I.S. EN 14035-31:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
Hardcopy , PDF
10-04-2010
I.S. EN 15947-5:2010
I.S. EN 15947-3:2010
I.S. EN 15947-4:2010
I.S. EN 15947-5:2015
I.S. EN 15947-4:2015
I.S. EN 15947-3:2015
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Means of ignition
4.2 Attachment of initial fuse
4.3 Protection of initial fuse
4.4 Transmitting fuse
4.5 Materials of mortar and shell case
4.6 Integrity
4.7 Propellant charge
4.8 Location of the shell
4.9 Calibre
4.10 Gross mass
4.11 Net explosive content
4.12 Mass of report and/or bursting charge
4.13 Vertical stability
5 Performance
5.1 Initial fuse
5.2 Principal effects
5.3 Functioning
5.4 Sound pressure level
5.5 Height of explosions
5.6 Burning matter
5.7 Stability
5.8 Integrity of the firework case after functioning
6 Minimum labelling requirements
6.1 General
6.2 Type name and category
6.3 Safety information
6.3.1 General
6.3.2 Shell-in-mortars
6.3.3 Placing instructions
6.4 Name, address and telephone number of
manufacturer or distributor or importer
6.5 Reference to this document
6.6 Printing
6.6.1 Labelling
6.6.2 Type size
7 Test methods
7.1 Determination of gross mass (type test)
7.1.1 Apparatus
7.1.2 Procedure
7.2 Determination of calibre and enclosure of
propellant charge (type test)
7.2.1 Apparatus
7.2.2 Procedure
7.3 Determination of the location of the shell
(type test and batch test)
7.3.1 Apparatus
7.3.2 Procedure
7.4 Attachment of initial fuse (type test and batch test)
7.4.1 Apparatus
7.4.2 Procedure
7.5 Vertical stability test, if applicable (type test)
7.5.1 Apparatus
7.5.2 Procedure
7.6 Performance (type test and batch test)
7.6.1 Test environment
7.6.2 Apparatus
7.6.3 Procedure
7.7 Determination of net explosive content and
mass of report and/or bursting charge (type
test)
7.7.1 Apparatus
7.7.2 Test specimen
7.7.3 Procedure
7.8 Labelling (type test and batch test)
Annex A (normative) Type testing
A.1 General
A.2 Number of shell-in-mortars to be tested
A.3 Loose pyrotechnic composition
A.4 Thermal conditioning
A.5 Mechanical conditioning
A.5.1 Apparatus
A.5.2 Procedure
A.6 Test report
Annex B (normative) Batch testing
B.1 General
B.2 Sampling plans
B.3 Unit of product
B.4 Nonconformity
B.5 Test report
B.6 Acceptance or rejection of a batch
B.6.1 Nonconforming units
B.6.2 Critical nonconforming units
B.6.3 Major nonconforming units
B.6.4 Minor nonconforming units
Annex C (informative) A-Deviations
Defines requirements for the construction, performance and labelling of shell-in-mortars and the corresponding test methods.
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 14035-31:2005 | Identical |
| EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| ISO 3599:1976 | Vernier callipers reading to 0,1 and 0,05 mm |
| ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.