BS EN 500-2 : 2006
Current
The latest, up-to-date edition.
MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES
Hardcopy , PDF
English
01-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 Lighting, signalling and marking lights and
reflex-reflector devices
5.2 Operation and handling
5.3 Operator's station
5.4 Operator's seat
5.5 Controls and indicators
5.6 Starting
5.7 Stopping
5.8 Access system to operator's station and to
maintenance points
5.9 Protection
5.10 Pressurised systems
5.11 Fire protection
5.12 Hot surfaces
5.13 Signal devices and warning signs
5.14 Liquid gas units
5.15 Electrical and electronic systems
5.16 Electro-magnetic compatibility (EMC)
5.17 Noise and vibration
5.18 Conveyors
6 Verification of safety requirements and/or
protective measures
7 Information for the user
Annex A (normative) Noise test code for road-milling
machines
Annex B (informative) Examples of road-milling machines
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EC Directive 98/37/EC
Bibliography
Figures
Describes the safety requirements for road-milling machines and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse, which are reasonably foreseeable.
| Committee |
B/513/1
|
| DevelopmentNote |
Supersedes 91/14879 DC. (09/2005) Supersedes 02/101173 DC. (09/2008) 2006 Edition Re-Issued in July 2009 & incorporates AMD 1 2008. To be read in conjunction with BS EN 500-1. (08/2009)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 500-2:2006 | Identical |
| UNE-EN 500-2:2007 | Identical |
| NF EN 500-2 : 2006 + A1 2008 | Identical |
| SN EN 500-2 : 2007 + A1 2009 | Identical |
| EN 500-2:2006+A1:2008 | Identical |
| UNI EN 500-2 : 2009 | Identical |
| NEN EN 500-2 : 2006 + A1 2008 | Identical |
| NBN EN 500-2 : 2006 + A1 2009 | Identical |
| DIN EN 500-2:2009-05 | Identical |
| NS EN 500-2 : 2006 + A1 2008 | Identical |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 811 : 1996 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 8643:2017 | Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.