DEFSTAN 02-120/2(2002) : INTERIM
Current
The latest, up-to-date edition.
REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES
Hardcopy , PDF
English
10-30-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
Categories of Standard
Related Documents
Health and Safety
Additional Information
CONTENTS
SECTION 1 - PERFORMANCE SPECIFICATION
1.1 Environmental Conditions
1.1.1 General Requirement
1.1.2 Ship Motion
1.1.3 Shock
1.1.4 Vibration
1.1.5 Noise
1.1.6 Temperature
SECTION 2 - NATIONAL/INTERNATIONAL REGULATIONS
SECTION 3 - MILITARY STANDARDS/REQUIREMENTS
3.1 Drawings
3.2 Materiel
3.3 Finish
3.3.1 Decor
3.3.2 Painting and Preservation
3.3.3 Linings
3.3.4 Insulation
3.3.5 Deck Coverings
3.4 Inspections and Tests
3.4.1 Line-outs
3.4.2 Inspections
3.4.3 Tests
3.4.3.1 Sanitary Flushing Systems
3.4.3.2 FW Supplies
3.4.3.3 Air Venting
SECTION 4 - DESIGN REQUIREMENTS/GUIDANCE
4.1 WC and Urinal Compartments
4.1.1 General and Design Requirements
4.1.2 Layout
4.1.3 Structural Requirements
4.1.4 Partition Bulkheads
4.1.5 Fittings to be Provided
4.1.6 Installation of Fittings
4.1.6.1 WC Pans
4.1.6.2 Urinal Bowls
4.1.6.3 Toilet Roll Holders
4.1.6.4 Spare Toilet Roll Stowages
4.1.6.5 Deodorizers
4.1.7 Services to be Provided
4.1.7.1 Deck Drains
4.1.7.2 Sewage Drains
4.1.7.3 Sea Water
4.1.7.4 Fresh Water
4.1.7.5 Ventilation
4.1.7.6 Venting Arrangements
4.1.7.7 Lighting
4.2 Bathrooms
4.2.1 General and Design Requirements
4.2.2 Layout of Communal Facilities
4.2.3 Structural Requirements
4.2.4 Partition Bulkheads
4.2.5 Fittings to be Provided
4.2.6 Installation of Fittings
4.2.6.1 Washing Positions
4.2.6.2 Shower Cubicles
4.2.6.3 Dressing Positions
4.2.6.4 H&C FW Draw-off Taps
4.2.7 Services to be Provided
4.2.7.1 Deck Drains
4.2.7.2 Washwater Drains
4.2.7.3 Hot and Cold Fresh Water (H&CFW)
4.2.7.4 Ventilation
4.2.7.5 Compartment Lighting
4.2.7.6 Contaminated Waste
4.2.8 Pipework and Associated Fittings
4.3 Private Bathrooms
4.3.1 General Requirements
4.3.2 Fittings to be Provided
4.3.3 Installation
4.3.3.1 Baths
4.3.3.2 Shower Units
4.3.3.3 WC Pans
4.3.3.4 Washbasins
4.3.3.5 Toilet Cabinets
4.3.3.6 Hinged Seats
4.3.3.7 Towel Rails
4.3.3.8 Hanging Rail
4.3.3.9 Hat and Coat Hooks
4.3.3.10 Deodorizers
4.3.3.11 Handholds
4.3.3.12 Shaver Sockets
4.3.3.13 Mirror Lights
4.3.4 Services to be Provided
4.3.4.1 Deck and Wash Water Drains
4.3.4.2 Hot and Cold Fresh Water
4.3.4.3 Ventilation
4.3.4.4 Lighting and Electrical Supplies
4.4 Washing Facilities
4.4.1 General Requirements
4.4.2 Fittings to be Provided
4.4.3 Installation
4.4.4 Services to be Provided
4.4.4.1 Washwater Drains
4.4.4.2 Hot and Cold Fresh Water
4.4.4.3 Electrical Supplies
4.5 Fittings
SECTION 5 - CORPORATE EXPERIENCE & KNOWLEDGE
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS
ANNEX C - PROCUREMENT CHECK LIST
ALPHABETICAL INDEX
Describes requirements for the provision, design and fitting out of Water Closets (WC) and Urinal Compartments, Bathrooms and miscellaneous Washing Facilities in HM Surface Ships and Submarines.
