I.S. EN 13053:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
Hardcopy , PDF
01-09-2020
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Ratings and performance of the entire air handling unit
6 Ratings and performance of the entire air handling unit
7 Extended hygiene requirements for special applications
8 Instructions for installation, operation and maintenance
Annex A (informative) - Air handling units - Heat recovery
- Defrosting - Requirements and testing
Annex B (informative) - Air handling units - Heat recovery
- Characteristics
Bibliography
Describes requirements and testing for ratings and performance of air handling units as a whole. Also specifies requirements, recommendations, classification, and testing of specific components and sections of air handling units.
| DevelopmentNote |
2006 Edition Re-Issued in July 2011 & incorporates AMD 1 2011. (07/2011)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 13053 : 2007 + A1 2011 | Identical |
| EN 13053:2006+A1:2011 | Identical |
| NS EN 13053 : 2006 + A1 2011 | Identical |
| SN EN 13053 : 2006 + A1 2011 | Identical |
| UNI EN 13053 : 2011 | Identical |
| BS EN 13053 : 2006 | Identical |
| NEN EN 13053 : 2006 + A1 2011 | Identical |
| NF EN 13053 : 2006 + A1 2011 | Identical |
| ONORM EN 13053 : 2011 | Identical |
| UNE-EN 13053:2007 | Identical |
| DIN EN 13053:2012-02 | Identical |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
| EN ISO 5136:2009 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 305:1997 | Heat exchangers - Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| IEC 60034-2:1972 | Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) |
| EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| EN 60034-2:1996/A2:1996 | ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY OF ROTATING ELECTRICAL MACHINERY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES) |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| ISO 5221:1984 | Air distribution and air diffusion Rules to methods of measuring air flow rate in an air handling duct |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| EN 13030:2001 | Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.