EN 340:2003
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Protective clothing - General requirements
Superseded date
07-01-2013
Superseded by
Published date
12-17-2003
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basic health and ergonomic requirements
4.1 General
4.2 Innocuousness
4.3 Design
4.4 Comfort
5 Ageing
5.1 General
5.2 Colour fastness
5.3 Dimensional change due to cleaning
5.4 Washing and dry cleaning methods
6 Size designation
7 Marking
7.1 General marking
7.2 Specific marking
8 Information supplied by the manufacturer
Annex A (informative) Performance level
Annex B (informative) Flow chart
Annex C (informative) Checking the ergonomic features of
protective clothing (Practical performance tests)
C.1 General
C.2 Principle
C.3 Assessment questions
C.4 Grounds for concluding a product in unacceptable
Annex D (informative)
Examples of size designation
D.1 Examples of size designation for suits, jackets, coats
and trousers
D.2 Example of size designation for torso protector
Annex E (normative) Pictograms
Annex ZA (informative) Clauses of this European Standard addressing
essential requirements or other provision of EU Directives
Bibliography
This European Standard specifies general requirements for ergonomics, ageing, sizing, marking of protective clothing and for information supplied by the manufacture.
| Committee |
CEN/TC 162
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PN EN 340 : 2006 | Identical |
| UNI EN 340 : 2004 | Identical |
| NS EN 340 : 2ED 2004 | Identical |
| NBN EN 340 : 2004 | Identical |
| AS/NZS 4501.2:2006 | Identical |
| NF EN 340 : 2004 | Identical |
| UNE-EN 340:2004 | Identical |
| BS EN 340:2003 | Identical |
| NEN EN 340 : 2004 | Identical |
| SN EN 340 : 2004 | Identical |
| I.S. EN 340:2004 | Identical |
| GOST EN 340 : 2012 | Identical |
| GOST R EN 340 : 2010 | Identical |
| DIN EN 340:2004-03 | Identical |
| BS EN 343 : 2003 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| BS EN ISO 17491-3:2008 | Protective clothing. Test methods for clothing providing protection against chemicals Determination of resistance to penetration by a jet of liquid (jet test) |
| 12/30265282 DC : 0 | BS EN 16471 - FIREFIGHTERS HELMETS - HELMETS FOR WILDLAND FIRE FIGHTING |
| BS EN 50286:2001 | Electrical insulating protective clothing for low-voltage installations |
| I.S. EN ISO 13998:2003 | PROTECTIVE CLOTHING - APRONS, TROUSERS AND VESTS PROTECTING AGAINST CUTS AND STABS BY HAND KNIVES |
| UNI EN 13158 : 2009 | PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE: FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1150:1999 | PROTECTIVE CLOTHING - VISIBILITY CLOTHING FOR NON-PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| BS EN ISO 17491-4 : 2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008) |
| DIN EN 1149-5:2008-04 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
| 14/30293500 DC : 0 | BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
| 01/560923 DC : DRAFT FEB 2001 | BS EN 14126 - PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS |
| 06/30156009 DC : DRAFT SEP 2006 | BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES |
| 10/30196552 DC : 0 | BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| 01/562170 DC : DRAFT MAY 2001 | BS EN 1149-3 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 3: TEST METHODS FOR MEASUREMENT OF CHARGE DECAY |
| I.S. EN 16027:2011 | PROTECTIVE CLOTHING - GLOVES WITH PROTECTIVE EFFECT FOR ASSOCIATION FOOTBALL GOAL KEEPERS |
| PREN 14126 : DRAFT 2001 | PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS |
| 10/30216633 DC : 0 | BS EN 1621-1 - MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
| 12/30266576 DC : 0 | BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| DIN EN ISO 17491-4:2016-09 | Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008 + Amd. 1:2016) (includes Amendment A1:2016) |
| 11/30235982 DC : 0 | BS EN 469 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| 05/30126523 DC : 0 | EN 1149-5 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: PERFORMANCE REQUIREMENTS |
| PREN 14225-2 : DRAFT 2014 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 343:2003 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| I.S. CEN TS 15256:2005 | PROTECTIVE CLOTHING - HAND, ARM, LEG, GENITAL AND NECK PROTECTORS FOR USE IN ICE HOCKEY - PROTECTORS FOR PLAYERS OTHER THAN GOALKEEPERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1149-5:2008 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
