I.S. EN 1386:2007
Current
The latest, up-to-date edition.
ALUMINIUM AND ALUMINIUM ALLOYS - TREAD PLATE - SPECIFICATIONS
Hardcopy , PDF
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pattern types
5 Selection of materials
6 Order information
7 Requirements
7.1 General
7.2 Technical conditions for inspection and delivery
7.3 Surface conditions
7.4 Mechanical properties
7.5 Bend test
7.6 Exfoliation corrosion resistance and intergranular
corrosion (5xxx series alloys)
7.7 Tolerances on dimensions and form
7.8 Straightness of the longitudinal edge
7.9 Flatness
7.10 Squareness
8 Inspection and test procedures
8.1 Inspections and tests to be carried out
8.2 Type and content of inspection documents
9 Quality assurance
10 Marking and/or labelling
11 Arbitration
Annex A (normative) Rules for rounding
Annex B (informative) Explanation of temper designation used
in Table 1 based on definitions of EN 515
Bibliography
Defines the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for floor plating, e.g. in vehicle construction, shipbuilding and metallic structures with a raised pattern on one side and a smooth surface on the other side.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 1386:2007 | Identical |
| NF EN 1386 : 2007 | Identical |
| SN EN 1386 : 2007 | Identical |
| EN 1386:2007 | Identical |
| UNI EN 1386 : 2007 | Identical |
| UNE-EN 1386:2008 | Identical |
| NS EN 1386 : 2ED 2007 | Identical |
| NBN EN 1386 : 2007 | Identical |
| NEN EN 1386 : 2007 | Identical |
| DIN EN 1386:2008-05 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| ASTM G 67 : 2013 | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| ISO 7438:2016 | Metallic materials Bend test |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| ASTM G 66 : 1999 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.