CSA ISO/IEC 18046-2:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
Available format(s)
Hardcopy , PDF
Superseded date
10-01-2017
Superseded by
Language(s)
English
Published date
01-01-2017
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Conditions applicable to the test methods
6 Setup of test equipment for interrogator test
7 Functional tests for inductive interrogators as defined in
ISO/IEC 18000-2 and ISO/IEC 18000-3
8 Functional tests for interrogators as defined in ISO/IEC
18000-6
9 Functional tests for 433,920 MHz propagative interrogators
as defined in ISO/IEC 18000-7
Bibliography
Specifies test methods for performance characteristics of RFID interrogators for item management, and specifies the general requirements and test requirements for interrogators which are applicable to the selection of the devices for an application.
| DevelopmentNote |
Supersedes CSA ISO/IEC 18046. (01/2013)
|
| DocumentType |
Standard
|
| Pages |
42
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO/IEC 18046-2:2011 | Identical |
| ISO/IEC 15962:2013 | Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions |
| ISO/IEC TR 18047-4:2004 | Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz |
| ISO/IEC TR 18047-7:2010 | Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface communications at 433 MHz |
| ISO/IEC TR 18047-3:2011 | Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz |
| ISO/IEC 18000-6:2013 | Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
| EN 300 440-1 : 1.6.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES; RADIO EQUIPMENT TO BE USED IN THE 1 GHZ TO 40 GHZ FREQUENCY RANGE; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO/IEC 15963:2009 | Information technology Radio frequency identification for item management Unique identification for RF tags |
| ISO/IEC 15961:2004 | Information technology Radio frequency identification (RFID) for item management Data protocol: application interface |
| EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| EN 300 330-2 : 1.6.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| EN 300 330-1 : 1.8.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 300 440-2 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES; RADIO EQUIPMENT TO BE USED IN THE 1 GHZ TO 40 GHZ FREQUENCY RANGE; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| EN 300 220-2 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1 000 MHZ - PART 2: HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM FOR NON SPECIFIC RADIO EQUIPMENT |
| ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
| EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
| ISO/IEC TR 18047-2:2006 | Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.