| PD 6632:1998 | Biotechnology. Laboratories for research, development and analysis. Guidance on the selection of equipment needed for biotechnology laboratories according to the degree of hazard |
| UNI EN 343 : 2008 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| DIN EN 13567:2007-09 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| NF EN 13034 : 2005 + A1 2009 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT) |
| DIN EN 1621-1:2013-03 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 15027-3:2012 | Immersion suits Test methods |
| BS EN ISO 13982-2:2004 | Protective clothing for use against solid particulates Test method of determination of inward leakage of aerosols of fine particles into suits |
| ISO 11553-2:2007 | Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices |
| BS EN 1149-3:2004 | Protective clothing. Electrostatic properties Test methods for measurement of charge decay |
| BS EN 14605 : 2005 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| BS EN 13595-1:2002 | Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits General requirements |
| BS EN 12307:1998 | Biotechnology. Large-scale process and production. Guidance for good practice, procedures, training and control for personnel |
| BS EN 14021:2003 | Stone shields for off-road motorcycling suited to protect riders against stones and debris. Requirements and test methods |
| BS EN 14404 : 2004 | PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION |
| BS EN 1486:2007 | Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting |
| EN 1150:1999 | Protective clothing - Visibility clothing for non-professional use - Test methods and requirements |
| EN 12307:1997 | Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel |
| EN 13034:2005+A1:2009 | Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
| EN 50286:1999/corrigendum:2004 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| EN 13546:2002+A1:2007 | Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods |
| DIN EN ISO 13982-2:2005-03 | Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
| EN 13567:2002+A1:2007 | Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
| EN 1082-3:2000 | Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials |
| BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
| PREN 943-1 : DRAFT 2011 | PROTECTIVE CLOTHING AGAINST SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 1: PERFORMANCE REQUIREMENTS FOR VENTILATED AND NON-VENTILATED 'GAS-TIGHT' (TYPE 1) SUITS |
| 14/30293494 DC : 0 | BS EN 14225-1 - DIVING SUITS - PART 1: WET SUITS - REQUIREMENTS AND TEST METHODS |
| BS EN 16027:2011 | Protective clothing. Gloves with protective effect for association football goal keepers |
| BS EN 1149-5:2008 | Protective clothing. Electrostatic properties Material performance and design requirements |
| BS EN 1621-4:2013 | Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' inflatable protectors. Requirements and test methods |
| 12/30242785 DC : 0 | BS EN 61331-3 - PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - PART 3: PROTECTIVE CLOTHING, EYEWEAR AND PROTECTIVE PATIENT SHIELDS |
| 00/565542 DC : DRAFT DEC 2000 | BS EN ISO 13982-1 PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATE CHEMICALS- PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROTECTION TO THE FULL BODY AGAINST SOLID PARTICULATE CHEMICALS (TYPE 5 CLOTHING) |
| PD CEN/TR 15321:2006 | Guidelines on the selection, use, care and maintenance of protective clothing |
| PREN 1621-1 : DRAFT 2010 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 15419:2006 | PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING |
| S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
| I.S. EN 15613:2008 | KNEE AND ELBOW PROTECTORS FOR INDOOR SPORTS - SAFETY REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 16149:2011 | GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS |
| DIN EN 13034:2009-08 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB[6] EQUIPMENT) |
| DIN EN 14225-4:2005-08 | DIVING SUITS - PART 4: ONE ATMOSPHERE SUITS (ADS) - HUMAN FACTORS REQUIREMENTS AND TEST METHODS |
