I.S. EN 1011-6:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING
Hardcopy , PDF
01-10-2019
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms and definitions
4 Health and safety and protection of the environment
5 Quality requirements
6 Equipment
6.1 General
6.2 Provisions for acceptance testing
6.3 Provisions for maintenance and calibration
7 Qualification of welding personnel
8 Welding procedure specification
9 Welding procedure test
10 Consumables
10.1 Filler metals
10.2 Gases
11 Design
11.1 Overall design of structure or product
11.2 Joint design
11.3 Joint preparation
12 Laser beam welding
12.1 Characteristics
12.2 Advantages and limitations
12.3 Assembling and fixtures
12.4 Process control
12.5 Inspection and testing
12.6 Imperfections
Annex A (informative) Equipment
A.1 Description of laser process
A.2 Laser beam sources
A.3 Guiding, shaping and focusing the beam
A.4 Devices used to create a relative movement between the
laser beam and the work piece
A.5 Fixtures used to hold the work piece
A.6 Cooling systems
A.7 Control systems
Annex B (informative) Laser beam properties
Annex C (informative) Information about weldability of metallic
materials
C.1 General
C.2 Steels and iron alloys
C.3 Nickel alloys
C.4 Aluminium and magnesium alloys
C.5 Copper and its alloys
C.6 Refractory and reactive metals
C.7 Titanium and its alloys
C.8 Dissimilar metal
C.9 Non-metals
Annex D (informative) Information about causes of weld
imperfections and prevention
Annex E (informative) Beam control and monitoring
E.1 General
E.2 Focus point
E.3 Beam alignment and pilot beam coincidence
E.4 Beam power
E.5 Beam power distribution
E.6 Nozzle alignment
E.7 Pulsed beam power data
E.8 Manipulators, guides etc.
Annex F (informative) Laser beam processing
F.1 Laser beam cutting
F.2 Laser beam drilling
F.3 Laser beam surface treatment
F.4 Laser beam cladding characteristics
F.5 Laser beam marking and engraving
Bibliography
Defines general guidance for laser beam welding and associated processes of metallic materials in all forms of product.
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 1011-6:2006 | Identical |
| NF EN 1011-6 : 2006 | Identical |
| BS EN 1011-6:2005 | Identical |
| NBN EN 1011-6 : 2006 | Identical |
| NS EN 1011-6 : 1ED 2006 | Identical |
| ONORM EN 1011-6 : 2006 | Identical |
| UNI EN 1011-6 : 2006 | Identical |
| SN EN 1011-6 : 2006 | Identical |
| NEN EN 1011-6 : 2006 | Identical |
| DIN EN 1011-6:2006-03 | Identical |
| EN 1011-6:2005 | Identical |
| EN ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN 12073 : 1999 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR METAL ARC WELDING WITH OR WITHOUT A GAS SHIELD OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| EN ISO 11553-1:2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
| EN 20286-2 : 1993 | ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| EN ISO 22827-1:2005 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005) |
| EN ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| EN 12070 : 1999 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| EN 439 : 1994 | WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING |
| EN ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| EN 440 : 1994 | WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| ISO 13920:1996 | Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| ISO 13919-1:1996 | Welding Electron and laser-beam welded joints Guidance on quality levels for imperfections Part 1: Steel |
| ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
| ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| ISO 13694:2015 | Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| CR ISO 15608 : 2000 | WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM |
| ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| ISO 10218:1992 | Manipulating industrial robots Safety |
| EN 12535 : 2000 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| EN 12071 : 1999 | WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| ISO 18273:2015 | Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification |
| ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
| ISO 18274:2010 | Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification |
| EN ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
| EN ISO 18274:2010 | Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010) |
| EN ISO 13919-1:1996 | Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
| EN ISO 13920:1996 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN 14640:2005 | Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification |
| EN ISO 18273:2015 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015) |
| EN 12072 : 1999 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| EN ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
| ISO 22827-1:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 2: Moving mechanism |
| EN ISO 14919:2015 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
| EN ISO 11145:2016 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) |
| EN 1668 : 1997 | WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions |
| EN ISO 13694:2015 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2015) |
| EN ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
| EN 758 : 1997 | WELDING CONSUMABLES - TUBULAR COVERED ELECTRODES FOR METAL ARC WELDING WITH AND WITHOUT A GAS SHIELD OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
| EN ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005) |
| EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| EN 775:1992/AC:1993 | MANIPULATING INDUSTRIAL ROBOTS - SAFETY |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
| ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure |
| EN 1274:2004 | Thermal spraying - Powders - Composition, technical supply conditions |
| ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
| ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
| EN 12534 : 1999 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
| ISO 13919-2:2001 | Welding Electron and laser beam welded joints Guidance on quality levels for imperfections Part 2: Aluminium and its weldable alloys |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.