IEC TR 61850-90-5:2012
Current
The latest, up-to-date edition.
Communication networks and systems for power utility automation - Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-09-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Use cases
6 Modelling considerations
7 Communication requirements
8 Security model
9 Services
10 IEC logical node modelling for
synchrophasor measurements
11 Synchrophasor profile mappings
12 Effects on IEC 61850-5
13 Effects on the IEC 61850-6 (SCL)
14 Effect on IEC 61850-7-2
15 Effect on IEC 61850-7-4
Annex A (informative) - Full SCL example for
C37.118.2 configuration
Annex B (informative) - SCL examples for direct
PMU and PDC-oriented communication
Annex C (informative) - Migration from IEEE C37.118
to IEC 61850
Annex D (informative) - Open system interconnect
(OSI) model
Annex E (informative) - IPv6
Annex F (informative) - Edge authentication
Annex G (informative) - Example of A-Profile
encodings
Annex H (informative) - Improving reliability of
R-SV transmissions
Annex I (informative) - Guidance on HMAC
and truncation
Bibliography
IEC/TR 61850-90-5:2012(E) provides a way of exchanging synchrophasor data between PMUs, PDCs WAMPAC (Wide Area Monitoring, Protection, and Control), and between control center applications. The data, to the extent covered in IEEE C37.118-2005, are transported in a way that is compliant to the concepts of IEC 61850. However, given the primary scope and use cases, this document also provides routable profiles for IEC 61850-8-1 GOOSE and IEC 61850-9-2 SV packets. These routable packets can be utilized to transport general IEC 61850 data as well as synchrophasor data. Keywords: communication network, power utility, synchrophasor.
| Committee |
TC 57
|
| DevelopmentNote |
Stability Date: 2015. (10/2012)
|
| DocumentType |
Technical Report
|
| Pages |
149
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| PD IEC/TR 61850-90-5:2012 | Identical |
| NEN NPR IEC/TR 61850-90-5 : 2012 | Identical |
| IEEE C37.242-2013 | IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control |
| IEC TR 62351-13:2016 | Power systems management and associated information exchange - Data and communications security - Part 13: Guidelines on security topics to be covered in standards and specifications |
| PD IEC/TR 61850-90-12:2015 | Communication networks and systems for power utility automation Wide area network engineering guidelines |
| PD IEC/TR 62351-10:2012 | Power systems management and associated information exchange. Data and communications security Security architecture guidelines |
| IEEE C37.244-2013 | IEEE Guide for Phasor Data Concentrator Requirements for Power System Protection, Control, and Monitoring |
| PD IEC/TR 61850-90-4:2013 | Communication networks and systems for power utility automation Network engineering guidelines |
| IEC TR 62351-10:2012 | Power systems management and associated information exchange - Data and communications security - Part 10: Security architecture guidelines |
| IEC TR 62357-200:2015 | Power systems management and associated information exchange - Part 200: Guidelines for migration from Internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6) |
| PD IEC/TR 61850-90-2:2016 | Communication networks and systems for power utility automation Using IEC 61850 for communication between substations and control centres |
| PD IEC/TR 62357-200:2015 | Power systems management and associated information exchange Guidelines for migration from Internet Protocol version 4 (IPv4) to Internet Protocol version 6 (IPv6) |
| IEEE 1815.1-2015 | IEEE Standard for Exchanging Information Between Networks Implementing IEC 61850 and IEEE Std 1815(TM) [Distributed Network Protocol (DNP3)] |
| IEEE 2030.100-2017 | IEEE Recommended Practice for Implementing an IEC 61850-Based Substation Communications, Protection, Monitoring, and Control System |
| IEC TR 61850-90-2:2016 | Communication networks and systems for power utility automation - Part 90-2: Using IEC 61850 for communication between substations and control centres |
| ISO/IEC 19772:2009 | Information technology Security techniques Authenticated encryption |
| IEC 61850-7-2:2010 | Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) |
| ISO 9506-2:2003 | Industrial automation systems Manufacturing Message Specification Part 2: Protocol specification |
| IEEE C37.118.1-2011 | IEEE Standard for Synchrophasor Measurements for Power Systems |
| IEC TS 62351-6:2007 | Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850 |
| IEC 62439-3:2016 | Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) |
| IEC 61850-6:2009 | Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs |
| IEC TS 62351-2:2008 | Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms |
| ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
| IEEE 802.1Q-2014 | IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks |
| IEEE 1344-1995 | IEEE Standard for Synchrophasors for Power Systems |
| ISO/IEC 9798-4:1999 | Information technology Security techniques Entity authentication Part 4: Mechanisms using a cryptographic check function |
| ISO 9506-1:2003 | Industrial automation systems Manufacturing Message Specification Part 1: Service definition |
| IEC 61850-7-1:2011 | Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models |
| IEC TR 61850-90-1:2010 | Communication networks and systems for power utility automation - Part 90-1: Use of IEC 61850 for the communication between substations |
| IEEE C37.238-2011 | IEEE Standard Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications |
| IEC 61850-8-1:2011 | Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 |
| IEC 61850-9-2:2011 | Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 |
| IEC TS 62351-7:2010 | Power systems management and associated information exchange - Data and communications security - Part 7: Network and system management (NSM) data object models |
| IEC 61850-7-4:2010 | Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes |
| IEC TS 62351-1:2007 | Power systems management and associated information exchange - Data and communications security - Part 1: Communication network and system security - Introduction to security issues |
| IEC 61850-7-3:2010 | Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes |
| IEC TS 61850-2:2003 | Communication networks and systems in substations - Part 2: Glossary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.