| DIN EN 14404:2010-05 | Personal protective equipment - Knee protectors for work in the kneeling position (includes Amendment A1:2010) |
| I.S. EN 381-11:2002 | PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 11: REQUIREMENTS FOR UPPER BODY PROTECTORS |
| BS EN 13034 : 2005 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT) |
| BS EN 470-1:1995 | Protective clothing for use in welding and allied processes General requirements |
| BS EN 1150:1999 | Protective clothing. Visibility clothing for non-professional use. Test methods and requirements |
| BS EN 14225-4:2005 | Diving suits One atmosphere suits (ADS). Human factors requirements and test methods |
| BS EN 533:1997 | Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies |
| BS EN 471 : 2003 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| BS EN 467:1995 | Protective clothing. Protection against liquid chemicals. Performance requirements for garments providing protection to parts of the body |
| ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
| BS EN 15614:2007 | Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing |
| I.S. EN 14126:2003+AC:2004 | PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS |
| ISO 13998:2003 | Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives |
| BS EN 13567 : 2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| BS EN 14328:2005 | Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods |
| UNE-EN 61331-3:2015 | Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing, eyewear and protective patient shields |
| I.S. EN 1486:2007 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| I.S. EN ISO 15027-1:2012 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-1:2012) |
| I.S. EN 443:2008 | HELMETS FOR FIRE FIGHTING IN BUILDINGS AND OTHER STRUCTURES |
| I.S. EN 1149-1:2006 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 1: TEST METHOD FOR MEASUREMENT OF SURFACE RESISTIVITY |
| I.S. EN 13034:2005 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT) |
| I.S. EN 13546:2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS, AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15027-2:2012 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-2:2012) |
| I.S. EN 14404:2004 | PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION |
| I.S. EN 1621-1:2012 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14225-4:2005 | DIVING SUITS - PART 4: ONE ATMOSPHERE DIVING SUIT (ADS) - HUMAN FACTORS REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11553-2:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| I.S. EN 13567:2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15027-3:2012 | IMMERSION SUITS - PART 3: TEST METHODS (ISO 15027-3:2012) |
| I.S. EN 15614:2007 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR WILDLAND CLOTHING |
| VDI 6022 Blatt 7.1:2013-10 | Ventilation and indoor-air quality - Branch-specific guides - Waste treatment plants |
| I.S. EN 1621-4:2013 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 4: MOTORCYCLISTS' INFLATABLE PROTECTORS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1621-4:2013-04 | Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods |
| UNI EN 15613 : 2009 | KNEE AND ELBOW PROTECTORS FOR INDOOR SPORTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DD ENV 342:1998 | Protective clothing. Ensembles for protection against cold |
| 07/30158713 DC : 0 | BS EN 15613 - KNEE AND ELBOW PROTECTORS FOR INDOOR SPORTS - SAFETY REQUIREMENTS AND TEST METHODS |
| 01/562883 DC : DRAFT JUL 2001 | BS EN 14225-4 - DIVING SUITS - PART 4: ONE ATMOSPHERE DIVING SUIT - HUMAN FACTORS REQUIREMENTS AND TEST METHODS |
| UNE-EN 16027:2012 | Protective clothing - Gloves with protective effect for association football goal keepers |
| 12/30265285 DC : 0 | BS EN 16473 - FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE |
| 14/30293497 DC : 0 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| DIN EN 16027:2012-02 | PROTECTIVE CLOTHING - GLOVES WITH PROTECTIVE EFFECT FOR ASSOCIATION FOOTBALL GOAL KEEPERS |
| 04/30096910 DC : DRAFT OCT 2004 | ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES |
| 13/30282508 DC : 0 | BS EN 1073-1 - PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
| UNE-EN 1621-4:2013 | Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods |
