EN 15114:2006+A1:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Textile floor coverings - Classification of textile floor coverings without pile
05-01-2014
09-10-2008
Foreword
1 Scope
2 Normative references
3 Identification requirements
4 Basic requirements
4.1 General
4.2 Levels of use & classification
4.2.1 General
4.2.2 Classification for change in appearance
4.2.3 Classification for wear
4.2.4 General structural integrity
5 Additional characteristics
6 Luxury rating classification
7 Report
8 Symbols
Annex A (normative) - Additional requirements for tiles
A.1 Scope
A.2 Definitions
A.3 Requirements
Annex B (normative) - Suitability for underfloor heating
Annex C (normative) - Colour change due to soiling subsequent
spilled water
Annex D (normative) - Suitability to stairs
Annex E (normative) - Summary test report
Bibliography
This European Standard specifies the requirements for the classification of textile floor coverings without pile into use classes in respect of wear and appearance retention, and classes for luxury rating. This standard is applicable to all textile floor coverings without pile that are not covered in other standards, including EN 1307, EN 1470 and EN 13297.This standard refers to the classification as defined in EN 685.This standard is also applicable to tiles, the additional requirements for which are given in Annex A.This standard is not applicable to rugs.The symbols for the use classes, luxury rating classes and additional characteristics are listed in CEN/TS 15398 and can also be found on www.floorsymbols.com .
Committee |
CEN/TC 134
|
DevelopmentNote |
2006 Edition Re-Issued in September 2008 & incorporates AMD 1 2008. (10/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NBN EN 15114 : 2006 + A1 2008 | Identical |
NF EN 15114 : 2007 + A1 2008 | Identical |
I.S. EN 15114:2006 | Identical |
PN EN 15114 : 2007 + A1 2008 | Identical |
SN EN 15114 : 2006 + A1 2008 | Identical |
DIN EN 15114:2008-11 | Identical |
NS EN 15114 : 2006 + A1 2008 | Identical |
UNE-EN 15114:2007 | Identical |
NEN EN 15114 : 2006 + A1 2008 | Identical |
UNI EN 15114 : 2008 | Identical |
DIN EN 15114 E : 2008 | Identical |
BS EN 15114 : 2006 | Identical |
UNE-EN 15114:2007+A1:2008 | Identical |
13/30287620 DC : DRAFT DEC 2013 | BS ISO 12951 - TEXTILE FLOOR COVERINGS - DETERMINATION OF MASS LOSS, FIBRE BIND AND STAIR NOSING APPEARANCE CHANGE USING THE LISSON TETRAD MACHINE |
DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
BS EN 1963:2007 | Textile floor coverings. Tests using the Lisson Tretrad machine |
DIN EN 1963:2007-07 | TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TRETRAD MACHINE |
DIN EN 1963:1998-01 | TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TRETRAD MACHINE |
I.S. EN 1963:2007 | TEXTILE FLOOR COVERINGS - TESTS USING THE LISSON TETRAD MACHINE |
11/30244187 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
ISO 2551:1981 | Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
EN 985:2001 | Textile floor coverings - Castor chair test |
ISO 10361:2015 | Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
EN ISO 717-2:2013 | Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013) |
EN 995:1995 | Textile floor coverings - Assessment of the creep of the backings |
CEN/TS 14159:2007 | Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
ISO 11378-2:2001 | Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
CEN/TS 14472-2:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings |
EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
ISO 2424:2007 | Textile floor coverings — Vocabulary |
ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
EN 685:2007 | Resilient, textile and laminate floor coverings - Classification |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.