I.S. EN 60695-7-1:2010
Current
The latest, up-to-date edition.
FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENTS - GENERAL GUIDANCE
Hardcopy , PDF
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Factors determining toxic hazard
5 General aspects of small-scale test methods used to
evaluate the toxic hazard of fire gas effluent
6 Evaluation of test methods
7 Relevance of toxic hazard data to fire hazard
assessment
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Specifies guidance on the factors which affect the toxic hazard from fires involving electrotechnical products, and provides information on the methodologies recommended by ISO TC 92 (SC 3) for estimating and reducing the toxic hazard from fires, as expressed in ISO 19706, ISO 13344 and ISO 13571.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
BS EN 60695-7-1:2010 | Identical |
DIN EN 60695-7-1 : 2011 | Identical |
SN EN 60695-7-1 : 1995 | Identical |
NF EN 60695-7-1 : 2011 | Identical |
EN 60695-7-1:2010 | Identical |
IEC 60695-7-1:2010 | Identical |
UNE-EN 60695-7-1:2011 | Identical |
ISO 13344:2015 | Estimation of the lethal toxic potency of fire effluents |
ISO 16312-1:2016 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
IEC 60695-6-1:2005+AMD1:2010 CSV | Fire hazard testing - Part 6-1: Smoke obscuration - General guidance |
ISO 13943:2017 | Fire safety — Vocabulary |
IEC TS 60695-7-50:2002 | Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
EN 60695-7-3 : 2011 | FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011) |
IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
NFPA SFPE HANDBOOK (CD-ROM) : 2001 | SFPE HANDBOOK OF FIRE PROTECTION ENGINEERING ON CD-ROM |
ISO 13571:2012 | Life-threatening components of fire — Guidelines for the estimation of time to compromised tenability in fires |
ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
IEC TR 60695-7-2:2002 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
ISO 19706:2011 | Guidelines for assessing the fire threat to people |
ISO 19703:2010 | Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
IEC TS 60695-7-3:2004 | Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results |
ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
IEC 60695-1-11:2014 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
EN 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.