| BS EN 15613:2008 | Knee and elbow protectors for indoor sports. Safety requirements and test methods |
| 00/562569 DC : DRAFT JUN 2000 | BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION |
| I.S. EN 50286:1999 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| I.S. CEN TR 15441:2006 | SOLID RECOVERED FUELS - GUIDELINES ON OCCUPATIONAL HEALTH ASPECTS |
| DIN EN 1486:2008-04 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| DIN EN 471:2008-03 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| DIN EN ISO 15027-3:2013-03 | Immersion suits - Part 3: Test methods (ISO 15027-3:2012) |
| DIN EN ISO 11553-2:2009-03 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| UNE-EN ISO 15027-1:2013 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| BS EN 1621-1:2012 | Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' limb joint impact protectors. Requirements and test methods |
| UNE-EN 1621-1:2013 | Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods |
| EN 60895:2003 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| EN 381-11:2002 | Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors |
| UNI EN ISO 15027-1 : 2012 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNI EN 1621-1 : 2013 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS |
| UNI EN 471 : 2008 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| UNI EN ISO 13982-1 : 2011 | PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATES - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROVIDING PROTECTION TO THE FULL BODY AGAINST AIRBORNE SOLID PARTICULATES (TYPE 5 CLOTHING) |
| UNI EN 14404 : 2010 | PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION |
| UNI EN ISO 11553-2 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
| UNI EN ISO 15027-2 : 2012 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNI EN 14605 : 2009 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| UNI EN ISO 15027-3 : 2012 | IMMERSION SUITS - PART 3: TEST METHODS |
| UNI EN 1486 : 2008 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| UNI EN 13034 : 2009 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT) |
| UNI EN 443 : 2008 | HELMETS FOR FIRE FIGHTING IN BUILDINGS AND OTHER STRUCTURES |
| UNI EN ISO 17491-3 : 2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 3: DETERMINATION OF RESISTANCE TO PENETRATION BY A JET OF LIQUID (JET TEST) |
| UNI EN 16027 : 2012 | PROTECTIVE CLOTHING - GLOVES WITH PROTECTIVE EFFECT FOR ASSOCIATION FOOTBALL GOAL KEEPERS |
| 11/30253429 DC : 0 | BS EN 943-1 - PROTECTIVE CLOTHING AGAINST SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 1: PERFORMANCE REQUIREMENTS FOR VENTILATED AND NON-VENTILATED 'GAS-TIGHT' (TYPE 1) SUITS |
| I.S. EN 13595-1:2002 | PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE PIECE OR DIVIDED SUITS - PART 1: GENERAL REQUIREMENTS |
| 10/30196548 DC : 0 | BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| 10/30196555 DC : 0 | BS EN ISO 15027-3 - IMMERSION SUITS - PART 3: TEST METHODS |
| 01/561498 DC : 0 | BS ISO 11612 - PROTECTIVE CLOTHING - CLOTHING TO PROTECT AGAINST HEAT AND FLAME |
| 04/30112373 DC : DRAFT SEP 2004 | PREN 1149-1 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 1: TEST METHOD FOR MEASUREMENT OF SURFACE RESTIVITY |
| 03/100433 DC : DRAFT JAN 2003 | EN 14605 - PROTECTIVE CLOTHING FOR USE AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS BETWEEN PARTS OF THE CLOTHING, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY |
| 00/564562 DC : DRAFT SEP 2000 | BS EN 469 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| DIN EN ISO 17491-3:2008-12 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 3: DETERMINATION OF RESISTANCE TO PENETRATION BY A JET OF LIQUID (JET TEST) |
| 03/117128 DC : 0 | EN 1486 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| DIN EN 15613:2009-01 | KNEE AND ELBOW PROTECTORS FOR INDOOR SPORTS - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 14225-1 : DRAFT 2014 | DIVING SUITS - PART 1: WET SUITS - REQUIREMENTS AND TEST METHODS |
| 02/563070 DC : DRAFT JULY 2002 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS, REQUIREMENTS AND TEST METHODS |
| DD ENV 343:1998 | Protective clothing. Protection against foul weather |
| 12/30260499 DC : 0 | BS EN 16448-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS |
