I.S. EN 1097-2:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
Hardcopy , PDF
05-13-2020
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Apparatus
5 Determination of resistance to fragmentation by the Los
Angeles test method
6 Determination of resistance to fragmentation by the impact
test method
Annex A (normative) - Determination of the resistance to
fragmentation of aggregates for railway ballast
Annex B (informative) - Alternative narrow range classifications
for the Los Angeles test
Annex C (informative) - The impact tester: Construction, operation
and safety requirements
Annex D (informative) - Checking of the impact tester
Annex E (informative) - Precision
Annex F (informative) - Worked example of calculation of impact
value SZ
Annex G (informative) - Alternative narrow range classification for
the Los Angeles test of 16/32 mm recycled aggregates
Bibliography
Pertains to natural, manufactured or recycled aggregates used in building and civil engineering.
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 1097-2 : 2010 | Identical |
| UNE-EN 1097-2:2010 | Identical |
| NF EN 1097-2 : 2010 | Identical |
| EN 1097-2:2010 | Identical |
| SN EN 1097-2 : 2010 | Identical |
| NBN EN 1097-2 : 2010 | Identical |
| DIN EN 1097-2:2016-07 (Draft) | Identical |
| NS EN 1097-2 : 2010 | Identical |
| BS EN 1097-2:2010 | Identical |
| UNI EN 1097-2 : 2010 | Identical |
| NEN EN 1097-2 : 2010 | Identical |
| S.R. 21:2014 | GUIDANCE ON THE USE OF I.S. EN 13242:2002 +A1:2007 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| S.R. 24:2004 | GUIDANCE ON THE USE AND APPLICATION OF EUROPEAN TEST METHOD STANDARDS FOR AGGREGATES |
| S.R. 16:2016 | GUIDANCE ON THE USE OF I.S. EN 12620:2002+A1:2008 - AGGREGATES FOR CONCRETE |
| S.R. 17:2004 | GUIDANCE ON THE USE OF I.S. EN 13043:2002 - AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| S.R. 61:2018 | GUIDANCE ON THE USE OF I.S. EN 12271:2006 SURFACE DRESSING - REQUIREMENTS |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| DIN 52115-2:2014-02 | TEST METHODS FOR AGGREGATES - PART 2: IMPACT TEST ON CRUSHED AND BROKEN AGGREGATES LARGER THAN 32 MM |
| ISO 1874-1:2010 | Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 4957:1999 | Tool steels |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| ISO 4762:2004 | Hexagon socket head cap screws |
| ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| ISO 185:2005 | Grey cast irons Classification |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
| EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.