BS EN 62282-6-100 : 2010
Current
The latest, up-to-date edition.
FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY
Hardcopy , PDF
English
01-01-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and construction of micro fuel cell power
systems, micro fuel cell power units and fuel cartridges
5 Abnormal operating and fault conditions testing and
requirements
6 Instructions and warnings for micro fuel cell power
systems, micro fuel cell power units and fuel cartridges
7 Type tests for micro fuel cell power systems, micro fuel
cell power units and fuel cartridges
Annex A (normative) - Formic acid micro fuel cell power
systems
Annex B (normative) - Hydrogen stored in hydrogen
absorbing metal alloy and micro fuel cell
power systems
Annex C (normative) - Reformed methanol micro fuel
cell power systems
Annex D (normative) - Methanol clathrate compound
micro fuel cell power systems
Annex E (normative) - Borohydride micro fuel cell power
systems: Class 8 (corrosive) compounds in
indirect borohydride fuel cells
Annex F (normative) - Borohydride micro fuel cell power
systems: Class 4.3 (water reactive) compounds
in indirect borohydride fuel cells
Annex G (normative) - Borohydride micro fuel cell power
systems: Class 8 (corrosive) compounds
in direct borohydride fuel cells
Annex H (normative) - Butane solid oxide micro fuel cell
power systems
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Includes micro fuel cell power systems, micro fuel cell power units and fuel cartridges that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA.
| Committee |
GEL/105
|
| DevelopmentNote |
Supersedes 05/30106456 DC. (05/2010) 2010 Edition Re-Issued in March 2013 and incorporates AMD 1 2012. (03/2013)
|
| DocumentType |
Standard
|
| Pages |
376
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Identical |
| EN 62282-6-100:2010/A1:2012 | Identical |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| IEC 62281:2016 | Safety of primary and secondary lithium cells and batteries during transport |
| IEC 60695-1-1:1999 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| EN 62281:2017 | Safety of primary and secondary lithium cells and batteries during transport |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN 60086-5:2016 | Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| EN 61032:1998 | Protection of persons and equipment by enclosures - Probes for verification |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| EN 60086-4:2015 | Primary batteries - Part 4: Safety of lithium batteries |
| IEC 60086-5:2016 | Primary batteries - Part 5: Safety of batteries with aqueous electrolyte |
| IEC 60086-4:2014 | Primary batteries - Part 4: Safety of lithium batteries |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| EN 60695-1-1:2000 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| EN 62133:2013 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.