| PD CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| 01/562882 DC : DRAFT JUL 2001 | BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 15256:2005 | Protective clothing. Hand, arm, leg, genital and neck protectors for use in ice hockey. Protectors for players other than goalkeepers. Requirements and test methods |
| UNI EN 1621-4 : 2013 | MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 4: MOTORCYCLISTS' INFLATABLE PROTECTORS - REQUIREMENTS AND TEST METHODS |
| 06/30150354 DC : DRAFT MAY 2006 | BS EN ISO 17491-3 - PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 3: DETERMINATION OF RESISTANCE TO PENETRATION BY A JET OF LIQUID (JET TEST) |
| PREN ISO 15027-1 : DRAFT 2010 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| UNI EN 1149-5 : 2008 | PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS |
| PREN ISO 15027-3 : DRAFT 2010 | IMMERSION SUITS - PART 3: TEST METHODS |
| UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| DIN EN ISO 15027-2:2013-03 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| DIN EN 13546:2007-09 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS, AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 15027-1:2013-03 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| BS EN 381-10:2002 | Protective clothing for users of hand-held chain saws Test method for upper body protectors |
| ISO 13982-1:2004 | Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) |
| BS EN 14126:2003 | Protective clothing. Performance requirements and tests methods for protective clothing against infective agents |
| I.S. EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
| BS EN 465:1995 | Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (type 4 equipment) |
| BS EN 469:2014 | Protective clothing for firefighters. Performance requirements for protective clothing for firefighting |
| BS EN 1082-3:2000 | Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives Impact cut test for fabric, leather and other materials |
| BS EN ISO 13982-1 : 2004 | PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATES - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROVIDING PROTECTION TO THE FULL BODY AGAINST AIRBORNE SOLID PARTICULATES (TYPE 5 CLOTHING) |
| ISO 15027-3:2012 | Immersion suits Part 3: Test methods |
| ISO 15027-2:2012 | Immersion suits Part 2: Abandonment suits, requirements including safety |
| ISO 17491-4:2008 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) |
| ISO 14460:1999 | Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods |
| ISO 17491-3:2008 | Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) |
| ISO 13982-2:2004 | Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits |
| BS EN 1149-1:2006 | Protective clothing. Electrostatic properties Test method for measurement of surface resistivity |
| I.S. EN 381-10:2002 | PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - TEST METHODS FOR UPPER BODY PROTECTORS |
| BS EN ISO 11553-2:2008 | Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices |
| BS EN ISO 13998:2003 | Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives |
| ISO 15027-1:2012 | Immersion suits Part 1: Constant wear suits, requirements including safety |
| BS EN ISO 15027-1:2012 | Immersion suits Constant wear suits, requirements including safety |
| DIN EN 15614:2007-09 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR WILDLAND CLOTHING |
| BS EN 1073-2:2002 | Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| IEC 61331-3:2014 | Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing, eyewear and protective patient shields |
| BS EN ISO 14460:1999 | Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods |
| UNE-EN ISO 15027-3:2013 | Immersion suits - Part 3: Test methods (ISO 15027-3:2012) |
| BS EN 381-11:2002 | Protective clothing for users of hand-held chain saws Requirements for upper body protectors |
| DIN EN 1149-3:2004-07 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
| EN 16027:2011 | Protective clothing - Gloves with protective effect for association football goal keepers |
| EN 15613:2008 | Knee and elbow protectors for indoor sports - Safety requirements and test methods |
| EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
| EN 14021:2003 | Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
