EN 1374:2000+A1:2010
Current
The latest, up-to-date edition.
Agricultural machinery - Silos stationary unloaders for round silos - Safety
04-07-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Mechanical safety requirements
5 Electrical safety requirements
6 Information for use
Annex A (normative) List of hazards
Annex B (informative) Top-unloaders - Examples for design
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
This European Standard specifies safety requirements for the design and construction of unloaders mounted in stationary round silos for the removal of the silage and similar materials. It applies to electrically powered, slowly rotating unloaders which operate on top surface of the stored silage surface.It describes methods for the elimination or reduction of hazards for which specific requirements on unloaders, as defined in 3 and shown in Annex B, are necessary. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.The document only deals with the hazards generated by the silo unloader and not with those of the silo system itself (e.g. hazards arising from generated gases).This document is not applicable to noise and fire hazards and hazards related to the foreseeable misuse.The document does not deal with technical requirements for installation or removal of the unloader from one silo to another.The list of significant hazards dealt with in this document is given in annex A. Annex A also indicates the hazards which have not been dealt with.The environmental aspects have not been considered in this document.This document applies primarily to machines which are manufactured after the date of issue of this document.NOTEDirective 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present document is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.
| Committee |
CEN/TC 144
|
| DevelopmentNote |
2000 Edition Re-Issued in April 2010 & incorporates AMD 1 2010. (04/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 1374:2001 | Identical |
| SN EN 1374 : 2000 + A1 2010 | Identical |
| UNI EN 1374 : 2010 | Identical |
| UNE-EN 1374:2001+A1:2010 | Identical |
| NS EN 1374 : 2000 + A1 2010 | Identical |
| NBN EN 1374 : 2000 + A1 2010 | Identical |
| NEN EN 1374 : 2000 + A1 2010 | Identical |
| NF EN 1374 : 2000 + A1 2010 | Identical |
| I.S. EN 1374:2000 | Identical |
| PN EN 1374 : 2003 + A1 2010 | Identical |
| BS EN 1374 : 2000 | Identical |
| BS EN 1374:2000+A1:2010 | Identical |
| DIN EN 1374:2011-01 | Identical |
| IEC 60364-7-705:2006 | Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| HD 60364-7-705:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| HD 22-4 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 4: CORDS AND FLEXIBLE CABLES |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ISO 4254-1:2013 | Agricultural machinery — Safety — Part 1: General requirements |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN ISO 4254-1:2015 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.