EN 13035-7:2006+A1:2009
Current
Current
The latest, up-to-date edition.
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
Published date
12-02-2009
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or protective
measures
7 Information for use
Annex A (normative) - Noise-test code
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
1.1This European Standard applies for cutting machines for laminated glass including the following steps: transport and positioning, synchronous cutting (scoring) from both sides, break-out, electrical heating and separation.1.2This European Standard deals with the significant hazards, hazardous situations and events relevant to cutting machines for laminated glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Those hazards, which are dealt with in the ad-hoc standard EN 619 for conveyors are excepted. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Hazards from noise are not considered to be significant.1.3This European Standard is not applicable to cutting (scoring) and break-out of monolithic glass (see EN 13035-3 and EN 13035-6).1.4This European Standard is not applicable to the cutting of laminated glass by sawing or by the use of high-pressure liquid.1.5This European Standard is not applicable to the significant hazards of conveyors and machines for the manufacture, treatment and processing of flat glass such as tilting tables.1.6This European Standard is not applicable to cutting machines for laminated glass which are manufactured before the date of publication of this European Standard by CEN.
| Committee |
CEN/TC 151
|
| DevelopmentNote |
2006 Edition Re-issued in December 2009 & incorporates AMD 1 2009. (01/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 13035-7 : 2006 + A1 2010 | Identical |
| UNI EN 13035-7 : 2010 | Identical |
| NBN EN 13035-7 : 2006 + A1 2010 | Identical |
| BS EN 13035-7 : 2006 | Identical |
| NEN EN 13035-7 : 2006 + A1 2009 | Identical |
| NS EN 13035-7 : 2006 + A1 2009 | Identical |
| DIN EN 13035-7:2010-07 | Identical |
| I.S. EN 13035-7:2006 | Identical |
| NF EN 13035-7 : 2006 + A1 2010 | Identical |
| PN EN 13035-7 : 2006 + A1 2010 | Identical |
| PNE-EN 13035-7:2006/prA1 | Identical |
| UNE-EN 13035-7:2006+A1:2009 | Identical |
| BS EN 13035-7:2006+A1:2009 | Identical |
| BS EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory |
| BS EN 13035-11 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| BS EN 13035-3 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
| EN 13035-6:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| UNI EN 13035-5 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING |
| UNI EN 13035-11 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| 09/30181664 DC : 0 | BS EN 13035-4:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| BS EN 13035-5 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING |
| I.S. EN 13035-1:2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY |
| DIN EN 13035-9:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010) |
| DIN EN 13035-4:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009) |
| DIN EN 13035-3:2010-02 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| I.S. EN 13035-9:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| I.S. EN 13035-4:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| I.S. EN 13035-3:2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| DIN EN 13035-5:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (includes Amendment A1:2009) |
| BS EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory |
| UNI EN 13035-9 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| UNI EN 13035-4 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| UNI EN 13035-3 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| I.S. EN 13035-11:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| DIN EN 13035-2:2008-10 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
| 09/30181661 DC : 0 | BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES |
| I.S. EN 13035-2:2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
| BS EN 13035-6 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| DIN EN 13035-6:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009) |
| I.S. EN 13035-5:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING |
| EN 13035-3:2003 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
| BS EN 13035-4 : 2003 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES |
| BS EN 13035-9 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| EN 13035-5:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
| EN 13035-4:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
| DIN EN 13035-11:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010) |
| UNI EN 13035-6 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| I.S. EN 13035-6:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT |
| DIN EN 13035-1:2008-06 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 13035-3:2003 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
| CLC/TS 61496-2:2006 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| EN 13035-6:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
| EN 13035-5:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 13035-4:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
| EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.