| EN 466:1995/A1:1998 | PROTECTIVE CLOTHING - PROTECTION AGAINST LIQUID CHEMICALS - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT CONNECTIONS BETWEEN DIFFERENT PARTS OF THE CLOTHING (TYPE 3 EQUIPMENT) |
| EN 465:1995/A1:1998 | PROTECTIVE CLOTHING - PROTECTION AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH SPRAY-TIGHT CONNECTIONS BETWEEN DIFFERENT PARTS OF THE CLOTHING |
| EN 13921:2007 | Personal protective equipment - Ergonomic principles |
| EN ISO 15027-1:2012 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
| EN 531:1995/A1:1998 | PROTECTIVE CLOTHING FOR INDUSTRIAL WORKERS EXPOSED TO HEAT |
| EN 533 : 1997 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS AND MATERIAL ASSEMBLIES |
| ENV 343 : 1998 | PROTECTIVE CLOTHING - PROTECTION AGAINST FOUL WEATHER |
| EN ISO 13998:2003 | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
| EN 13595-1:2002 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements |
| EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| EN 1621-1:2012 | Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods |
| EN ISO 11553-2:2008 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
| EN ISO 15027-2:2012 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| EN ISO 17491-3:2008 | Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
| EN 381-10:2002 | Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors |
| EN 14225-4:2005 | Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods |
| EN 467:1995/A1:1998 | PROTECTIVE CLOTHING - PROTECTION AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR GARMENTS PROVIDING PROTECTION TO PARTS OF THE BODY |
| EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
| EN 1621-4:2013 | Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods |
| EN 443:2008 | Helmets for fire fighting in buildings and other structures |
| EN 470-1:1995/A1:1998 | PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES - GENERAL REQUIREMENTS |
| EN 15614:2007 | Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing |
| EN ISO 13982-2:2004 | Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
| ENV 342 : 1998 | PROTECTIVE CLOTHING - ENSEMBLES FOR PROTECTION AGAINST COLD |
| EN 14328:2005 | Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods |
| EN 14404:2004+A1:2010 | Personal protective equipment - Knee protectors for work in the kneeling position |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| PREN 1073-1 : DRAFT 2013 | PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
| BS EN 466-1:1995 | Protective clothing. Protection against liquid chemicals Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (type 3 equipment) |
| 99/566215 DC : DRAFT NOV 1999 | PREN ISO 14876-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS |
| 07/30159048 DC : 0 | BS EN 13158 - PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE - FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS |
| 00/565179 DC : 0 | BS EN ISO 11611 - PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES |
| PREN 14225-3 : DRAFT 2014 | DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
| BS EN 61331-3:2014 | Protective devices against diagnostic medical X-radiation Protective clothing, eyewear and protective patient shields |
| NF EN 50286 : 2005 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| 96/542726 DC : DRAFT OCT 1996 | PREN ISO 14876-1 - BODY ARMOUR - PART 1: BULLET-RESISTANT VESTS |
| 96/542727 DC : DRAFT OCT 1996 | PREN ISO 14876-2 - BODY ARMOUR - PART 2: STAB-RESISTANT VESTS |
| 10/30200375 DC : 0 | BS EN ISO 20471 - HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| PREN ISO 15027-2 : DRAFT 2010 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| BS EN 60895:2003 | Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| I.S. EN ISO 17491-4:2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008) |
| I.S. EN 61331-3:2014 | PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - PART 3: PROTECTIVE CLOTHING, EYEWEAR AND PROTECTIVE PATIENT SHIELDS |
| NF EN 14225-1 : 2005 | DIVING SUITS - PART 1: WET SUITS - REQUIREMENTS AND TEST METHODS |
| I.S. CEN TR 15321:2006 | GUIDELINES ON THE SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING |
| EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
| I.S. EN ISO 17491-3:2008 | PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 3: DETERMINATION OF RESISTANCE TO PENETRATION BY A JET OF LIQUID (JET TEST) |
