I.S. EN 12927-1:2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
Hardcopy , PDF
11-30-2019
English
12-17-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Safety principle
5.1 General
5.2 Hazard scenarios
5.3 Safety measures
6 Safety requirements
6.1 Ropes
6.2 End fixings
Table 1 - Rope selection criteria
Table 1 (end)
Table 2 - End fixings selection criteria
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2000/9/EC relating to cableway
installations designed to carry persons
Table ZA - Correspondence between this European Standard and
Directive 2000/9/EC relating to cableway installations
designed to carry persons
Outlines the safety requirements applicable to the selection criteria for ropes and their end fixings for installations for passenger transportation by rope.
DocumentType |
Standard
|
Pages |
13
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
NEN EN 12927-1 : 2004 | Identical |
UNE-EN 12927-1:2005 | Identical |
UNI EN 12927-1 : 2005 | Identical |
BS EN 12927-1:2004 | Identical |
NS EN 12927-1 : 1ED 2005 | Identical |
DIN EN 12927-1:2005-06 | Identical |
SN EN 12927-1 : 2005 | Identical |
NF EN 12927-1 : 2004 | Identical |
EN 12927-1:2004 | Identical |
NBN EN 12927-1 : 2004 | Identical |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
PREN 1907 : DRAFT 2014 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY |
EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
PREN 13796-2 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
EN 1492-4:2004+A1:2008 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
EN 12385-8:2002 | Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
PREN 13796-3 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING |
EN 12385-9:2002 | Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.