| DevelopmentNote |
Supersedes DEFSTAN 02-120/1(2000) (06/2003) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (07/2009)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| Supersedes |
| DEFSTAN 02-106(PT1)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL & DENTAL FACILITIES |
| DEFSTAN 02-129/2(2007) : 2007 | REQUIREMENTS FOR SOFT FURNISHINGS AND UPHOLSTERY FABRICS |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| DEFSTAN 02-106(PT2)/2(2010) : 2010 | REQUIREMENTS FOR MEDICAL & DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - MEDICAL AND DENTAL FACILITIES IN HM SURFACE SHIPS |
| DEFSTAN 02-107/2(2002) : 2002 | REQUIREMENTS FOR ACCOMMODATION IN HM SURFACE WARSHIPS AND SUBMARINES - CATEGORY 2 |
| DEFSTAN 02-106(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - MEDICAL AND DENTAL FACILITIES IN HM SURFACE SHIPS |
| DEFSTAN 02-157(PT2)/1(2000) : 2000 | REQUIREMENTS FOR DECK COVERINGS - PART 2: DECK/PREPARATION AND LAYING PROCEDURES CATEGORY 2 |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DEFSTAN 02-121(PT3)/1(2000) : 2000 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 3: SPECIFIC REQUIREMENTS FOR CONVENTIONAL SUBMARINES CATEGORY 2 |
| DEFSTAN 08-144/2(2001) : 2001 AMD 1 2003 | MATERIAL REQUIREMENTS FOR THE NBC DEFENCE OF HM SURFACE SHIPS INCLUDING RFA - CATEGORY 1 |
| DEFSTAN 07-205(PT2)/1(2000) : 2000 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - CATEGORY 2 - PART 2: SPECIFIC REQUIREMENTS - SURFACE SHIPS |
| DEFSTAN 07-251/1(2000) : 2000 | REQUIREMENTS FOR THE PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS - CATEGORY 2 |
| DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
| DEFSTAN 02-106(PT3)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - MEDICAL ORGANISATION FOR ACTION IN HM SURFACE SHIPS |
| DEFSTAN 02-130(PT2)/1(2000) : 2000 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS - PART 2: COMPOSITE BULKHEADS CATEGORY 2 |
| DEFSTAN 02-106(PT1)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 1: COMMON REQUIREMENTS - MEDICAL AND DENTAL FACILITIES |
| DEFSTAN 07-205(PT4)/1(2000) : 2000 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - CATEGORY 2 - PART 4: SPECIFIC REQUIREMENTS - NUCLEAR SUBMARINES |
| DEFSTAN 02-125/1(2000) : 2000 | REQUIREMENTS FOR NAAFI COMPARTMENTS IN SURFACE SHIPS AND SUBMARINES |
| BS EN 438-1:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Introduction and general information |
| DEFSTAN 02-728/2(2001) : INTERIM | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
| BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
| DEFSTAN 02-127/1(2000) : 2000 | ACCESS FITTINGS AND EQUIPMENT |
| DEFSTAN 02-130(PT1)/1(2000) : 2000 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS - PART 1: DECORATIVE LININGS CATEGORY 2 |
| BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
| DEFSTAN 02-722/1(2000) : 2000 | REQUIREMENTS FOR THE PREPARATION, IDENTIFICATION AND MANAGEMENTS OF DRAWINGS |
| DEFSTAN 02-587(PT1)/2(2001) : INTERIM | REQUIREMENTS FOR LIGHTING SYSTEMS - PART 1: SURFACE SHIPS CATEGORY 3 |
