DIN EN 13135:2013-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
Available format(s)
Hardcopy , PDF
Superseded date
07-11-2020
Superseded by
Language(s)
German, English
Published date
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or protective
measures
7 Information for use
Annex A (informative) - Selection of a suitable set of crane
standards for a given application
Annex B (informative) - Design of rail wheel flanges
Annex C (informative) - Guidance on rope systems
Annex D (informative) - Specification of endurance of
equipment
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Describes requirements for the design and selection of electrical, mechanical, hydraulic and pneumatic equipment used in all types of cranes and their associated fixed load lifting attachments with the objectives of protecting personnel from hazards affecting their health and safety and of ensuring reliability of function.
| DevelopmentNote |
Supersedes DIN EN 13135-1 and DIN EN 13135-2. (05/2013) DRAFT AMD 1 issued in February 2016. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
73
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 13135:2013+A1:2018 | Identical |
| VDI 4467:2014-12 | Tandem operation of cranes/trolleys |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
| DIN 3991-3:1988-09 | Calculation of load capacity of bevel gears without pinion offset; calculation of tooth strength |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking |
| ISO 4306-1:2007 | Cranes — Vocabulary — Part 1: General |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| DIN ISO 4309:2013-06 | Cranes - Wire ropes - Care and maintenance, inspection and discard (ISO 4309:2010) |
| DIN 3990-1:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| ISO 12488-1:2012 | Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| DIN 3991-1:1988-09 | Calculation of load capacity of bevel gears without pinion offset; introduction and general influence factors |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN 12644-1:2001+A1:2008 | Cranes - Information for use and testing - Part 1: Instructions |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO/TR 14521:2010 | Gears Calculation of load capacity of wormgears |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| EN 13411-1:2002+A1:2008 | Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| DIN 3991-2:1988-09 | Calculation of load capacity of bevel gears without pinion offset; calculation of pitting resistance |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| DIN ISO 4347:2011-07 | LEAF CHAINS, CLEVISES AND SHEAVES - DIMENSIONS, MEASURING FORCES, TENSILE STRENGTHS AND DYNAMIC STRENGTHS (ISO 4347:2015) |
| ISO 10300-1:2014 | Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| DIN ISO 1940-1:2004-04 | MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE - PART 1: SPECIFICATION AND VERIFICATION OF BALANCE TOLERANCES |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 4347:2015 | Leaf chains, clevises and sheaves Dimensions, measuring forces, tensile strengths and dynamic strengths |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| ISO 10300-3:2014 | Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| ISO 2943:1998 | Hydraulic fluid power Filter elements Verification of material compatibility with fluids |
| DIN 3990-2:1987-12 | CALCULATION OF LOAD CAPACITY CYLINDRICAL GEARS; CALCULATION OF PITTING RESISTANCE |
| EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 12482-1:1995 | Cranes Condition monitoring Part 1: General |
| DIN 3990-3:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; CALCULATION OF TOOTH STRENGTH |
| ISO 10300-2:2014 | Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting) |
| CEN/TS 13001-3-2:2008 | Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.