BS EN 15651-2:2017
Current
The latest, up-to-date edition.
Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing
Hardcopy , PDF
English
09-06-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Durability
6 Sampling
7 Assessment and verification of constancy
of performance
8 Marking and labelling
Annex A (informative) - Example on the frequency
of tests for factory production control
Annex ZA (informative) - Relationship of this
European Standard with Regulation (EU)
No.305/2011
Bibliography
Defines definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications.
| Committee |
B/547
|
| DevelopmentNote |
Supersedes 07/30164611 DC. (03/2010) Supersedes 12/30254135 DC. (09/2012)
|
| DocumentType |
Standard
|
| ISBN |
9780539023121
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies definitions and requirements for non-structural elastic sealants used for sealing glazing in building construction applications. It covers glazing joints from 7° horizontal. Main areas of application are: - glass to glass; - glass to frame; - glass to porous substrates. Excluding aquariums, structural bonding/glazing, inner and outer seal to manufacture insulated glazing units, horizontal glazing (below 7°), organic glass (e.g. polycarbonate, PMMA, etc.).
| Standards | Relationship |
| EN 15651-2:2017 | Identical |
| BS 6093(2006) : 2006 | DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE |
| 13/30277948 DC : 0 | BS 6093:2006+A1 - DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 11432:2005 | Building construction Sealants Determination of resistance to compression |
| ISO 9047:2001 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 6927:2012 | Buildings and civil engineering works Sealants Vocabulary |
| EN ISO 7389:2003 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
| EN ISO 7390:2003 | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003) |
| EN ISO 9046:2004 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) |
| EN ISO 11432:2005 | Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005) |
| ISO 7389:2002 | Building construction Jointing products Determination of elastic recovery of sealants |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 10590:2005 | Building construction Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water |
| ISO 11600:2002 | Building construction Jointing products Classification and requirements for sealants |
| ISO 7390:2002 | Building construction Jointing products Determination of resistance to flow of sealants |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN ISO 10591:2005 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| ISO 10563:2017 | Buildings and civil engineering works — Sealants — Determination of change in mass and volume |
| EN ISO 10590:2005 | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) |
| ISO 11431:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| EN 15651-5:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling |
| ISO 10591:2005 | Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 8340:2005 | Building construction Sealants Determination of tensile properties at maintained extension |
| ISO 13640:1999 | Building construction Jointing products Specifications for test substrates |
| EN ISO 11431:2002 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
| EN ISO 6927:2012 | Buildings and civil engineering works - Sealants - Vocabulary (ISO 6927:2012) |
| ISO 9046:2002 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8339:2005 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
| EN ISO 10563:2017 | Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) |
| ISO 8339:2005 | Building construction Sealants Determination of tensile properties (Extension to break) |
| EN ISO 8340:2005 | Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005) |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 3507:1999 | Laboratory glassware — Pyknometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.