| DEFSTAN 02-720/2(2002) : 2002 | WASTE DISPOSAL POLICY |
| DEFSTAN 02-128/1(2000) : 2000 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS CATEGORY 2 |
| DEFSTAN 02-101(PT2)/1(2000) : 2000 | REQUIREMENTS FOR DESIGN AND FITTING OUT OF WORKSHOPS, MAINTENANCE SPACES AND ENGINEERING STORES FOR HM SURFACE SHIPS - PART 2: SPECIFIC REQUIREMENTS CATEGORY 2 |
| DEFSTAN 02-107/2(2002) : 2002 | REQUIREMENTS FOR ACCOMMODATION IN HM SURFACE WARSHIPS AND SUBMARINES - CATEGORY 2 |
| DEFSTAN 02-101(PT1)/1(2000) : 2000 | REQUIREMENTS FOR DESIGN AND FITTING OUT OF WORKSHOPS, MAINTENANCE SPACES AND ENGINEERING STORES FOR HM SURFACE SHIPS - PART 1:COMMON REQUIREMENTS CATEGORY 2 |
| DEFSTAN 02-703/1(2000) : 2000 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 02-721(PT1)/1(2000) : 2000 | GARBAGE DISPOSAL IN SURFACE SHIPS - PART 1: GENERAL REQUIREMENTS CATEGORY 2 |
| DEFSTAN 02-129/1(2000) : 2000 | REQUIREMENTS FOR SOFT FURNISHINGS AND FABRICS |
| DEFSTAN 07-252/1(2000) : 2000 | REQUIREMENTS FOR THE PREPARATION AND PAINTING OF SUBMARINES - CATEGORY 2 |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS EN 485-3:2003 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
| DEFSTAN 02-105(PT2)/1(2000) : 2000 | REQUIREMENTS FOR FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 2: SPECIFIC REQUIREMENTS - SURFACE SHIPS |
| DEFSTAN 02-106(PT4)/1(2000) : 2000 | REQUIREMENTS FOR MEDICAL AND DENTAL ORGANIZATION IN HM SURFACE SHIPS AND SUBMARINES - PART 4: MEDICAL AND DENTAL FACILITIES IN SUBMARINES |
| DEFSTAN 07-55(PT2)SEC1/1(1975) : 1975 AMD 3 1983 | ENVIRONMENTAL TESTING OF SERVICE MATERIAL - PART 2: TEST - SECTION 1: MECHANICAL |
| DEFSTAN 02-587(PT2)/1(2000) : 2000 | REQUIREMENTS FOR LIGHTING SYSTEMS - PART 2: SUBMARINES CATEGORY 3 |
| DEFSTAN 02-712/1(2000) : 2000 | REQUIREMENTS FOR SEWAGE AND GREY - WATER SYSTEMS FOR SURFACE SHIPS (OBSOLESCENT) CATEGORY 2 |
| DEFSTAN 02-157(PT1)/1(2000) : 2000 | REQUIREMENTS FOR DECK COVERINGS - PART 1: GENERAL REQUIREMENTS CATEGORY 2 |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| DEFSTAN 02-360/1(2000) : 2000 | LIST OF PREFERRED STANDARD VALVES (METRIC) (LOW PRESSURE) |
| DEFSTAN 02-105(PT3)/1(2000) : 2000 | REQUIREMENTS FOR THE FITTING OUT OF OFFICES (EXCLUDING OPERATIONAL/COMMUNICATION OFFICES) IN HM SURFACE SHIPS AND SUBMARINES - PART 3: SPECIFIC REQUIREMENTS - SUBMARINES CATEGORY 3 |
| DEFSTAN 02-102(PT1)/2(2000) : 2000 | REQUIREMENTS FOR AIR CONDITIONING & VENTILATION - PART 1: HM SURFACE SHIPS AND ROYAL FLEET AUXILIARIES |
| DEFSTAN 02-709(PT3)/1(2000) : 2000 | MODELS, MOCKUPS AND LINEOUTS - PART 3: LINEOUTS CATEGORY N/A |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
| DEFSTAN 02-139/1(2000) : 2000 | CODE OF PRACTICE FOR SHIP HUSBANDRY (THIS STANDARD IS ONLY TO BE USED FOR SUBMARINES UNTIL ISSUE OF PART 2) |
| DEFSTAN 07-205(PT1)/1(2000) : 2000 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - CATEGORY 2 - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-797(PT4)/1(2000) : 2000 | PIPEWORK ENGINEERING - PART 4: SCREWED FITTINGS CATEGORY 2 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.