| DIN EN 14126:2004-01 | Protective clothing - Performance requirements and test methods for protective clothing against infective agents |
| BS EN 443:2008 | Helmets for fire fighting in buildings and other structures |
| BS EN 13921:2007 | Personal protective equipment. Ergonomic principles |
| BS EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
| UNE-EN ISO 15027-2:2013 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| BS EN 13546 : 2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
| BS EN 466 : 95 AMD 10429 | PROTECTIVE CLOTHING - PROTECTION AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT CONNECTIONS BETWEEN DIFFERENT PARTS OF THE CLOTHING (TYPE 3 EQUIPMENT) |
| BS EN ISO 15027-2:2012 | Immersion suits Abandonment suits, requirements including safety |
| EN 61331-3:2014 | Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing, eyewear and protective patient shields |
| EN ISO 15027-3 : 2012 COR 2012 | IMMERSION SUITS - PART 3: TEST METHODS (ISO 15027-3:2012) |
| CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| CEN/TR 15321:2006 | Guidelines on the selection, use, care and maintenance of protective clothing |
| DIN EN 443:2008-06 | Helmets for fire fighting in buildings and other structures |
| DIN EN 471:2003-12 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| CEN/TR 15441:2006 | Solid recovered fuels - Guidelines on occupational health aspects |
| DIN EN ISO 13982-1:2011-02 | Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004 + Amd. 1:2010) (includes Amendment A1:2010) |
| DIN EN 1149-1:2006-09 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| DIN EN 14021:2004-03 | Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| EN 1073-2:2002 | Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| CEN/TS 15256:2005 | Protective clothing - Hand, arm, leg, genital and neck protectors for use in ice hockey - Protectors for players other than goalkeepers - Requirements and test methods |
| DIN EN 14328:2005-07 | PROTECTIVE CLOTHING - GLOVES AND ARMGUARDS PROTECTING AGAINST CUTS BY POWERED KNIVES - REQUIREMENTS AND TEST METHODS |
| DIN EN 343:2010-05 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| DIN EN 14605:2009-08 | PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4]) |
| I.S. EN ISO 13982-1:2005 | PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATES - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROVIDING PROTECTION TO THE FULL BODY AGAINST AIRBORNE SOLID PARTICULATES (TYPE 5 CLOTHING) |
| DIN EN 13921:2007-08 | Personal protective equipment - Ergonomic principles |
| DIN EN ISO 13998:2003-05 | PROTECTIVE CLOTHING - APRONS, TROUSERS AND VESTS PROTECTING AGAINST CUTS AND STABS BY HAND KNIVES |
| NF EN 14404 : 2005 + A1 2010 | PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| ISO 4045:2008 | Leather Chemical tests Determination of pH |
| EN 13402-1:2001 | Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981 modified) |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| EN 25077 : 1993 | TEXTILES - DETERMINATION OF DIMENSIONAL CHANGE IN WASHING AND DRYING |
| EN ISO 4045:2008 | Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
| ISO 3175-1:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 1: Assessment of performance after cleaning and finishing |
| EN 1811:2011+A1:2015 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
| EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
| EN 13402-2:2002 | Size designation of clothes - Part 2: Primary and secondary dimensions |
| ISO 8559:1989 | Garment construction and anthropometric surveys Body dimensions |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| IEC 60300-3-9:1995 | Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
| PREN 13402-3 : DRAFT 2016 | SIZE DESIGNATION OF CLOTHES - PART 3: BODY MEASUREMENTS AND INTERVALS |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| EN 23758 : 1993 | TEXTILES - CARE LABELLING CODE USING SYMBOLS |
| PREN 14362-1 : DRAFT 2010 | TEXTILES - METHODS FOR DETERMINATION OF CERTAIN AROMATIC AMINES DERIVED FROM AZO COLORANTS - PART 1: DETECTION OF THE USE OF CERTAIN AZO COLORANTS ACCESSIBLE WITH AND WITHOUT EXTRACTING THE FIBRES |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
| EN 1413 : 1998 | TEXTILES - DETERMINATION OF PH OF AQUEOUS EXTRACT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.