I.S. EN 415-7:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
Hardcopy , PDF
09-04-2008
English
09-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 Definition of terms
3.2 Description of group and secondary packaging
machines
3.2.1 Machines for erecting packaging materials
3.2.2 Product loading/unloading machines
3.2.3 Machines for sealing packages
3.2.4 Group package form, fill and seal machines
4 Hazards on group and secondary packaging machines
4.1 General
4.2 General group and secondary packaging machine hazards
4.2.1 General
4.2.2 Mechanical hazards
4.2.3 Electrical hazards
4.2.4 Thermal hazards
4.2.5 Noise
4.2.6 Hazards from products and materials
4.2.7 Hazards due to neglecting ergonomic principles
4.2.8 Hazards caused by failures
4.2.9 Hazards due to neglecting hygienic design
principles
4.2.10 Common mechanisms on group and secondary
packaging machines
4.3 Hazards associated with a tray erecting machine
4.3.1 General
4.3.2 Tray blank magazine
4.3.3 Tray blank extracting mechanism
4.3.4 Tray blank transport mechanism
4.3.5 Forming assembly
4.3.6 Discharge mechanism
4.4 Hazards associated with case erecting machines
4.4.1 General
4.4.2 Hazards associated with a semi-automatic
case erector
4.4.3 Hazards associated with a fully automatic
case erector
4.5 Hazards associated with a place packing machine
4.5.1 General
4.5.2 In-feed conveyor
4.5.3 Product collating mechanisms
4.5.4 Transport mechanism
4.5.5 Product loading mechanism
4.6 Hazards associated with a horizontal case loading
machine
4.6.1 General
4.6.2 Product in-feed conveyor
4.6.3 Product turning devices
4.6.4 Product collating mechanism
4.6.5 Case loading mechanism
4.6.6 Case funnel
4.6.7 Case support arms
4.6.8 Discharge conveyor
4.7 Hazards associated with case taping machines
4.7.1 General
4.7.2 Hazards associated with a manually adjusted
case taping machine without flap tucking
4.7.3 Hazards associated with a self adjusting case
taping machine without flap tucking
4.7.4 Hazards associated with a manually adjusted case
taping machine with flap tucking
4.7.5 Hazards associated with a fully automatic case
taping machine
4.8 Hazards associated with a wraparound case packing machine
4.8.1 General
4.8.2 Case blank magazine
4.8.3 Product in-feed conveyor
4.8.4 Transport mechanism
4.8.5 Case erecting mechanism
4.8.6 Product loading mechanism
4.8.7 Flap tucking mechanisms
4.8.8 Case closing devices
4.8.9 Case compression
4.8.10 Discharge conveyor
5 Safety requirements and measures for group and secondary
packaging machines
5.1 General
5.2 General requirements for group and secondary packaging
machines
5.2.1 General
5.2.2 Requirements to eliminate mechanical hazards
5.2.3 Electrical requirements
5.2.4 Thermal hazards
5.2.5 Noise reduction
5.2.6 Measures to control hazards generated by products
and materials
5.2.7 Ergonomic design principles
5.2.8 Requirements to prevent hazards caused by failures
5.2.9 Hygienic design requirements
5.2.10 Requirements for mechanisms used on most group
5.3 Safety requirements for a tray erecting machine
5.3.1 General
5.3.2 Tray blank magazine
5.3.3 Tray blank extracting mechanism
5.3.4 Tray blank transport mechanism
5.3.5 Forming assembly
5.3.6 Discharge mechanism
5.4 Safety requirements for a case erecting machine
5.4.1 Safety requirements for a semi-automatic
case erector
5.4.2 Safety requirements for a fully automatic
case erector
5.5 Safety requirements for a place packing machine
5.5.1 General
5.5.2 In-feed conveyor
5.5.3 Product collating mechanisms
5.5.4 Transport mechanism
5.5.5 Product loading mechanism
5.6 Safety requirements for a horizontal case loading
machine
5.6.1 General
5.6.2 In-feed conveyor
5.6.3 Product turning devices
5.6.4 Product stacking mechanism
5.6.5 Case loading mechanism
5.6.6 Case funnel
5.6.7 Case support arms
5.6.8 Discharge conveyor
5.7 Safety requirements for case taping machines
5.7.1 Safety requirements for a manually adjusted
case taping machine without flap tucking
5.7.2 Safety requirements for a self adjusting case
taping machine without flap tucking
5.7.3 Safety requirements for a manually adjusted
case taping machine with flap tucking
5.7.4 Safety requirements for a fully automatic case
taping machine
5.7.5 Noise reduction
5.8 Safety requirements for a wraparound case packing
machine
5.8.1 General
5.8.2 Case blank magazine
5.8.3 In-feed conveyor
5.8.4 Transport mechanism
5.8.5 Case erecting mechanism
5.8.6 Product loading mechanism
5.8.7 Flap tucking
5.8.8 Case closing devices
5.8.9 Case compression
5.8.10 Discharge conveyor
6 Verification of safety requirements and measures
6.1 General
6.2 Visual inspections with the machine stopped
6.2.1 Mechanical parts
6.2.2 Pneumatic systems
6.2.3 Hydraulic systems
6.2.4 Electrical systems
6.2.5 Guards
6.2.6 Design requirements
6.3 Measurements with the machine stopped
6.3.1 Guards
6.3.2 Electrical testing
6.4 Visual inspections with the machine running
6.4.1 Guards
6.4.2 Interlocking devices
6.4.3 Dissipation of stored energy
6.5 Measurements with the machine running
6.5.1 Measurement and declaration of noise emission
6.5.2 Temperature
6.6 Verification procedures
7 Information for use
7.1 Markings
7.2 Signals and warning signs
7.3 Instruction handbook
7.3.1 General
7.3.2 Requirements specific to group and secondary
packaging machines
Annex A (normative) Noise test code for group and secondary
packaging machines - grade of accuracy 2 and 3
Annex B (normative) Methods of safeguarding small and medium
sized apertures
Annex C (normative) Methods of safeguarding large apertures
Annex D (normative) ESPE Muting
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Applies to the group and secondary packaging machines and the collating systems associated with them.
| DevelopmentNote |
2006 Edition Re-Issued in September 2008 & incorporates AMD 1 2008. (09/2008)
|
| DocumentType |
Standard
|
| Pages |
107
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| BS EN 415-7 : 2006 | Identical |
| NF EN 415-7 : 2006 + A1 2008 | Identical |
| NS EN 415-7 : 2006 + A1 2008 | Identical |
| NEN EN 415-7 : 2006 + A1 2008 | Identical |
| DIN EN 415-7:2009-12 | Identical |
| EN 415-7:2006+A1:2008 | Identical |
| NBN EN 415-7 : 2006 + A1 2008 | Identical |
| UNI EN 415-7 : 2008 | Identical |
| SN EN 415-7 : 2006 + A1 2008 | Identical |
| UNE-EN 415-7:2007 | Identical |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 60417-1:2002 | Graphical symbols for use on equipment - Part 1: Overview and application |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 415-2:1999 | Packaging machines safety - Part 2: Pre-formed rigid container packaging machines |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 61310-3:2008 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 626-2:1996+A1:2008 | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
| CLC/TS 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN 415-3:1999+A1:2009 | Safety of packaging machines - Part 3: Form, fill and seal machines |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN 775:1992/AC:1993 | MANIPULATING INDUSTRIAL ROBOTS - SAFETY |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN 415-1:2014 | Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.