EN ISO 14120:2015
Current
Current
The latest, up-to-date edition.
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
Published date
11-18-2015
Publisher
Sorry this product is not available in your region.
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Risk assessment
5 General requirements for the design and
construction of guards
6 Selection of types of guards
7 Verification of the safety requirements for guards
8 Information for use
Annex A (informative) - Example of retained fastening
Annex B (informative) - Example of projectile test method
for mechanically testing guards
Annex C (informative) - Example of pendulum test method
for mechanically testing guards
Annex D (informative) - Relationship between International
Standards referenced in Clause 2 and corresponding
European Standards
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
ISO 14120:2015 specifies general requirements for the design, construction, and selection of guards provided to protect persons from mechanical hazards.ISO 14120:2015 indicates other hazards that can influence the design and construction of guards.ISO 14120:2015 applies to guards for machinery which will be manufactured after it is published.The requirements are applicable if fixed and movable guards are used. This International Standard does not cover interlocking devices. These are covered in ISO 14119.ISO 14120:2015 does not provide requirements for special systems relating specifically to mobility such as ROPS (rollover protective structures), FOPS (falling-object protective structures), and TOPS (tip over protective structures) or to the ability of machinery to lift loads.
| Committee |
CEN/TC 114
|
| DevelopmentNote |
Supersedes EN 953. (12/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 14120:2016 | Identical |
| NS EN ISO 14120 : 2015 | Identical |
| SS-EN ISO 14120:2015 | Identical |
| I.S. EN ISO 14120:2015 | Identical |
| PN EN ISO 14120 : 2016 | Identical |
| NBN EN ISO 14120 : 2015 | Identical |
| SN EN ISO 14120:2016 | Identical |
| DIN EN ISO 14120:2016-05 | Identical |
| ISO 14120:2015 | Identical |
| UNI EN ISO 14120 : 2015 | Identical |
| BS EN ISO 14120:2015 | Identical |
| NEN EN ISO 14120 : 2015 | Identical |
| NF EN ISO 14120 : 2016 | Identical |
| PREN 16307-2 : DRAFT 2017 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE-REACH TRUCKS |
| UNE-EN 16851:2017 | Cranes - Light crane systems |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 378-2:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| 17/30354108 DC : 0 | BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 17/30362886 DC : 0 | BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS |
| 17/30364328 DC : 0 | BS EN 1009-5 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 609-1:2010-07 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| UNE-EN 378-2:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| UNE-EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| PREN 81-40 : DRAFT 2017 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| PREN 16712-4 : DRAFT 2017 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIREFIGHTING PUMPS - PORTABLE FOAM GENERATORS - PART 4: HIGH EXPANSION FOAM GENERATORS PN 16 |
| 17/30351975 DC : DRAFT AUG 2017 | BS EN 17088 - SIDE CURTAINS VENTILATION SYSTEMS - SAFETY |
| DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN 609-1:2017 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| DIN EN 609-1:2017-04 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| PREN 13379 : DRAFT 2016 | PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 1570-2:2016 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| 16/30338566 DC : 2016-06 | BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| 17/30364300 DC : 0 | BS EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| PREN 1009-5 : DRAFT 2017 | MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY |
| DIN EN 1570-2:2014-06 (Draft) | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 1570-2:2017 | Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| BS EN 16851:2017 | Cranes. Light crane systems |
| PREN 13525 : DRAFT 2016 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
| BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
| DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
| BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS EN 378-2:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
| EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| 17/30364322 DC : 0 | BS EN 16307-2 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE REACH TRUCKS |
| BS EN 1570-2:2016 | Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| 16/30337481 DC : 0 | BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| 17/30364332 DC : 0 | BS EN 1009-2 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR FEEDING MACHINERY AND CONTINUOUS HANDLING EQUIPMENT |
| 17/30364325 DC : 0 | BS EN 1009-4 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR SCREENING MACHINERY |
| BS EN 609-1:2017 | Agricultural and forestry machinery. Safety of log splitters Wedge splitters |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 1570-2:2017-03 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| DIN EN 16851:2017-06 | Cranes - Light crane systems |
| NS-EN 16005:2023 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 14159:2002 | Safety of machinery — Hygiene requirements for the design of machinery |
| ISO 11429:1996 | Ergonomics — System of auditory and visual danger and information signals |
| ISO 11428:1996 | Ergonomics Visual danger signals General requirements, design and testing |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| ISO 25980:2014 | Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes |
| IEC TR 61340-1:2012 | Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements |
| ISO 19353:2015 | Safety of machinery Fire prevention and fire protection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.