT OCT 2002 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| UNI EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| PREN 15550 : DRAFT 2016 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| DIN 55350-11:2008-05 | Concepts for quality management - Part 11: Supplement to DIN EN ISO 9000:2005 |
| BS ISO 16258-2:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Method by indirect analysis |
| ISO 11843-2:2000 | Capability of detection — Part 2: Methodology in the linear calibration case |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| DD CEN/TS 14793:2005 | Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method |
| ISO 16258-2:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 2: Method by indirect analysis |
| ISO 11843-3:2003 | Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
| ISO 11843-6:2013 | Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| BS EN 15550:2017 | Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
| I.S. EN 15550:2017 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| 07/30148930 DC : 0 | BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| BS ISO 16258-1:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Direct-on-filter method |
| 02/400883 DC : DRAFT OCT 2002 | CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| UNI ISO 11843-6 : 2014 | CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS |
| 16/30288734 DC : 0 | BS ISO 19087 - WORKPLACE AIR - ANALYSIS OF RESPIRABLE CRYSTALLINE SILICA BY FOURIER-TRANSFORM INFRARED SPECTROSCOPY |
| BS ISO 12828-1:2011 | Validation method for fire gas analysis Limits of detection and quantification |
| BS ISO 11843-4:2003 | Capability of detection Methodology for comparing the minimum detectable value with a given value |
| 17/30328289 DC : 0 | BS ISO 11843-7 - CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE |
| ISO 20391-1:2018 | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods |
| DD ISO/TS 21098:2005 | Foodstuffs. Nucleic acid based methods of analysis of genetically modified organisms and derived products. Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 and ISO 21571 |
| I.S. EN IEC 63041-2:2018 | PIEZOELECTRIC SENSORS - PART 2: CHEMICAL AND BIOCHEMICAL SENSORS |
| UNI ISO 11843-2 : 2009 | CAPABILITY OF DETECTION - PART 2: METHODOLOGY IN THE LINEAR CALIBRATION CASE |
| EN ISO 6143:2006 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| UNI ISO 11843-5 : 2014 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| I.S. EN 15842:2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| BS ISO 11843-2:2000 | Capability of detection Methodology in the linear calibration case |
| BS EN 14793:2017 | Stationary source emissions. Demonstration of equivalence of an alternative method with a reference method |
| UNI ISO 11843-4 : 2014 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| ISO 12828-1:2011 | Validation method for fire gas analysis — Part 1: Limits of detection and quantification |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| 04/30112961 DC : DRAFT APR 2004 | BS ISO/DIS 9169 - AIR QUALITY - DEFINITION AND DETERMINATION OF PERFORMANCE CHARACTERISTICS OF AN AUTOMATIC MEASURING SYSTEM |
| BS ISO 11843-6:2013 | Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| EN IEC 63041-2:2018 | Piezoelectric Sensors - Part 2: Chemical and Biochemical Sensors |
| BS EN ISO 9169:2006 | Air quality. Definition and determination of performance characteristics of an automatic measuring system |
| ISO 6143:2001 | Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures |
| UNE-EN 15550:2018 | Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
| DIN EN 15550:2016-11 (Draft) | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| ISO 9169:2006 | Air quality Definition and determination of performance characteristics of an automatic measuring system |
| BS EN ISO 6143:2006 | Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures |
| EN 15842:2010 | Foodstuffs - Detection of food allergens - General considerations and validation of methods |
| EN ISO 9169:2006 | Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006) |
| EN 15550:2017 | Animal feeding stuffs: Methods of sampling and analysis - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
| 14/30293538 DC : 0 | BS EN 14793 - STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH THE REFERENCE METHOD |
| UNE-EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| BS ISO 11843-7:2012 | Capability of detection Methodology based on stochastic properties of instrumental noise |
| DIN ISO 6143 E : 2004 | GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES |
| 10/30204124 DC : DRAFT DEC 2010 | ISO/DIS 11843-6 - CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUES IN POISSON DISTRIBUTION MEASUREMENTS |
| BS ISO 6143 : 2001 AMD 16904 | GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES |
| PD ISO GUIDE 35:2017 | Reference materials. Guidance for characterization and assessment of homogeneity and stability |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS ISO 11843-5 : 2008 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| I.S. EN 14793:2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| UNI ISO 11843-7 : 2014 | CAPABILITY OF DETECTION - PART 7: METHODOLOGY BASED ON STOCHASTIC PROPERTIES OF INSTRUMENTAL NOISE |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| ISO 16258-1:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 1: Direct-on-filter method |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO/TS 13530:2009 | Water quality — Guidance on analytical quality control for chemical and physicochemical water analysis |
| DIN EN ISO 9169:2006-09 | Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006) |
| DIN ISO 6143:2004-05 | GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES |
| DIN EN ISO 6143:2006-11 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) |
| DIN EN 15550:2017-10 | ANIMAL FEEDING STUFFS - METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF CADMIUM AND LEAD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) AFTER PRESSURE DIGESTION |
| CLSI EP12:2023 | Evaluation of Qualitative, Binary Output Examination Performance |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.