DIN EN 1452-2:1999-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES
Hardcopy , PDF
04-01-2010
English
01-12-2013
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen, Symbole und Abkürzungen
4 Werkstoff
4.1 Rohrwerkstoff
4.2 Dichte
4.3 Mindestfestigkeit (MRS-Wert)
5 Allgemeine Eigenschaften
5.1 Beschaffenheit
5.2 Farbe
5.3 Lichtundurchlässigkeit
6 Geometrische Eigenschaften
6.1 Messung der Masse
6.2 Nenn-Aussendurchmesser
6.3 Mittlere Aussendurchmesser und
zugehörige Grenzabmasse
6.4 Wanddicken und zugehörige Grenzabmasse
6.5 Länge des Rohres
6.6 Rohre mit Muffen
6.7 Rohre mit glatten Enden
7 Klassifizierung und Auswahl von Rohren
7.1 Klassifizierung
7.2 Auswahl des Nenndruckes PN und der
Rohrreihe S für Wasser bis etwa 20 grad C
7.3 Berechnung des zulässigen Betriebsdruckes
PFA für Wasser bis 45 grad C
8 Mechanische Eigenschaften
8.1 Widerstandsfähigkeit gegen äussere
Schlagbeanspruchung
8.2 Festigkeitseigenschaften bei der
Zeitstand-Innendruckprüfung
9 Physikalische Eigenschaften
10 Chemische Eigenschaften
11 Dichtringe
12 Klebstoffe
13 Anforderungen an die Verbindungen und die
Gebrauchstauglichkeit des Rohrleitungssystems
14 Kennzeichung
14.1 Allgemeines
14.2 Mindest-Kennzeichnung der Rohre
14.3 Zusätzliche Kennzeichnung
Anhang A (normativ) Zulässiger Betriebsdruck
Anhang B (normativ) Rohre mit Inch-Massen
Anhang C (normativ) Anforderungen für die
Prüfung auf Bruchzähigkeit
Anhang D (informativ) Literaturhinweise
This standard is included in DIN Handbook 62-2, 62 CD and 190. Defines the characteristics of pipes made from unplasticized poly (vinyl chloride) (PVC-U) for piping systems in the field of water supply.
| DevelopmentNote |
Supersedes DIN 19532 (10/1999)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 1452-2 : 1999 | Identical |
| EN 1452-2 : 1999 | Identical |
| NBN EN 1452-2 : 2000 | Identical |
| NEN EN 1452-2 : 1999 | Identical |
| SN EN 1452-2 : 1999 | Identical |
| BS EN 1452-2 : 2000 | Identical |
| I.S. EN 1452-2:1999 | Identical |
| NS EN 1452-2 : 1999 | Identical |
| UNI EN 1452-2 : 2001 | Identical |
| DIN HDBK 62 CD : 7ED 2004 | WASSERVERSORGUNG 2 - GUSS-, KUNSTSTOFF-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN |
| DIN 8062:2009-10 | Unplasticized polyvinyl chloride (PVC-U) pipes - Dimensions |
| DIN HDBK 62-2 : 8ED 2010 |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 1452-5 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ENV 1452-6 : DRAFT 2001 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 6: GUIDANCE FOR INSTALLATION |
| EN 743 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION |
| ENV 1452-7:2000 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| EN 578 : 1993 | PLASTICS PIPING SYSTEMS - PLASTICS PIPES AND FITTINGS - DETERMINATION OF THE OPACITY |
| ISO 161-2:1996 | Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 2: Inch-based series |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| ISO 7387-1:1983 | Adhesives with solvents for assembly of PVC-U pipe elements Characterization Part 1: Basic test methods |
| EN 921:1994/AC:1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| EN 744:1995 | Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
| ISO 6401:2008 | Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gas-chromatographic method |
| EN 580:2003 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| ISO/TR 9080:1992 | Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.