DIN EN 60601-2-30 : 2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE SAFETY, INCLUDING ESSENTIAL PERFORMANCE, OF AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT
05-01-2011
01-12-2013
Vorwort
Einleitung
HAUPTABSCHNITT EINS - ALLGEMEINES
1 Anwendungsbereich und Zweck
2 Begriffe und Definitionen
3 Allgemeine Anforderungen
4 Allgemeines über die Prüfungen
5 Klassifikation
6 Bezeichnungen, Aufschriften und Begleitpapiere
HAUPTABSCHNITT ZWEI - UMWELTBEDINGUNGEN
HAUPTABSCHNITT DREI - SCHUTZ GEGEN DIE GEFAHR EINES
ELEKTRISCHEN SCHLAGES
14 Anforderungen in Bezug auf die Einteilung der Geräte
17 Trennung
19 Dauer-Ableit- und Patientenhilfsströme
20 Spannungsfestigkeit
HAUPTABSCHNITT VIER - SCHUTZ GEGEN MECHANISCHE GEFÄHRDUNG
21 Mechanische Festigkeit
22 Bewegte Teile
HAUPTABSCHNITT FÜNF - SCHUTZ GEGEN GEFAHREN DURCH UNERWÜNSCHTE
ODER ÜBERMÄSSIGE STRAHLUNG
36 Elektromagnetische Verträglichkeit
HAUPTABSCHNITT SECHS - SCHUTZ GEGEN GEFAHREN DURCH ZÜNDUNG
BRENNBARER GEMISCHE
HAUPTABSCHNITT SIEBEN - SCHUTZ GEGEN ÜBERMÄSSIGE TEMPERATUREN
UND ANDERE GEFÄHRDUNGEN
42 Übermässige Temperaturen
44 Überlaufen, Verschütten, Auslaufen, Feuchte, Eindringen
von Flüssigkeit, Reinigung, Sterilisation und Desinfektion
45 Druckbehälter und durch Druck beanspruchte Teile
49 Unterbrechung der Stromversorgung
HAUPTABSCHNITT ACHT - GENAUIGKEIT DER BETRIEBSDATEN UND
SCHUTZ GEGEN GEFÄHRDENDE AUSGANGSWERTE
50 Genauigkeit der Betriebsdaten
51 Schutz gegen gefährdende Ausgangswerte
HAUPTABSCHNITT NEUN - NICHT BESTIMMUNGSGEMÄSSER BETRIEB
UND FEHLERFÄLLE; UMWELTPRÜFUNGEN
HAUPTABSCHNITT ZEHN - KONSTRUKTIVE ANFORDERUNGEN
56 Bauelemente und Allgemeines zum Zusammenbau
57 Netzteile, Bauteile und Ausführung
Anhang L (normativ) Schriftstücke, auf die in dieser Norm
Bezug genommen wird
Anhang AA (informativ) Allgemeine Erklärung und Begründung
Anhang BB (informativ) Alarm-Diagramme
Anhang ZA (normativ) Normative Verweisungen auf Internationale
Publikationen mit ihren entsprechenden Europäischen
Publikationen
Anhang ZB (informativ) Andere in dieser Norm zitierte
internationale Publikationen mit den Verweisungen auf
die entsprechenden europäischen Publikationen
Specifies criteria for safety and essential performance of AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT, (referred to as equipment). The equipment may be attended or unattended. Does not apply to blood pressure measuring equipment which uses finger transducers or to semi-automatic blood pressure measuring equipment, where each determination typically needs to be initiated manually.
| DevelopmentNote |
Supersedes DIN IEC 62D-289-CDV. (03/2003)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| I.S. EN 60601-2-30:2000 | Identical |
| IEC 60601-2-30:1999 | Identical |
| VDE 0750-2-30 : 2016 | Corresponds |
| EN 60601-2-30:2000 | Identical |
| SN EN 60601-2-30 : 2000 | Identical |
| UNE-EN 60601-2-30:2001 | Identical |
| BS EN 60601-2-30:2000 | Identical |
| NF EN 60601-2-30 : 2002 | Identical |
| HD 395.2.2 : 200S1 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH FREQUENCY SURGICAL EQUIPMENT |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| DIN EN 60601-2-2 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES |
| VDE 0847-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| DIN VDE 0470-1 : 1992 | |
| VDE 0750-1-2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES REQUIREMENTS AND TESTS (IEC 60601-1-2:2014) |
| VDE 0750-2-2 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-2: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH FREQUENCY SURGICAL EQUIPMENT AND HIGH FREQUENCY SURGICAL ACCESSORIES |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| VDE 0847-4-8 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| IEC 60601-2-2:2017 | Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
| DIN EN 61000-4-6 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| DIN EN 61000-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| DIN EN 61000-4-8 : 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 60601-1-4:1996/A1:1999 | MEDICAL ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| VDE 0750-1-4 : 2001 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY; COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
| VDE 0847-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| VDE 0750-1 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| IEC 60601-1-4:1996+AMD1:1999 CSV | Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems |
| DIN EN 55011 : 2011 | INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 11:2015, MODIFIED + A1:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.